ASUS MB166CR Portable USB Monitor User Guide

ASUS MB166CR Portable USB Monitor User Guide

MB166CR

Portable USB Monitor

User Guide

Copyright © 2021 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be  reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any  language in any form or by any means, except documentation kept by the purchaser for  backup purposes, without the express written permission of ASUSTeK COMPUTER INC.  (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES  OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE  OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN  ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR  ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED  FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME  WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY  ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR  INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS  AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered  trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Notices

Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject  to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received including  interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference  in a residential installation. This equipment generates, uses and can  radiate radio frequency energy and, if not installed and used in accordance  with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will  not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to  which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio  noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

NOTE: This monitor is ENERGY STAR certified.

This product qualifies for ENERGY STAR in the factory default setting which can be restored by “Factory Reset”  function in the OSD menu. Changing the factory default settings or enabling other features may increase power consumption that could exceed the ENERGY STAR  specified limits.

Declaration of Conformity

This device complies with the requirements set out in the Council  Directive on the Approximation of the Laws of the Member States  relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage  Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive  (2011/65/EU). This product has been tested and found to comply with  the harmonized standards for Information Technology Equipment, these  harmonized standards published under Directives of Official Journal of the  European Union.

WEEE Symbol Statement

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is  your responsibility to dispose of your waste equipment by handing it over  to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources  and ensure that it is recycled in a manner that protects human health and  the environment. For more information about where you can drop off your  waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the  product.

Safety information

• Before setting up this Portable USB Monitor, carefully read all the  documentation that came with the package.
• To prevent fire or shock hazard, never expose this Portable USB  Monitor to rain or moisture.
• Never try to open this Portable USB Monitor cabinet.
• Before using this Portable USB Monitor, make sure all cables are  correctly connected and the power cables are not damaged. If you  detect any damage, contact your dealer immediately.
• Avoid dust, humidity, and temperature extremes. Do not place this  Portable USB Monitor in any area where it may become wet. Place this  Portable USB Monitor on a stable surface.
• Never push objects or spill liquid of any kind into the slots on this  Portable USB Monitor cabinet.
• If you encounter technical problems with this Portable USB Monitor,  contact a qualified service technician or your retailer.
• This Portable USB Monitor is powered by USB port which complies  with LPS and SELV circuit according to IEC60950-1:2005.

WARNING

Usage of other than specified head- or earphones can result in hearing  loss due to excessive sound pressures.

Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum).

If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding  pin is an important safety feature.

Stability Hazard.

The product may fall, causing serious personal injury or death. To  prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions.

A product may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

ALWAYS use cabinets or stands or installation methods recommended by  the manufacturer of the product set.

ALWAYS use furniture that can safely support the product.

ALWAYS ensure the product is not overhanging the edge of the supporting furniture.

ALWAYS educate children about the dangers of climbing on furniture to  reach the product or its controls.

ALWAYS route cords and cables connected to your product so they cannot  be tripped over, pulled or grabbed.

NEVER place a product in an unstable location.

NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a  suitable support.

NEVER place the product on cloth or other materials that may be located between the product and supporting furniture.

NEVER place items that might tempt children to climb, such as toys and  remote controls, on the top of the product or furniture on which the product  is placed.

If the existing product is going to be retained and relocated, the same considerations as above should be applied.

Care & cleaning 

• Cleaning. Turn your monitor off and unplug the cable. Clean the  monitor surface with a lint-free, non-abrasive cloth. Stubborn stains  may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner  intended for use with the LCD. Never spray cleaner directly on the  screen, as it may drip inside the monitor and cause an electric shock.
• Please use [clean water] only as the cleaning method.

The following symptoms are normal with the monitor:

• You may find slightly uneven brightness on the screen depending on  the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the  previous screen may remain after switching the image. The screen will  recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,  contact your dealer or service center to fix it. Do not repair the screen  by yourself!

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to  complete a task.

CAUTION: Information to prevent damage to the components  when trying to complete a task.

IMPORTANT: Information that you MUST follow to complete a  task.

NOTE: Tips and additional information to aid in completing a task.

Where to find more information

Refer to the following sources for additional information and for product  and software updates.

1. ASUS websites
   The ASUS websites worldwide provide updated information on ASUS  hardware and software products. Refer to http://www.asus.com

2. Optional documentation
   Your product package may include optional documentation that may  have been added by your dealer. These documents are not part of  the standard package.

Takeback services

ASUS recycling and takeback programs come from our commitment to the  highest standards for protecting our environment. We believe in providing  solutions for our customers to be able to responsibly recycle our products,  batteries and other components as well as the packaging materials.

Please go to http://csr.asus.com/english/Takeback.htmfor detail  recycling information in different region.

Product information fro EU energy label

Welcome!

Thank you for purchasing the ASUS® Portable USB Monitor!

The latest ASUS Portable USB Monitor provides great portability and simplicity to your daily life, enhancing both of your viewing experience and style.

