ELLA A02 TV Stand Instruction Manual
- June 1, 2024
- ella
Table of Contents
ELLA A02 TV Stand
Introduction
Valued Customer, We design and
carefully manufacture our products for our customers, We wish that our
customers to have fun while they are doing their new furniture The product you
just purchased was subjected to all sorts of tests and controls before sending
out to you.
Hope you enjoy your new furniture!!!
Furniture parts are going to several manufacturing procedures. During this
process, parts can have little dust or marks. Please clean the parts with dump
cloth before assembly to get the best result. Usual cleaning would be suffice.
Do not use your furniture for out of purposes.
If you would like to use it out of purpose or would like to do some
modification or rotation, please contact us for more details.
Please do not expose your furniture with excessive heat, cold and humidity
because product can be affected negatively.
manufactured and packed,
sometimes we experience damage during transportation. lunch cases, please
check the damaged part, note the part number written on the part and do not
hesitate to contact us Mail:
[email protected]
Before starting, please check all components and accessories according to the
provided list. If you purchased more than one product, to prevent confusion,
be sure that you completed the first product, the start the next one. Please
make sure that you select correct numbered part and use specific connector to
assemble. We do not recommend any modification or rotation in assembly. Please
follow the manual carefully.
Tools Required
Safety Precautions
How to install Components
-
MINIFIX HEAD
-
MINIFIX SCREW
-
DOWEL
If the dowel is not required during the installation phase, it is not included in the package.
Please notice that there is an small arrow on A03 (mini fix head}.This arrow should show the direction of upper hole.
After attaching two pieces please turn the A03 (mini fix head) clockwise direction with the help of a screwdriver.
*Please do not over screw the mini fix head since it may be broken if too much power is imposed. Just make sure that it is screwed to the direction”+” do not go any further.
Accessory List
General View
Assembly Instructions
CUSTOMER SUPPORT
Please contact us about any product related issue. We are honored to support
you.
[email protected]