GOPPER RV Awning Shade Screen User Manual
- June 1, 2024
- GOPPER
Table of Contents
User Manual-Gopper RV Awning
Introduction
Thank you for choosing Gopper RVAwning Sunshade Screen!
This user manual aims to provide clear and simple instructions for setting up
and securing your RV Awning. Please read the following steps carefully before
proceeding.
Unpacking andUnfolding
Step 1: Open the black carry bag and ensure that all the contents are
included.
The package should contain the following items:
- RVAwning Sunshade Screen
- Carry bag
- Awning Stakes
- Bungee cords
Step 2: Check the contents to ensure everything is complete.
Step 3: Unfold the RVAwning Sunshade Screen. Take care not to force or tug on
the fabric. Gently extend it to its full length.
Installing the RVAwning
Step 1: Open the awning so that the open slot access is exposed below the
awning arm.
Step 2: Slide the Poly-cord into the awning slot. Move it along the slot until
it is securely in place.
Step3: To prevent the awning from blowing up in the
wind, use the supplied stakes and bungee cords. Insert the stakes into the
ground at suitable points along the base of the sunshade. Attach the bungee
cords to the awning and secure them to the stakes. Make sure the cords are
taut but not overly stretched.
Maintenance and Care
- Avoid placing excessive weight on the RV awning.
- Regularly inspect and remove any debris or leaves that may accumulate on the fabric to maintain its longevity.
- Do not leave the RV awing installed during heavy rain or extreme weather conditions, as it may become damaged.
We hope this user manual has provided you with the necessary instructions to set up and secure your RV Awning! Enjoy your outdoor adventures with Gopper RV Awning!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>