polysan 72099S VIVA Asymmetric Baths Instruction Manual
- June 12, 2024
- Polysan
Table of Contents
polysan 72099S VIVA Asymmetric Baths
Product Information:
- Product Name: PO60-60
- Product Model: PO80-80
- Product Code: PO100-100
- Additional Models: PO60-80, PO60-100
- Quantity: 4x 8×40, 4x 4x 4×40, 2x 12x, 4×11, 4x M12x125mm, 12x M12
- Material: SILICONE
- Manufacturing Date: MN001/2021/01/N10000/1.21
- Art.no.: 91020
Product Usage Instructions
- Ensure that the surface where the product will be applied is clean and dry.
- Take the desired quantity of the product from the package.
- Apply a thin layer of SILICONE on the surface
- Use a suitable tool to spread the SILICONE evenly.
- Wait for 2-6 mm of SILICONE to dry
- Apply another layer of SILICONE if necessary.
- For Acrylic panel installation, follow the instructions below:
- Place the Acrylic panel on the desired location
- Apply SILICONE on the edges of the Acrylic panel.
- Wait for 24 hours for the SILICONE to fully cure
- Calculate ‘a’ value by adding ‘b’ and 17.
- Check if ‘a’ is equal to ‘b’ + 17.
- If ‘a’ is equal to ‘b’ + 17, proceed to the next step.
- Press OK to confirm the installation.
- If you want to cancel the installation, press NO.
- Repeat steps 3-13 for each panel or surface you want to install.
- For special instructions, refer to step a) or b) mentioned in the previous steps.
- For any additional information, please refer to step 16
- After 24 hours, the SILICONE will be fully cured and ready for use.
- For any queries or assistance, contact customer support at Art.no. 91020.
Note: This is a general usage guide. Please refer to the complete user manual for detailed instructions and safety
Mounting instructions
How to assemble?
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>