Keyhole 60 Turnkey Piano Shell User Manual
- June 10, 2024
- Keyhole
Table of Contents
Keyhole 60 Turnkey Piano Shell
Packaging Content
-
x1 – Main body section
-
x3 – Leg
-
x1 – Lip
-
x1 – Backboard
-
x1 – Top
-
x1 – Lid
-
x2 – Lip Hardware
1/4″-20 x 3/4″ long knob -
x2 – Sled Hardware
1/4″-20 x 2″ long knob -
x6 – Leg Hardware
3/8″-16 x 1.5″ long wing screw -
x2 – Hinge Pin
Assembly Instructions
Begin with the main body of the piano upside down. Attach the legs using the
leg hardware.
Tip the piano right-side up.
Turn the sleds outward into fully open position.
Loosely thread the sled hardware. Do not fully tighten at this step.
This is a good time to attach the pedal lyre – optional (see pedal lyre manual for instructions)
Attach the front lip and use the lip hardware to anchor it in place .
Slide the backboard down into the slot with the logo facing out.
This is the best time to install the keyboard and run wires.
Insert the hinge pins.
Assembly is complete!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>