Sunco Lighting WP15 LED Slim Wall Pack Light Owner’s Manual

Sunco Lighting WP15 LED Slim Wall Pack Light

Product Information

Specifications

• Product Name: WALL PACK (MWP15)
• Construction: Durable and weather-resistant
• Optics: High-quality optical lens for clear illumination
• Light Distribution and Uniformity: Even light distribution for optimal coverage
• Electrical: Energy-efficient design

Product Usage Instructions

Installation

1. Choose a suitable location on the wall for mounting the WALL PACK.
2. Ensure the wall surface is clean and dry before installation.
3. Securely mount the WALL PACK using the provided screws and mounting hardware.
4. Connect the electrical wiring following the manufacturer’s instructions.

Operation

To turn on the WALL PACK, simply switch on the power source. The light will illuminate the area with its uniform distribution.

Maintenance

Regularly clean the lens and housing of the WALL PACK to ensure optimal performance. Check for any loose screws or connections and tighten them if necessary.

FAQ:

Q: How do I adjust the light distribution of the WALL PACK?

• A: The light distribution of the WALL PACK is pre-set for optimal coverage. It is not adjustable.

Q: Can the WALL PACK be used indoors?

• A: The WALL PACK is designed for outdoor use. Using it indoors may not be suitable for its intended purpose.

DESCRIPTION

• The brand-new WP15 series of LED Wall Pack is available in one size and the power from 11W to 26W, and can replace up to 100W MH.
• Uniform light distribution and excellent LED lumen maintenance rate, high energy efficiency, and low cost, while taking into account the stylish design, ensure that the fixture has a long service life.
• WP15 also has on-site dimmable output, allowing the contractor to set the lumen value of the fixture at the installation site to a level that is perfectly suitable for the work site.
• Emergency egress battery and light control are optional, which is an ideal choice to meet any daily wall-mounted lighting applications.

SPECIFICATION FEATURES

Construction

• Two-piece die-cast aluminum housing secures the thermally conductive LED panel and electrical chamber.
• Casting thermally conducts LED heat to optimize performance and long life.
• Suitable for applications requiring 3G testing prescribed by ANSI C136.31.

Optics

• The 26W is available in standard 4000K and 5000K configurations.
• Scalable Lumen from 1,800 to 3,900 Lumens.
• Anti-UV prismatic translucent lens is designed to shape the light distribution and uniformity

Electrical

• Universal 120-277 VAC input voltage.
• 0-10V Dimming.
• Both drivers have a power factor >90%, THD <20%.
• Operating Temperature Range: -40˚°F – + 104°F.
• Note: Operating with emergency battery temperature range: +50˚°F – + 104˚°F.

Lifespan

• Estimated 50,000-hour LED lifespan based on IES LM-80 results and TM-21 calculations.

Certifications

• UL cUL wet location listed.
• DesignLights Consortium™ Qualified.
• Note: DesignLights Consortium™ Qualified and classified for DLC Standard (all lumen packages), refer to www.designlights.org for details.

Warranty

• Five-year warranty.

Note

• Actual performance may differ as a result of end-user environment and application.
• All values are design or typical values, measured under laboratory conditions at 77°F specifications subject to change without notice.

DIMENSIONS

STRUCTURAL DESIGN

PERFORMANCE DATA ( @ Single CCT )

SYSTEM WATTS| VOLTAGE| CRI| LUMENS (3000K)| LPW| LUMENS (4000K)| LPW| LUMENS (5000K)| LPW
---|---|---|---|---|---|---|---|---
26W| 120-277VAC| 70| 3800lm| 146 lm/W| 3900lm| 150 lm/W| 3900lm| 150 lm/W

ADJUSTABLE LUMEN OUTPUT TABLE

ELECTRICAL DATA

Number of Drivers| Driver Current (mA)| Nominal Power (W)| Input Voltage (V)| Current (Amps)
---|---|---|---|---
1| 430| 26| 120| 0.22
26| 208| 0.13
26| 240| 0.11
26| 277| 0.09

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>