BOURNS 1200-BB-3P Bus Bar Accessory Instruction Manual
- June 12, 2024
- BOURNS
Table of Contents
1200-BB Series Bus Bar Accessory Instruction Manual
1200-BB-3P Bus Bar Accessory
Features
- Two, three and four-point configurations
- Quick connect design
- Easy installation
- Versatile configurations
Applications
- Bourns® Model 1210 and 1250 AC Surge Protective Devices (SPDs)
General Information
The Bourns® Model 1200-BB Series bus bar accessory provides a quick solution for combining the ground connection on two to four Model 1210 or 1250 Series SPDs. The bus bar is installed at the bottom of the SPD, providing a bridge that connects the individual ground points. After installation of the bus bar, a single ground wire can then be used to complete the installation, saving wiring time.
| Bus Bar Part Number | Configuration | Common Grounding Point | Notes |
|---|---|---|---|
| P2-BB-0021 | The model 1200-BB-2P allows for two single – pole devices to |
share one common grounding point.
1200-BB-3P| | | The Model 1200-BB-3P allows for three single-pole devices to
share one common grounding point.
1200-BB-4P| | | The Model 1200-BB-4P allows for four single-pole devices to
share one common grounding point.
Asia-Pacific: Tel: +886-2 2562-4117 • Email:
asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email:
eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email:
americus@bourns.com
www.bourns.com
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific
disclaimers as set forth on the last page of this document, and at
www.bourns.com/legal/disclaimer.pdf.
Product Dimensions
REV. 10/19
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal
disclaimers as set forth on the last page of this document, and at
www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products
manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively,
“Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data
sheets relating thereto are subject to change without notice. Users should
check for and obtain the latest relevant information and verify that such
information is current and complete before placing orders for Bourns®
products.
The characteristics and parameters of a Bourns® product set forth in its data
sheet are based on laboratory conditions, and statements regarding the
suitability of products for certain types of applications are based on Bourns’
knowledge of typical requirements in generic applications. The characteristics
and parameters of a Bourns® product in a user application may vary from the
data sheet characteristics and parameters due to (i) the combination of the
Bourns® product with other components in the user’s application, or (ii) the
environment of the user application itself. The characteristics and parameters
of a Bourns® product also can and do vary in different applications and actual
performance may vary over time. Users should always verify the actual
performance of the Bourns® product in their specific devices and applications,
and make their own independent judgments regarding the amount of additional
test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as
meeting the requirements of a particular industry standard (e.g., ISO/TS
16949) or a particular qualification (e.g., UL listed or recognized), Bourns
is not responsible for any failure of an individual Bourns® product to meet
the requirements of such industry standard or particular qualification. Users
of Bourns® products are responsible for ensuring compliance with safety-
related requirements and standards applicable to their devices or
applications.
Bourns® products are not recommended, authorized or intended for use in
nuclear, lifesaving, life-critical or life-sustaining applications, nor in any
other applications where failure or malfunction may result in personal injury,
death, or severe property or environmental damage. Unless expressly and
specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized
applications might not be safe and thus is at the user’s sole risk. Life-
critical applications include devices identified by the U.S. Food and Drug
Administration as Class III devices and generally equivalent classifications
outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable
for use in automotive applications on such products’ data sheets in the
section entitled “Applications.” Unless expressly and specifically approved in
writing by two authorized Bourns representatives on a case-by-case basis, use
of any other Bourns® standard products in an automotive application might not
be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk. If Bourns expressly identifies a sub-category of automotive
application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard
product and has determined that if such Bourns® standard product is considered
for potential use in automotive applications, it should only be used in such
sub-category of automotive applications. Any reference to Bourns® standard
product in the data sheet as compliant with the AEC-Q standard or “automotive
grade” does not by itself mean that Bourns has approved such product for use
in an automotive application.
Bourns® standard products are not tested to comply with United States Federal
Aviation Administration standards generally or any other generally equivalent
governmental organization standard applicable to products designed or
manufactured for use in aircraft or space applications. Bourns expressly
identifies Bourns® standard products that are suitable for use in aircraft or
space applications on such products’ data sheets in the section entitled
“Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other
Bourns® standard product in an aircraft or space application might not be safe
and thus is not recommended, authorized or intended and is at the user’s sole
risk.
Bourns® standard products are not tested to comply with United States Federal
Aviation Administration standards generally or any other generally equivalent
governmental organization standard applicable to products designed or
manufactured for use in aircraft or space applications. Bourns expressly
identifies Bourns® standard products that are suitable for use in aircraft or
space applications on such products’ data sheets in the section entitled
“Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other
Bourns® standard product in an aircraft or space application might not be safe
and thus is not recommended, authorized or intended and is at the user’s sole
risk.
The use and level of testing applicable to Bourns® custom products shall be
negotiated on a case-by-case basis by Bourns and the user for which such
Bourns® custom products are specially designed. Absent a written agreement
between Bourns and the user regarding the use and level of such testing, the
above provisions applicable to Bourns® standard products shall also apply to
such Bourns® custom products. Users shall not sell, transfer, export or re-
export any Bourns® products or technology for use in activities which involve
the design, development, production, use or stockpiling of nuclear, chemical
or biological weapons or missiles, nor shall they use Bourns® products or
technology in any facility which engages in activities relating to such
devices. The foregoing restrictions apply to all uses and applications that
violate national or international prohibitions, including embargos or
international regulations. Further, Bourns® products and Bourns technology and
technical data may not under any circumstance be exported or re-exported to
countries subject to international sanctions or embargoes. Bourns® products
may not, without prior authorization from Bourns and/or the U.S. Government,
be resold, transferred, or re-exported to any party not eligible to receive
U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any
and all liability for special, punitive, consequential, incidental or indirect
damages or lost revenues or lost profits, and (ii) any and all implied
warranties, including implied warranties of fitness for particular purpose,
non-infringement and merchantability. For your convenience, copies of this
Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese
and Simplified Chinese bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
Downloaded from Arrow.com.
C1753 05/17/18R
Documents / Resources
|
BOURNS 1200-BB-3P Bus Bar
Accessory
[pdf] Instruction Manual
1200-BB-3P Bus Bar Accessory, 1200-BB-3P, Bus Bar Accessory, Bar Accessory,
Accessory
---|---