Fujifilm Fujicolor 200 Color Negative Film ISO 200, 35mm Size, 36 Exposure-Complete Features.Instruction Manual

Fujifilm Fujicolor 200 Color Negative Fil ISO 200, 35mm Size, 36 Exposure

Specifications

• BRAND : Fujifilm
• FILM FORMAT TYPE : 35mm
• EXPOSURES PER ROLL : 36
• ISO EQUIVALENT : 200
• PRODUCT DIMENSIONS : 4.3 x 2.1 x 1.6 inches
• ITEM WEIGHT: 0.16 ounces

If you want high-quality photographs with a nice, nostalgic feel, there’s nothing like shooting on film. Taking images with a 35mm camera is a completely different experience from taking photos with a digital camera. The FujiFilm have Excellent processing robustness and consistency. It gives the high resolution and crispness. It is designed for both daylight and electronic flash exposure. It includes 200 ISO. It also has 36 photographic exposures.

How to use FujiFilm Colour Negative Film

If you want to try your hand at film photography, you’ll need to learn how to load a film camera first.

• Pull up on the Rewind Knob, which is located on the left side of the camera, until the back of the camera opens.
• To load your film into the Take-Up Spool, cut a Leader. To fit into the spool, the leader must be roughly 22mm long.
• Place the film in the camera’s left side. After inserting the film into the pocket, lower the Rewind Knob to establish a snug fit.
• Bring the film’s leader over to the Take-Up Spool. Insert the film leader’s thin end into the slot. With one hand, hold the spool steady and press the film deep within until it is completely inside the spool or comes out the other side.
• On both sides of the film, double-check that the teeth are appropriately positioned. To secure the film to the camera, use the rewind knob to take in any slack. Then close the rear of the camera and wound the film using the film advance.
• Take three photos. The rewind knob will revolve every time you crank the film advance lever if the film has been correctly loaded. If not, tighten the film to the camera again to make sure the slack has been removed. Take at least two photos to wipe away the exposed film and start over with new film. You’re ready to take images once you see the number 1 in the window.
• It’s now time to choose an ISO Film Speed. To change the film speed, gradually raise the ISO speed ring and turn it to the ISO speed indicated in the window. (The numbers on the ring’s INSIDE window should spin as a result of this.)
• Rotate the shutter speed ring to the desired shutter speed to set the shutter speed. On this camera, the shutter determines the length of exposure; the higher the number, the shorter the exposure time. (The numbers on the OUTSIDE of the ring should spin as a result of this)
• Turn the aperture ring to the desired aperture to set the aperture. The narrower the aperture opening is, the less light is passed to the film, and the larger the aperture number is.
• A built-in metre is included with this camera. The metre is activated when you press the shutter release button down about a third of the way. Rotate the shutter speed dial or the aperture ring until just the green o LED is lighted while the metre is turned on. The red + LED light indicates that your subject is overly bright. Change the shutter speed or aperture to compensate. The red – LED light indicates that your subject is excessively dark. Reduce the shutter speed or the aperture. For the greatest outcomes, the goal is to achieve the green o LED light.
• Push down on the self-timer lever until it stops to set a timer. When you’re ready to shoot the picture, fully depress the shutter release button to start the timer. In ten seconds, the snapshot will be taken. (The length of the timer may vary depending on the camera’s brand and type.)
• You must rewind the roll of film back into the canister once it is finished. Press the film release button on the bottom of the camera to rewind your film. Fold out the film rewind crank and turn it in the arrow’s direction until no more tension is felt on the knob.
• Pull up on the film rewind knob until the camera’s back cover pops open. The film should now be wrapped back into the film canister and ready for development.

Frequently Asked Questions

• What is the shelf life of undeveloped 35mm film?
  This is usually two years after the month of manufacturing, which is a “best if used by” date. In terms of quality, the older the film is, the more unpredictable it will be.\

• Is Fuji moving away from the film?
  Fujifilm has announced that a few more film products would be phased out. Fujicolor 160NS Professional 120 film and Velvia 50 in 45 and 810 sheet sizes are the most recent to be discontinued.

• Is Fujifilm Simulation applicable to raw files?
  Using the camera’s built-in raw processor, you may add true FUJIFILM film simulations to your raw photographs in the camera. The camera will save a separate JPEG file on your memory card once you finish processing and applying the simulation, while keeping the raw image.

• How long does 35mm film last?
  Colour and black-and-white 35mm film, like all other camera film types except instant film, expires 2-3 years after it is made. Colour film, on the other hand, is more susceptible to alterations after it has expired than black and white film.

• What is the maximum amount of time exposed film can be left on the shelf?
  Professional films can be stored for up to a few days after exposure, according to Kodak’s recommendations, although best results are obtained by developing immediately after exposure. Most films can be kept in the fridge for up to six months before being processed without developing any faults.

• Why does film have an expiration date?
  The chemicals on the film lose their efficacy over time and begin to degrade. Silver halides in the emulsion of the films deteriorate and lose their sensitivity. Colours will lose their brilliance, contrasts will fade, and grain will increase as a result. The expired film eventually gets hazy and useless.

• Why did Fuji discontinue film production?
  While we might scream and moan about how unfair it all is, there’s no point: Fujifilm has plainly decided to phase out several of its films as a result of a pincer movement of supply concerns and dwindling demand, and further cutbacks are likely on the way.

• Why did Fuji stop producing 400h?
  The announcement stunned photographers all over the world, as this was one of their best-selling films and the only professional-grade colour negative film in their lineup. The film was discontinued by Fuji due to increased material costs for the film’s fourth layer.

https://www.instructables.com/How-To-Load-Film-into-a-35mm-Camera/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>