hama 00176647 Surveillance Smart Camera Instruction Manual

hama 00176647 Surveillance Smart Camera

Product Information

Specifications

• Model: Smart Camera 00176647
• Connectivity: USB-C
• Features: Status LED, Microphone, SD card slot, Loudspeaker, Reset button
• Package Contents: 1x Smart Camera, 1x USB-C cable, 1x Mounting kit, 1x Quick guide, 1x Warning and safety instructions

FAQ

• Q: How do I reset the Smart Camera?
  • A: To reset the camera, remove the rubber protector on one side and press the reset button with a needle until a signal sound is heard.
  • When the LED flashes red, you can proceed with pairing.

Introduction

Thank you for choosing a Hama product.

Take your time and read the following instructions and information completely.
Please keep these operating instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

Risk of electric shock

• This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning

• This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

• This symbol is used to indicate additional information or important notes.

Explanation of symbols used on the product label

• The product is intended only for indoor use.

Packaging Contents

• 1x smart camera
• 1x USB-C cable
• 1x mounting kit
• 1x quick guide
• 1x warning and safety instructions

Safety Instructions

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
• This product is intended for private, non-commercial use only.
• Use the product for its intended purpose only.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
• Do not use the product in areas where the use of electronic devices is not permitted.
• Do not drop the product and do not expose it to any major shocks.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not operate the product outside the power limits given in the specifications.
• Use the item only in moderate climatic conditions.
• Do not mount the product above locations where persons might linger.
• Before mounting, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
• Pay attention to the applicable data protection regulations before installing and using the product.
• Respect the personal and property rights of others. Do not make recordings of other people with the Camera.
• Observe the right to one’s own image and spoken word when recording.
• Keep this product, as all electrical products, out of the reach of children!
• The product is intended for indoor use only.
• Do not bend or crush the cable.
• Do not use the product in moist environments and avoid splashes.

Installing the Hama Smart Home app

To use all the functions of the device, you need a smartphone/tablet and the Hama Smart Home app.

Note

• The following operating systems are supported:
• iOS 16.3 or later
• Android 6.0 or later
• Download the Hama Smart Home app from the App Store (iOS) or from Google Play (Android) to your smartphone/tablet.
• To install the app, follow the instructions on your smartphone/tablet.
• Open the app on your smartphone/tablet.

Note

https://link.hama.com/app/smart-home

• While setting up the app, you will be asked whether the app has permission to access the functions of your smartphone/tablet. Say yes to these prompts for the full functionality of the device.
• Register to create a new account. Alternatively, log in with the access data of your existing account.
• Follow the instructions for setting up the app until you can add a new device.

Note

• A detailed description of the Hama Smart Home app and all of its functions can be found in our app guide at: www.hama.com →article number→Downloads→App operating instructions
• Ensure that you are using the latest version of the Hama Smart Home app.

Product Properties And Installation

Product Properties

The following steps are required to commission the device:

• Connect the device to a properly installed and easily accessible mains socket.
• Put the device in pairing mode by holding the button for around 5 seconds. The LED starts to flash quickly.

Installation

• You can secure the camera into place using the adhesive pads or mounting kit supplied.

Warning:  installation with adhesive

• Be aware that the intended mounting surface must be free from dust and grease. Use a suitable cleaner from a specialist retailer for this.
• Be aware that the adhesive pads are intended to be permanent. Carefully pull the adhesive pad off the mounting surface to remove it.
• Various environmental influences, such as moisture in the air, sunlight, cold, etc., can impair the long-term stickiness of the adhesive pads.
• Possible residue on the mounting surface after removal of the adhesive pads cannot be ruled out!

Warning:  mounting kit

• Do not mount the product above locations where persons might sit or stand.
• Before mounting, check that the wall you have chosen is suitable for the weight to be mounted.
• Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.

Integrating devices into the Hama Smart Home

Warning

• Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
• If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the socket strip’s maximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains power.
• Connect the camera to a suitable power supply unit and a properly installed socket.
• The LED on the camera starts to flash quickly. If it does not, press and hold the Reset button (4) on the camera for around 5 seconds.
• Open the app and sign in.
• Press the + in the top right-hand corner to add a new device.
• Choose Cameras from the list.
• Now confirm that the camera’s LED is flashing quickly by ticking “Next step” and clicking on “Next”.
• Ensure that the QR code is at the top right.
• Next enter your WiFi password and confirm with NEXT.
• Now scan the QR code with the camera from a distance of around 15 – 20 cm.
• As soon as you hear a signal sound, click “Signal sound heard”.
• Your camera is now connected.
• Once the connection is successful, the LED stops flashing quickly and the app confirms that your camera is connected. You can now assign it a different name if you wish.
• Click Finish to end the process.
• You can now operate and configure the camera.

Note

A detailed description of the Hama Smart Home app and its full scope of functions can be found in our App Guide at:

• www.hama.com → Article Number →Downloads →App Operating Instructions

Setting Options

The following settings can be made in the app:

2

| Open the photo album and view all of the images captured.
3| Switch between dark and light mode.
4| Switch the camera off.

5

| When it gets dark, the camera automatically switches to infrared / night vision mode.

6

| Activate / deactivate movement tracking on the

camera.

7| Activate / deactivate motion detection.
8| Activate / deactivate sound recognition.
9| Retrieve this device’s messages and alarms.
10| Control or swivel function on the camera.
11| Call up the data from your cloud storage here.

12

| Recording Quality HD (High Definition: 1.280 x 1.080) or SD (Standard Definition: 720 x 576)

For extended usage options, scenarios can be created in the app.
(See Section 9 and App Guide)

Extended usage options with scenarios

Scenarios and automated sequences that can be created in the app allow various combination options and usage options for these products, depending on the SmartHome products in your home. Programming is always via the app (see Section 4 of the App Guide) and will be offered / suggested to you on an individual basis.

Standard usage option

Technical Data

Specifications according to Regulation (EU) 2019/1782

Specifications according to Regulation (Eu) 2019/1782

Brand name, commercial register number, address| Hama, HRA12159, Dresdner Str. 9, 86653 Monheim, Germany
Model identifier| DCT07W050100EU-C1
Input voltage| 100-240 V
Input AC frequency| 50/60 Hz
Output voltage / output current / output power| ****

5.0 V DC / 1.0 A / 5.0 W

Average

efficiency during operation

| 73.6%
Efficiency at low load (10%)| 66.6%
Power consumption at zero load| 0.10W

Care And Maintenance

Note

• Disconnect the device from the mains before cleaning and during prolonged periods of non-use.
• Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning products.
• Ensure that no water is able to enter the product.

Warranty, Service And Support

Warranty Disclaimer

• Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the use instructions and/or safety notes.

Service and support

• Please contact Hama Product Consulting if you have any questions about this product.
• Hotline: +49 9091 502-0 (German/English)
• Further support information can be found here: www.hama.com

To limit exposure to electromagnetic fields

• This device is intended for use at a distance of at least 20 cm from the body of the user or persons nearby.
• This device must not be worn or carried on the body.

Declaration Of Conformity

• Hama GmbH & Co KG hereby declares that the radio equipment type [00176647] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: https://uk.hama.com → →00176647 →Downloads

Hama GmbH & Co KG

• 86652 Monheim / Germany

Service & Support

• www.hama.com
• +49 9091 502-0

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co. KG is under license. Other trademarks and trade names are those of their respective owners.
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

• hama.com
• Offizieller Hama Onlineshop | Hama DE
• Startseite hama.com
• Home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>