Package contents

Check your package for the following items:

Portable USB Monitor

Quick Start Guide

Warranty Card

USB Type-C Cable

Protective Sleeve

360° kickstand

• If any of the above items is damaged or missing, contact your retailer  immediately.

Monitor introduction

**Front view

**

1. Power button/Power LEDP

   • Press this button to turn the monitor on/off.
   • The color definition of the power indicator is as the below table.

2. Menu button

   • Press this button to enter the OSD menu.

3. Brightness

   • Adjust the energy level of brightness.

4. USB Type-C Port

QuickFit Function

The QuickFit function contains two patterns: (1) Grid (2) Photo size.

1. Grid pattern: Facilitates designers and users to organize content and  layout on one page and achieve a consistent look and feel.
   Alignment grid 1 will be rotated automatically if auto rotation is  enabled.

   • Auto rotation function is only working under Windows OS by installing DisplayWidget Center software.

2. Photo size: Provides photographers and other users to accurately view and edit their photos in real size on the screen.

Monitor standing positions **

**

360° kickstand with drawstring pockets

Connect the USB monitor with system

Please make sure the host system connected supports USB Type C  “DisplayPort™ Alt Mode ” & USB Type C cable is correctly connected  between USB monitor and the host system.

OSD (On-Screen Display) menu

****How to reconfigure

1. Press the MENU button to activate the OSD menu.
2. Press the ▼ button to toggle between options in the Menu. As you  move from one icon to another, the option name is highlighted.
3. To select the highlighted item on the menu press the button.
4. Press the ▼ button to select the desired parameter.
5. Press the button to enter the slide bar and then use the ▼ button, according to the indicators on the menu, to make your  changes.
6. Select the to return to previous menu or to accept and return  to previous menu.

OSD Function Introduction

1. Splendid
   This function contains eight sub-functions that you can select for your preference.

• Standard Mode : This is the best choice for document editing with  SPLENDID™ Video Intelligence Technology.

• sRGB Mode : This is the best choice for viewing photos and graphics  from PCs.

• Scenery Mode : This is the best choice for scenery photo displaying with  SPLENDID™ Video Intelligence Technology.

• Theater Mode : This is the best choice for movie watching with  SPLENDID™ Video Intelligence Technology.

• Game Mode : This is the best choice for game playing with SPLENDID™  Video Intelligence Technology.

• Night View Mode : This is the best choice for playing dark-scene game  or watching dark-scene movie with SPLENDID™ Video Intelligence  Technology.

• Reading Mode : This is the best choice for book reading.

• Darkroom Mode : This is the best choice for a weak ambient light  environmen.

• In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR  functions are not user-configurable.

• In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,  Contrast and ASCR functions are not user-configurable.

• In the Reading Mode, the Saturation, SkinTone, Sharpness, ASCR, contrast,  and Color Temp functions are not user-configurable.

2. Blue Light Filter
   Adjust the energy level of blue light emitted from LED backlight.

• Level 0 : No change.

• Level 1~4 : The higher the level,the more blue light will be reduced.

• When Blue Light Filter is activated,the default settings of Standard Mode will  be automatically imported.

• Between Level 1 to Level 3, the Brightness function is user-configurable.

• Level 4 is optimized setting. It is compliance with TUV Low Blue Light  Certification. The Brightness function is not user-configurable.

Please refer to the following to alleviate eye strains:

• Users should take some time away from the display if working for long hours.  It is advised to take short breaks (at least 5 mins) after around 1 hour of  continuous working at the computer. Taking short and frequent breaks is more  effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye  periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises often. If  eye strain continues please consult a physician. Eye exercises: (1) Repeating  look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related Macular  Degeneration). Blue light Filter to reduce 70% (max.) harmful blue light to  avoiding CVS (Computer Vision Syndrome).

3. Color
   Select the image color you like from this function.

• Brightness : The adjusting range is from 0 to 100.

• Contrast : The adjusting range is from 0 to 100.

• Saturation : The adjusting range is from 0 to 100.

• Color Temp. : Contains three preset color modes ( Cool , Normal , Warm )  and User Mode.

• Skin Tone : Contains three color modes including Reddish , Natural , and  Yellowish.

• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user configurable; the adjusting range is from 0 ~ 100.

4. Image
   You can adjust the image Sharpness, Trace Free, Aspect Control,  VividPixel and ASCR from this main function.

• Sharpness : Adjusts the picture sharpness. The adjusting range is from  0 to 100.

• Trace Free : Speeds up the response time by Over Drive technology. The  adjusting range is from lower 0 to faster 100.

• Aspect Control : Adjusts the aspect ratio to “ Full ”, “ 4:3 ”.

• VividPixel : ASUS Exclusive Technology that brings lifelike visuals for  crystal-clear and detail-oriented enjoyment. The adjusting range is from  0 to 100.

• ASCR : Select ON or OFF to enable or disable dynamic contrast ratio  function.

• 4:3 is only available when input source is in 4:3 format.

