Keyhole Geyer 115 Upright Console and Spinet Vertical Pianos User Manual
- June 1, 2024
- Keyhole
Table of Contents
Keyhole Geyer 115 Upright Console and Spinet Vertical Pianos
Product Overview
The Keyhole Console and Spinet Upright Piano is a musical instrument designed for high performance and aesthetic appeal. It features a sleek black finish with the Keyhole brand logo prominently displayed.
Specifications
| Component | Quantity |
|---|---|
| Main body section | x1 |
| Top | x1 |
| Backboard (Console only) | x1 |
| Keyboard tray (Optional) | x1 |
| Knee panel (Optional) | x1 |
Assembly Instructions
- Begin by unfolding the main body sides out 90 degrees.
- If equipped, install the keyboard tray by resting the rear of the tray in the slots provided and engage the front corners in the rail hardware.
- Place the backboard and top on. The backboard (console model only) slides into the grooves in the sides.
- If equipped, the kneeboard tilts into the catches on the lower center of the sides and is secured by engaging the barrel locks.
- Now’s a good time to run cabling. The last step is installing your keyboard and you’re finished with assembly.
- Disassembly is the reverse of the assembly process.
FAQ
- What are the optional components for the Keyhole Console and Spinet Upright Piano?
- The optional components include a keyboard tray and a knee panel.
- How do I secure the kneeboard if my model is equipped with one?
- The kneeboard tilts into the catches on the lower centre of the sides and is secured by engaging the barrel locks.
- When should I run the cabling for the piano?
- It’s recommended to run cabling after the main assembly is complete but before installing the keyboard.
- Is the disassembly of the piano straightforward?
- Yes, disassembly is simply the reverse of the assembly process.
Packaging contents
Optional components
Assembly Instructions
- Begin by unfolding the main body sides out 90- degrees.
- Install the keyboard tray [IF EQUIPPED] by resting the rear of the tray in the slots provided and engaging the front corners in the rail hardware.
- Place the backboard and top on. The backboard (console model only) slides into the grooves in the sides.
- Engage the barrel locks to secure the kneeboard.
- Now’s a good time to run cabling. The last step is installing your keyboard and you’re finished with assembly. Disassembly is the reverse.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>