Magic Leap ML2 Shed Light User Guide

Magic Leap ML2 Shed Light

What’s in the Box

Your Magic Leap 2 for Enterprise box contains:

• Headset
• Compute Pack
• Controller
• Enterprise Charger – 2 x 45W USB-C charger and cables for Compute Pack and Controller
• Fit Kit for Headset. A set of nose pads and forehead pads to customize the fit
• Optional Overhead Strap to support in-motion use and slippage
• Frame with eye cups
• Shoulder strap for crossbody wearing
• Controller lanyard to attach to users wrist
• Carry Case and Cleaning Cloth, robust case to carry Headset, Compute Pack and Controller

Attach Your Compute Pack to a Pocket…
Slide the Compute Pack onto a pocket until it moves past the clip. Please don’t put the Compute Pack in a pouch or pocket while in use or block the vents.

… Or to the Shoulder Strap
Clip the carabiners on the Shoulder Strap to the corresponding fasteners on the Compute Pack. Get comfortable by adjusting the length.

Put on your Headset
Gently stretch the back of your Headset headband until it comfortably fits over your head. For the best comfort and visual experience, rest the Headset around the widest part of your head. If necessary, insert required pads and nosepiece from the included Fit Kit for an individualized comfortable fit for you.

The Headset adjusts to the width of your head by gently stretching the temples of the device.

Prevent Tangling the Cords
Be sure to prevent the cord from getting tangled or wrapped around the headband.

Wear Glasses?
Pull the magnetic frame away from the Headset and replace it with the Prescription Insert. Order yours at Rochester Optical’s FrameofChoice.com.

Turn On Your Magic Leap
Press the button on the front of the Compute Pack and wait until the lights are fully illuminated.

Identifying Buttons and Controls
Review the corresponding illustrations to become familiar with the buttons and controls of your new Magic Leap 2.

Set Up Your Device

Your device needs to be set up before you can use it.

1. Your Controller should be connected to your device from the factory. If it isn’t already connected, pair your Controller to the Compute Pack using the USB-C to USB-C cable. You can then follow the prompts in your device.
2. Connect to WiFi using the Settings app.
3. Click on Network and internet.
4. Click on Wi-Fi.
5. Scroll through the list of WiFi using the touchpad and choose your preferred network.
6. For secure networks, a virtual keyboard will popup: Enter your password using the Controller.
7. Click “connect” on the WiFi screen.

Charge, Clean, and Store Safely

Charge
For the best experience, make sure the device is fully charged every time you use it.

Clean
Make sure the device is turned off while cleaning. Remove the Forehead Pad, Nose Pad, and Lens Insert. Use a damp, but not wet, isopropyl alcohol wipe or sterile, lint-free cloth to gently clean the Headset, Compute Pack, and Controller. Use a damp, sterile, lint-free cloth to rinse and a dry one to finish.

Store
Safely store the device in the Carry Case or box provided. Always keep it out of direct sunlight to avoid damage. For the full safety instructions, see the Safety Guide.

Keep up to date
We may update this guide from time to time. For the latest version, please visit magicleap.com/start

Documents / Resources

| Magic Leap ML2 Shed Light [pdf] User Guide
ML2M1, 2AM5N-ML2M1, 2AM5NML2M1, ML2 Shed Light, ML2, Shed Light, Light
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>