Gweike CO2 Cloud Basic II 50W Laser Cutter Engraver Instruction Manual
- June 1, 2024
- Gweike
Table of Contents
Quick Instructions Operating System
CO2 Cloud Basic II 50W Laser Cutter Engraver
Must ensure:
- The emergency stop button needs to be rotated out.
- Plug in the remote inter locking aviation plug on the back of the machine.
Register and Login
-
Please use a computer or tablet PC click to https://www.gweikecloud.com/cloud We recommend using Google Chrome.
-
Click the “Create one now”. Register an operating account on the cloud laser Website.
Note: If account already registered when make payment, please use it and please don’t register again. -
After register your account successfully,click the to https://www.gweikecloud.com/cloud, Login in your account, Enter your account and password.
Add Device
Input your machine ID, the machine ID is on the lable on the back of the machine. When shows “GWEIKE CLOUD added successfully”, pls click “Next”.
WIFI Connection
1. Confirm The Wifi Environment
- Machine and WiFi, distance must be within 3 meters, and no wall between them.
- Wifi should be 2.4GHz, 5G not.
- If the network is unstable, please add a WIFI singal booster.
2. Press and hold the button on the device for5s, The color of the button
will change from purple to red, back and forth. And then click “Next”.
NOTICE:
If the button is not on after long press, please restart the machine, wait
until the button light is off after the machine reset, and press the button
again for 5S to see whether the button light is on. If it is on, please go to
the next step. If it is not on, please contact after-sales service.
Please contact the after sale service if the door and drawer close while the
LED doesn’t light.
3. Please turn on the Wifi of the computer to search for the device Wifi,
the device Wifi is named in the form of gweikeXXX, and connect to this Wifi.
Notice If you cannot find the Wifi named in the form of gweikeXXX, please
turn off the computer’s Wifi first, and then turn on the computer Wifi, repeat
several times, when the Wifi shows that the connection is successful, proceed
to the next step. 4. Enter the URL http://192.168.20.1:8080/ in the
browser, click refresh
WIFI account is being used at home, pay attention to case.
WIFI passwordpay attention to case.
Choose your country. Notice
I. Connect successfully does not represent that the WIFI connect
successfully , and the off of button light of the machine automatically
indicates that the WIFI connection is successful.
II. Enter the account password of the home WIFI(please ensure that the
account password is correct, the network needs to be above 100M, and the
network speed is better) Click , if the button light of the machine is off, it
means that the WIFI connectionis successful.
III. If the button light is not off, please check the following:
- Check whether the WIFI name and password are correct, case sensitivity, and make sure no special symbols (,. / ; ? ,etc)
- Click “Connect”, if the button light of the machine does not light up, it means that the WIFI connection is successful. If the button is off, the connection failed
- If you fail to configure WIFI when connecting to the cloud for the first time, the button does not turn off as expected, please follow the previous steps again until you reach this page again, click Reset here, and refresh the current web page, enter the WIFI name and password as required, select the country, and try to connect.
Let the computer connect to the WIFI of your home router