Nadoli DSB6122BK 39 Inch Screen Sliding Baththub Installation Guide
- June 1, 2024
- Nadoli
Table of Contents
Nadoli DSB6122BK 39 Inch Screen Sliding Bathtub
Product Specifications
- Model: DSB6122BK / DSB6122GD
- Type: Sliding Bathtub Screen
- Dimensions: 39 inches
- Orientation: LH (Left Hand), RH (Right Hand)
- Material: Metal
- Installation: Requires M4x35 screws
- Glass Thickness: 6mm
Product Usage Instructions
Initial Setup (LH):
- Ensure the factory setting is LH.
- Remove barrel hinges and plate by unscrewing (2.1-2.2).
- Apply silicone if needed.
- Reattach hinges and plate (2.3-2.6).
Switching to HR:
- Rotate the door following these steps:
- Adjust top screws (2.4-2.5).
- Rotate the door as per instructions.
- Adjust bottom screws accordingly (2.6-2.7).
Adjustments:
- Door adjustment range: 0-15mm.
- Overall height adjustment: 125mm.
- Longer screws for increased height, shorter screws for decreased height.
Additional Information:
Refer to the manual provided for detailed diagrams and step-by-step
instructions.
Frequently Asked Questions (FAQ):
-
Q: Can I install this product without professional help?
A: While a skilled DIY individual can install this product, we recommend seeking professional assistance to ensure proper installation and functionality. -
Q: Is the glass tempered for safety?
A: Yes, the glass used in this product is tempered for safety and durability.
Dimension Overview
When reversed to the right side please follow the instruction guide.
- Dimension of shower door: (666~990)mm X 1400mm(H) | (26″~39″) X 55″(H)
- Glass thickness: 6mm
- Profile adjustment: + 1 5mm/9/1 6″
General Information
Please inspect the product immediately upon receipt for transit damage, missing packs/parts or manufacturing faults. Damage reported later cannot be accepted. Please handle the product with care avoiding knocks and shock loading to all sides and edges of the glass.
Notes: Safety glass can not be re-worked
- Please read these instructions carefully before the start of installation.
- Special care should be taken when drilling walls to avoid hidden pipes or electrical cables.
Note:
This product is heavy and may require two people to install.
Aftercare instructions
After use, your shower should be cleaned with soap and water. This is particularly important in hard water districts where insoluble lime salts may be deposited and allowed to build up. Cleaners of a gritty or abrasive nature should not be used. Care should be taken to avoid contact with strong chemicals that can be used but with caution, if in doubt contact the manufacturer of the cleaner in question.
Please keep these instructions for aftercare and customer service details.
Tools Required
This product is heavy and may require two people to install.
Required Parts
Installation Steps
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
LIMITED WARRANTY
- By choosing a NADOLI product, a leader in the plumbing industry, you are sure to make the right choice. On top of the quality materials that are used to make their products, NADOLl’s advanced manufacturing processes also benefit its products’ quality and longevity. To attest to this, they decided to offer their customers a beneficial warranty.
- We certify that our products will meet your needs with their style, but also with their manufacturing quality. To make sure that they are reliable and safe, each product was carefully inspected, tested and approved during the quality control process that is in place.
To whom does this warranty apply?
NADOLI offers a 10-year limited warranty on shower bases and doors from the
date of purchase, exclusive to the first buyer as long as he/she resides in
the same property. The warranty is intended for residential and/or domestic
use.
Care instructions
Clean the product with water and a mild detergent. Abrasive or corrosive
cleaners, steel wool, acetone, dry cleaning products or ammonia compounds must
never be used to clean the product. If a shower mat is used, it must be
removed right after each use. We recommend the use of cleaning products that
are made of acrylic specifically.
What is covered by the warranty?
- From the date of purchase.
Should any manufacturing defects are not covered by the warranty, the product will need to be inspected before following through with the claim. Without that verification, the brand will assume no charge and/or responsibility.
What are the exclusions?
- This warranty is applicable on all NADOLI products purchased on or after January 1st, 2018.
- The warranty doesn’t apply if the product is damaged as a result of misuse, overuse or non-residential use, neglect, lack of maintenance, or the use of corrosive or abrasive products, regardless of the person who did those damages. The warranty does not cover shipping and labour costs. The warranty does not apply to the normal tear and wear of the goods.
- The warranty doesn’t cover the damages caused by the acts of God or breakage resulting from a shock or mishandling, regardless of the part played by the buyer or the installer. It also excludes the damages caused by an improper installation.
- NADOLI doesn’t cover damages caused by a water leak, even if they result directly or indirectly from a product defect, except where the applicable legislation does not allow any exclusion or limitation following indirect or consequential damages.
- It is fair to say that if the product has a manufacturing defect, it will show as soon as it is installed or shortly after. However, a leak caused by an improper installation could happen a long time after. Therefore, it is strongly advised to have it done by a professional.
All warranty claims must include the invoice copy.
Should a part or product component be defective or the finish damaged
following normal domestic and residential use, NADOLI commits to replacing the
defective part(s) to the first buyer only. NADOLI could also, in its sole
discretion, commit to offer a full replacement. No indemnity shall be claimed
for loss of enjoyment of life, loss of income or losses caused by water.