hama 00220864 TV Wall Mount Instruction Manual
- June 1, 2024
- Hama
Table of Contents
hama 00220864 TV Wall Mount
Product Specifications
| Maximum load | 20 kg |
|---|---|
| Screen size diagonal | 48.0 – 122.0 cm (US: 19″ – 48″) |
| Depth | 5.7 cm – 30.0 cm |
| Tilt | -15°/+5° (depending on the device) |
| Pivoting range | Up to 180° (depending on the device) with 3 hinges |
| Wall mounting plate dimensions | 8.0 x 21.8 cm |
| Compatibility according to VESA standard | 75 x 75, 100 x 100, 200 x 100, 200 x |
200
Package Contents
- TV wall bracket
- Mounting kit
- Safety information, illustrated quick start guide
Product Usage Instructions
Mounting Preparation
- Identify the parts according to the manual.
- Position the mounting brackets on the TV backside as instructed.
- Secure the brackets using the provided screws and washers.
Wall Installation
- Locate a suitable wall area for mounting.
- Use a level to ensure the brackets are aligned correctly.
- Drill pilot holes into the wall and insert wall anchors if needed.
- Securely attach the TV brackets to the wall using appropriate screws.
Cable Management
- Organize and secure cables using the cable management system provided.
- Avoid tangling and ensure cables are neatly arranged for a clean setup.
Additional Tools Required
- Drill
- Pencil
- Measuring tape
- Spirit level
- Screwdriver
- Two people for assistance
Installation Steps
- Preparation for Mounting
- Loosen the screws on the side (image a).
- Remove the safety cap from the VESA plate by pushing it back on the wall bracket’s arm (image b).
- Ensure a 3 mm distance is maintained from the screw head to the VESA plate. This distance is required to hang the TV on the wall bracket later on.
- Remove the VESA plate from the wall bracket by lifting it off (image c).
- Mounting on the Wall
- Use the bracket as a template to mark positions on the wall. Ensure correct positioning with a spirit level.
- Drill holes in the wall with a diameter of 8 mm and a depth of 60 mm.
- Insert the A2 plug into the drilled hole so that it is flush with the wall.
- Mounting the TV onto the Bracket
- Ensure the bracket is level and aligned correctly against the TV’s backside.
- Use the provided spacers to adjust the depth as needed for flat or curved TV back panels.
- Attach the VESA plate onto the TV’s backside using the appropriate combination of screws and spacers.
- Hang the TV with the attached VESA plate onto the wall bracket. Ensure the safety cap clicks into place.
- Securing the Safety Cap and Cable Management
- Secure the safety cap on the VESA plate using the provided screw or alternatively with a hanging lock (not included).
- Remove the cable manager from the wall bracket and route the cables along the arm of the bracket.
- Reattach the cable manager by clicking it into place.
Adjustments and Maintenance
- Never adjust the bracket alone. Always have someone to help.
- Be cautious not to pinch or damage cables during mounting and adjustment.
- Make sure the product is loaded symmetrically and does not exceed the maximum weight.
- Regularly check the bracket (at least once per quarter) to ensure it is securely fastened and functions safely.
- Clean only with water or ordinary household cleaning agents.
Adjustment Features
- 180° pivotable
- 57 – 300 mm extendable
- -15°/+5° tiltable
- 6° rotatable
Warranty Disclaimer
Hama GmbH & Co KG disclaims all liability for damages resulting from improper installation, monitoring, and misuse of the product, or if the user manual/safety instructions are not followed.
Service and Support
For questions regarding this product, please contact Hama product advice:
- Hotline: +49 9091 502-0 (German/English)
- More support information at www.hama.com
Warranty Terms
Hama GmbH & Co KG provides an extended manufacturer’s warranty of 10 years from the date of purchase for the end user. The warranty does not cover product compatibility with future hardware nor does it include consumables. Warranty service covers defects occurring under normal conditions and does not include damages due to improper use or force majeure. Accessories not part of the product’s standard equipment are also excluded from warranty claims.
If warranty service is required, please contact Hama GmbH & Co KG with the original proof of purchase. The warranty period begins from the date of purchase. The right to any legal claims you are entitled to is not affected by this warranty. The warranty is valid throughout the EU.
You can also contact us at www.hama.de or by phone at +49 9091/502-0.
Frequently Asked Questions (FAQ)
What is the maximum weight this mount can support?
The mount is designed to support a maximum load of 10 kg.
Can this mount be used with any TV size?
The mount is suitable for flat-screen TVs. Ensure compatibility with your TV size before installation.
How do I ensure the mount is securely installed?
Follow the installation instructions carefully, use all provided hardware, and double-check alignment and stability before mounting the TV.
What should I do if parts of the mounting kit are missing or damaged?
Verify the contents before installation and contact Hama support if any parts are missing or damaged.
Can I install the TV wall bracket on my own?
It is recommended to have another person assist you during the installation process for safety and proper alignment.
How do I make adjustments to the bracket after installation?
You can adjust the pivot, extension, tilt, and rotation of the bracket as per the instructions, but make sure to have assistance and check the bracket regularly for secure attachment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>