5. System Setup
   Adjusts the system configuration.

• Splendid Demo Mode : Activate the demo mode for the Splendid  function.

• Auto Rotation: To enable/disable rotate image automatically.Please be  noted that Auto rotation function is only working under Windows OS by  installing DisplayWidget Center software.

• GamePlus : The GamePlus Function provides a toolkit and creates a  better gaming environment for users when playing different types of  games. Particularly, Chrosshair function is specially designed for new  gamers or beginners interested in First Person Shooter (FPS) games. To active GamePlus:

  • Select ON to enter the GamePlus main menu.
  • Press to select between Chrosshair, Timer and Display Alignment  function.
  • Press to confirm the function you choose. Select to go off, and  exit.

• For the latest version of DisplayWidget Center software, please go to www. asus.com product page to download and install.

• QuickFit : See page 1-3 for details.
• ECO Mode : Activate the ecology mode for power saving.
• OSD Setup : Adjusts the OSD Timeout , DDC/CI , and Transparency of  the OSD screen.
• Language : Select OSD language. The selections are: English , French ,  German , Spanish , Italian , Dutch , Russian , Poland , Czech , Croatia ,  Hungary , Romania , Portugal , Turkey , Simplified Chinese , Traditional Chinese , Japanese , Korean , Persian , Thai , Indonesian, Ukrainian.
• More : Return the next page of System Setting.
• Key Lock : Disable all key functions. Pressing the menu button for more  than five seconds to disable key lock function.
• Information :Displays the monitor information.
• Power Indicator : Turn the power LED indicator on/off.
• Power Key Lock : To disable / enable power key.
• All Reset : Selects “ Yes ” to revert all settings to the factory default mode.

6. Shortcut
   Selecting this option allows you to set shortcut key.

• Shortcut : User can select from “Blue Light Filter” “Splendid”,  “Brightness”, “Contrast”, “Auto Rotation”, “Color Temp.”,  “QuickFit”, “GamePlus” and set as shortcut key.

7. MyFavorite
   Load/Save all settings on the monitor.

DisplayWidget Center

Please go to MB166CR official website, find “Support” tab and choose  “Driver &Utility” to download latest DisplayWidget Center.

Please always connect your MB166CR to input device FIRST , and then  turn on DisplayWidget Center.

We also suggest you to create a shortcut of DisplayWidget Center on your computer desktop for easier activation.

Specifications

*Specifications are subject to change without notice.

Troubleshooting (FAQ)

Problem Possible Solution

Power LED is not ON| • Press the button to check if the monitor is  in the ON mode.

• Check if the USB Type-C cable is

properly connected to the monitor and the  computer.

The power LED lights amber  and there is no screen image| • Check if the monitor and the computer are in  the ON mode.

• Make sure the USB Type-C cable is properly  connected between the Portable USB Monitor  and the computer.

• Inspect the signal cable and make sure none  of the pins are bent.

• Connect the computer with another available  monitor to check if the computer is properly  working.

Screen image is too light or  dark| • Adjust the Brightness settings via the button.
Screen image bounces or a  wave pattern is present in the  image| • Make sure the USB Type-C cable is properly  connected between the Portable USB Monitor and the computer.

• Move electrical devices that may cause  electrical interference.

Screen image has color  defects (white does not look  white)| • Inspect the USB Type-C cable and make sure  that none of the pins are bent.

Problem Possible Solution

After connecting with the  USB Type-C source device, the power LED lights

continuously blinking or

showing ASUS logo repeatly

|

• Insufficient power supply from source USB  Type-C devices. Please follow below steps:
• Press the left function key, and then connect  the USB Type-C cable. This operation will  enable built-in safe mode. After displaying  ASUS logo, please release the Blue Light  Filter button. After ASUS Logo disappearing,  there is “safe mode” message OSD showing  up. Once “safe mode” message OSD disappears, please set background color to  white image or nearly white image (*1).
• Press MENU button, main menu OSD is  showing. The upper left corner of the OSD will  display small red-colored font “S”, indicating it  is now in safe mode. Enter brightness setup,  press the up key to tune up brightness. During  the process, please note down brightness  value “Y” up until MB166CR re-start.(*2). For  example, if brightness value shows “70” and  MB166CR restarts when adjusting to “71”,  “70” is the “Y” value to note down and is the  highest brightness value for the connecting  USB-C source device.
• Press MENU button, main menu OSD is  showing. The upper left corner still indicate  “S” as safe mode. Adjust the OSD brightness  value to “Y”
• Close the OSD and press Low Blue Low Filter  hot key for 5 seconds to turn off safe mode.
• Complete.

*1: White color background will consume higher power, so it’s better to use  white color background to test the power limit from source USB Type-C  device.

*2: If MB166CR does not re-start when adjusting to value 100, that means  source USB Type-C device has sufficient power supply.

Supported Timing List

PC Supported Primary Timing

IBM Modes, Factory Preset Timing

VESA Modes, User Available Timing

References

• ASUS Global
• ASUS Global
• ASUS Deutschland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>