etiampro EDS101B Video Intercom Doorbell User Manual

etiampro EDS101B Video Intercom Doorbell

Product Information

Specifications:

• Model: EDS101S & EDS101B
• Components: Microphone, Indicator, Camera, Loudspeaker, Button 1 & 2 (for EDS101B), Card Reading Area, IR Light, Micro SD Card Slot, Rj-45 Network interface, Terminals
• Interface: RJ45 Network Interface (POE port), RS-485 Interface, Power Supply Input, Grounding POE LAN Network Interface

Product Usage Instructions

1. Introduction
   Important environmental information for EU residents.

2. General Guidelines
   Follow the guidelines provided in the user manual for proper installation and operation.

3.   General Description
   The product includes a microphone, indicator, camera, loudspeaker, buttons, card reading area, IR light, network interfaces, and terminals for various connections.

Operation

1. Before You Start
   Ensure you have read the user manual thoroughly before starting the installation process.

2. Mounting

3. Stick the mounting template on the wall and drill screw holes accordingly.

4. Secure the mounting plate with screws and connect network and signal cables.

5. Secure the device on the mounting plate and fix the cover onto the device.

6. Configuration

   • Startup the device by connecting it to a POE switch or injector and then to the Internet router. Configure the connections for home automation systems and electronic door locks as needed.
   • If connecting to a home automation system, use the provided ports for Door Lock Relay Output (NC/NO), Door Contact, Exit Button, and RS-485 Interface.
   • For electronic door locks, connect to the COM1/NO1 port to remotely open the door using RFID cards or a smartphone app.
   • Advanced configuration can be done through dedicated software for Windows or iOS computers.
   • Visit Velleman’s website for full manual and instructional videos.

Frequently Asked Questions (FAQ)

• Q: How do I reset the device to factory settings?
  A: To reset the device to factory settings, locate the reset button on the device and press it for at least 10 seconds until you see the indicator lights flashing.

• Q: Can I use this product without a POE connection?
  A: Yes, you can power the device using a separate power supply if you do not have a POE connection available.

EDS101S & EDS101B

Product overview

Installation

Surface Mounting without Protective Shield

Surface Mounting with Protective Shield

Terminal and Wiring

USER MANUAL

Introduction
To all residents of the European Union
Important environmental information about this product

• This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
• If in doubt, contact your local waste disposal authorities.
• Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don’t install or use it and contact your dealer.

General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

General Description

Product overview

1. Microphone
2. Indicator
3. Camera
4. Loudspeaker
5. Button 1 & 2 (for EDS101B)
6. Card Reading Area
7. IR Light (night view)
8. Micro SD Card Slot (Reserved) & Debugging Port 9 Rj-45 Network interface (POE port)
9. Terminals

Terminal and Wiring

• NC: Door Lock Relay Output (NC)
• NO: Door Lock Relay Output (NO)
• COM: Common Interface
• AIN1: For the access of Door Contact
• AIN3: For the access of Exit Button
• AIN2 &AIN4: Reserved
• 485-: RS-485 Interface (Reserved)
• 485+: RS-485 Interface (Reserved)
• 12 VDC IN: Power Supply Input (not necessary if using POE via lan connection) GND: Grounding
• POE LAN: Network Interface

Operation

Before You Start

• Make sure all related equipments are power-off during the installation.
• Tools that you need to prepare for installation : Drill (ø2.846) and gradienter.

Mounting

Install the video doorphone according to the installation instructions on page 4.

1. Stick the mounting template on the wall. Drill screw holes according to the mounting template. Remove the template from the wall.
2. Secure the mounting plate on the wall with 4 supplied screws according to the screw holes.
3. Connect the RJ45 network cable and signal cables for connection to a home automation system and/or electronic lock. These outputs have a normal open relay contact. (see page 4).
4. Secure the mounting plate on the wall with 4 supplied screws according to the screw holes.
5. Secure the device on the mounting plate with 4 supplied set screws.
6. Fix the cover onto the device with the screw.

Configuration

• Startup the device:
• Connect the network cable to a POE switch or injector and in turn connect it to the Internet router. After a few minutes, the video doorphone will be automatically connected to the Internet.
• Install the Guarding vision app via smartphone & tablet
• The video doorphone can be easily configured on one smartphone or tablet via the guarding vision software. Install the software on your device, create an account and scan the QR code on the back of the device or on the carton box item sticker.
• The standard user name is admin, the password is “EP”+”serial number with capital letters” (example: EPAE1234567)
• Now you can receive calls on your smartphone or tablet and view images from the camera anywhere in the world.
• If you have connected a cable to the COM2/NO2 port of the signal input of a home automation system, the video intercom will provide a 1-second impulse contact upon releasing the doorbell button.
• This trigger can then be used to activate additional signals in your home, such as sound or light indications.
• Using the COM1/NO1 port, you can connect an electronic door lock (note: this is a regular relay output without voltage). This allows you to remotely open the door using the provided RFID cards or the  smartphone app.

Android-app: Guarding Vision

iOS-app: Guarding Vision

Advanced configuration can be performed through the software for windows or ios computers:

VIEW OUR FULL MANUAL AND INSTRUCTIONAL VIDEOS AT WWW.VELLEMAN.EU
DIRECT LINK VIA QR-CODE:

• RED Declaration of Conformity
• Hereby, Velleman Group nv declares that the radio equipment type EDS101S & EDS101B is in compliance with Directive 2014/53/EU.
• The full text of the EU declaration of conformity is available at the following internet address: www.velleman.eu.
• Frequency power specifications
  • 802.11b: 15 dBm +/- 1.5 dBm
  • 802.11g: 15 dBm +/- 1.5 dBm
  • 802.11n(ht20): 14 dBm +/- 1.5 dBm
  • 802.11n(ht40): 12 dBm +/- 1.5 dBm
• Operating frequency range 2.4-2.4835 GHz
• Network standards IEEE 802.11 b, g, n (2.4 GHz single band)
• Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device.
• For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu.
• The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).
General Warranty Conditions Concerning Consumer Products (for EU):

• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
• Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.
• You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

Not covered by warranty:

• all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;

• consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);

• flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.;

• flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s
  instructions;

  • damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
  • damage resulting from an inappropriate packing and shipping of the article;
  • all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.

• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.

• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.

• Repairs occurring after warranty expiration are subject to shipping costs.

• The above conditions are without prejudice to all commercial warranties.

• The above enumeration is subject to modification according to the article (see article’s manual).

Made in PRC

Documents / Resources

| etiampro EDS101B Video Intercom Doorbell [pdf] User Manual
EDS101B Video Intercom Doorbell, EDS101B, Video Intercom Doorbell, Intercom Doorbell, Doorbell
---|---

References

• Velleman – Wholesaler and developer of electronics
• Velleman – Wholesaler and developer of electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>