EOIWUY G10 Mag Safe Car Mount Charger User Manual
- June 1, 2024
- EOIWUY
Table of Contents
EOIWUY G10 Mag Safe Car Mount Charger
Product Diagram
Specifications
| Model | G19 |
|---|---|
| Input | 9V=2A(Max) |
| Output | 15W(Max) |
| Material | PC+ABS |
| Dimension | cp65mm’32mm(H) |
| Weight(Include Hook) | 92g |
User Instruction
- Unscrew the locking nut from the back of the mount and place it around the ball joint, pushing it into the back of the mount.
- Tighten the nut clockwise.
- Attach the mount on the car air vent: Tum the locking knob to adjust the length of the hook until the handle is locked securely onto the air vent.
Note
There are two interchangeable baffles are available regular baffle for square
air vents and triangular baffle for round air vents
- Connect the power supply using the cable and car charger included. Note: Must use the car charger with outputs of at least 18W.
- Put the phone into the mount, the charger will automatically absorb the phone and align it with the charging center.
Note
- When the device is connected to the power supply, the blue indicator light will light up. When the phone starts charging, the indicator light will be off. If the phone is removed, the indicator light will light up again.
- The charger has a foreign object-sensing function. When metal or magnetic objects are near the charging pad, the charging will automatically pause. Please remove the relevant items to avoid affecting the wireless charging function.
Important Reminders
- This charger is only compatible with iPhone 15/14/13/12 and later series.
- The maximum output of this charger is 15W. Its maximum output for iPhones is 7.5W.
- Please only use the cable provided with the charger. Other third-party cables may interfere with charging.
- This charger requires a car charger that supports QC3.0 or PD fast charging. It is recommended to use the included car charger.
- For normal charging, please remove the phone case or use a magnetic suction phone case when using it.
Precautions
- Do not place the device in temperatures below 0DC (32DF) or above 60°C (140°F).
- Do not expose it to an open flame, or submerge it in water to avoid damaging the device .
- Do not attempt to disassemble or modify the device in any way, as it may cause serious damage and void the warranty.
- Do not expose the device to extremely hot, humid, or corrosive environments to avoid damaging the device.
- Before charging, please remove all metal or magnetic accessories from the device that may interfere with wireless dlarging. Metal rings, magnetic cards, and credit cards will affect the wireless charging function.
- Keep out of reach of children.
In the Box
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the fllowing two conditions:
- this device may not cause harmful interference, and
- this device must acept any interference received, including interference that may cause undesired operation .
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential insallation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a paricular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>