ITC 69600 Cluster Courtesy Light Installation Guide
- June 3, 2024
- ITC
Table of Contents
Cluster Courtesy Light
Part#: 69600
INSTALLATION INSTRUCTIONS
PARTS NEEDED:
Courtesy
Light
|
Mounting Screws
---|---
Power Drill w/ Hole Saw Bit
|
Butt Splices
Safety Instructions
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Do not install any luminaire assembly closer than 6” from any combustible materials.
- It is recommended that fuse protection be added to the positive (+) input.
- Determine where your LED light fixture will be installed. Once determined, drill a 2” hole using a hole saw.
- Mark location of screw holes and pre-drill. Screw in fixture and snap bezel onto the light.
- Use the wiring diagram below to wire the light to the units power. Test the light.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit
www.itc-us.com/warranty-return-policy
Rev A • 04/07/20
Documents / Resources
| ITC
69600 Cluster Courtesy
Light
[pdf] Installation Guide
69600 Cluster Courtesy Light, 69600, 69600 Light, Cluster Courtesy Light,
Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>