102-52201 Single Push Button With Led and Comfort Sensors For Niko Home Control Instruction Manual

102-52201 Single Push Button With Led and Comfort Sensors For Niko Home

Control

Product Information

• Specifications
  • Product Name: Single Push Button with LED and Comfort Sensors for Niko Home Control
  • Colour: Light Grey
  • Model Number: 102-52201
  • Features: Easy click-on mechanism, LED indicator, comfort sensors

Product Usage Instructions

• Installation
  • Ensure the power supply is switched off before installation.
  • Remove the existing switch or button from the wall.
  • Connect the wires to the designated terminals on a single push button.
  • Securely mount the single push button onto the wall using appropriate screws.
  • Turn on the power supply and test the functionality of the push button.
• Operation
  • To turn on or off the connected device, simply press the push button once. The LED indicator will provide visual feedback.
• Maintenance
  • Regularly clean the push button using a soft, dry cloth to prevent dust build-up and maintain its appearance.
• Troubleshooting
  • If the push button is not functioning correctly, check the wiring connections and ensure the power supply is stable. Contact customer support if issues persist.

FAQs

• Q: Can I use this push button with other home automation systems?
  • A: The single push button is designed specifically for Niko Home Control and may not be compatible with other systems.
• Q: How do I change the battery in the comfort sensor?
  • A: The comfort sensor does not require a separate battery as it is powered by the main unit.
• Q: Is it possible to adjust the sensitivity of the comfort sensors?
  • A: The sensitivity of the comfort sensors is pre-set and cannot be adjusted manually.

PRODUCT INTRODUCTION

• This single push button can be configured to control a variety of actions and routines in a Niko Home Control II installation on bus wiring.
• It is fitted with a programmable LED that provides (inverted) feedback on the action that is being performed. In addition, the push button can serve as an orientation light when the LED is ON.
• Thanks to its integrated temperature and humidity sensor, the push button also supports multi-zone climate and ventilation control, allowing you to increase your energy efficiency and overall comfort.
• Its multi-purpose temperature sensor can be set to control a heating/cooling zone within a Niko Home Control II installation, as a basic thermometer (Niko Home Control programming software version 2.20) or to create certain conditions (e.g. control sunscreens) (Niko Home Control programming software version 2.19)
• The humidity sensor can also be used within routines (Niko Home Control programming software version 2.20), for example, to perform automatic ventilation control in a bathroom or toilet The single push button features an easy click-on mechanism for wall-mounted bus wiring controls and is available in all Niko finishings.

Technical Data

Single push button with LED and comfort sensors for Niko Home Control, light grey.

• Function
  • Combine the push button’s temperature sensor with a heating or cooling module for multi-zone control or a switching module for electrical heating
  • Combine its integrated humidity sensor with a ventilation module to perform automatic ventilation control
  • Setpoints and week programmes are managed via the app
  • Calibration is managed via the programming software
  • Maximum number of push buttons set as a temperature sensor per installation: 20
  • Temperature sensor range: 0 – 40°C
  • Temperature sensor accuracy: ± 0.5°C
  • Humidity sensor range: 0 – 100 % RH (non-condensing, nor icing)
  • Humidity sensor accuracy: ± 5 %, between 20 – 80 % RH at 25°C
  • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
  • Lens: The key on the push button is fitted at the bottom with a small amber-coloured LED (1.5 x 1.5 mm) to indicate the status of the action.
  • Colour: light grey (coloured in mass, approximately NCS S 1002 – Y, RAL 080 80 05)
• Fire safety
  • the plastic parts of the central plate are self-extinguishing (comply with a filament test of 650 °C)
  • – the plastic parts of the central plate are halogen-free
  • Input voltage: 26 Vdc (SELV, safety extra-low voltage)
  • Dismantling: To dismount simply pull the push button off the wall-mounted printed circuit board.
  • Protection degree: IP20
  • Protection degree: IP40 for the combination of a mechanism and faceplate
  • Impact resistance: After mounting, an impact resistance of IK06 is guaranteed.
  • Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
  • Marking: CE

www.niko.eu.

References

• Niko - home automation, switches, socket outlets and detector

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>