LANTIME Cordless Roman Shades for Windows Installation Guide
- June 1, 2024
- LANTIME
Table of Contents
LANTIME Cordless Roman Shades for Windows
Product Information
- Roman Shade Installation Guide
- Dear Customer:
- Thank you for purchasing our product. We want to reassure you that our main design focus with window blinds/shades is child safety, and we guarantee this with our new Cordless Roman Shade.
- In addition, we hope that you enjoy its ease of use and installation. We look forward to your continued patronage in the future.
- Tools Needed for Installation
- Metal measuring tape
- Pencil
- Phillips screwdrivers
- Step ladder or stool
- Drill & bits (1/8″)
- Level
Specifications
| Hardware contents | Quantity |
|---|---|
| Bracket (A1) | 2 |
| Mounting Screw (A3) | 4 |
| Wall Anchor (A4) | 4 |
Product and Using Instruction
- Step 1. Installing the brackets
- Inside mount
- Pencil mark the mounting screw holes at the top of the bracket.
- Drill holes at the pencil-marked locations.
- Position the brackets near each end of the headrail.
- Secure the brackets with the mounting screws provided.
- Outside mount
- Pencil mark the mounting screw holes at the back of the bracket.
- Drill holes at the pencil-marked locations.
- Use level to align brackets to ensure straight alignment. The shade needs to be level for proper operation.
- Secure the brackets with the mounting screws provided.
- When mounting brackets on a wallboard or plaster, use the wall anchors provided.
- Step 2. Installing the shade
- Insert the flange of the top rail into the top of the bracket as shown in the drawing then snap in the rear part of the rail onto the tab of the bracket in a twisting motion.
- Note: Avoid placing brackets over the spring box or cord pulley. When installing brackets make sure the brackets do not catch the shade cord(s) against the headrail.
- Step 3. Operating the shade
- To lower shade
- Lowering shade: Simply grasp the centre of the bottom rail pull the shade down to the desired length and release.
- To raise shade
- Raising shade: Simply grasp the centre of the bottom rail push it upward to the desired length and release.
- Cleaning your shade
- For best results, we suggest using a vacuum cleaner or dry cloth to remove dust. For spot-removal try using a light damp cloth to wipe the spot clean. Do not use any kind of chemical to clean the shade as it may damage the shade.
- Patent No: US 8,291,959 B2 & Other Patents Pending
- Made in Vietnam.
FAQs
- Q: Can I install the Roman Shade myself?
- A: Yes, the guide provides step-by-step instructions for self-installation, but ensure you have all the necessary tools.
- Q: What should I do if the shade is not level after installation?
- A: Check to ensure the brackets are aligned using a level during installation. Re-adjust if necessary to achieve proper alignment.
- Q: How do I clean the shade if it gets dirty?
- A: Use a vacuum cleaner or dry cloth to remove dust. For spots, try a lightly dampened cloth. Avoid using chemicals as they may damage the shade.
If you have any questions regarding this product or the instructions please call Achim’s Family of Home Furnishing Customer Service at 1-800-54-ACHIM. Visit our website at www.achimonline.com.
Dear Customer: Thank you for purchasing our product. We want to reassure you that our main design focus with window blinds/shades is child safety, and we guarantee this with your new, Cordless Roman Shade. In addition, we hope that you enjoy its ease of use and installation. We look forward to your continued patronage in the future.
Tools needed for installation
- Metal measuring tape
- Pencil
- Phillips screwdrivers
- Step ladder or stool
- Drill & bits (1/8 “)
- Level
Hardware contents
- (A1) × 2 bracket
- (A3) x 4 mounting Screw (1-1/8″)
- (A4) × 4 wall Anchor
INSTALLATION STEPS
- step 1. Installing the brackets
- inside mount
- Pencil mark the mounting screw holes at the top of the bracket.
- Drill holes at the pencil-marked locations.
- Position the brackets near each end of the headrail. ****
- Secure the brackets with the mounting screws provided.
- outside mount
- Pencil mark the mounting screw holes at the back of the bracket.
- Drill holes at the pencil-marked locations.
- Use the level at the top of the brackets to ensure straight alignment. The shade needs to be level for proper operation. ****
- Secure the brackets with the mounting screws provided.
- When mounting brackets on a wallboard or plaster, use the wall anchors provided.
- step 2. Installing the shade
- Insert the flange of the top rail onto the top of the bracket as shown in the drawing then snap in the rear part of the rail onto the tab of the bracket in a twisting motion.
- Note:
- Avoid placing brackets over the spring box or cord pulleys.
- When installing brackets make sure the brackets do not catch the shade cord(s) against the headrail.
- step 3. Operating the shade
- Lowering shade: Simply grasp the centre of the bottom rail pull the shade down to the desired length and release.
- Raising shade: Simply grasp the centre of the bottom rail push it upward to the desired length and release.
- Raising shade: Simply grasp the centre of the bottom rail push it upward to the desired length and release.
cleaning your shade:
- For best results, we suggest using a vacuum cleaner or dry cloth to remove dust.
- For spot-removal try using a light damp cloth to wipe the spot clean. Do not use any kind of chemical to clean the shade as it may damage the shade.
- Patent No.: US 8,291,959 B2 & Other Patents Pending Made in Vietnam.
CONTACT
- We hope you enjoy your new purchase!
- If you have any questions regarding this product or the instructions
- Please call Achim’s Family of Home Furnishings
- Customer Service at 1-800-54-ACHIM
- Visit our website at www.achimonline.com.
- Made in Vietnam
- V-30
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>