TOSHIBA UA3A Series Television User Guide
- June 3, 2024
- Toshiba
Table of Contents
- TOSHIBA UA3A Series Television
- Inserting the batteries into the remote
- Connections
- Switching on the TV
- Internet connection
- Remote control
- Initial setup wizard
- Accessing the full user manual
- Feature Overview
- High Dynamic Range (HDR) / Hybrid Log-Gamma (HLG)
- Safety Information
- Markings on the Product
- Licenses
- Disposal
- REACH information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TOSHIBA UA3A Series Television
Inserting the batteries into the remote
Remove the screw that secures the battery compartment cover on the back side of the remote control first. Lift the cover gently. Insert two 1.5V – size AAA batteries. Make sure the (+) and (-) signs match (observe correct polarity). Do not mix old and new batteries. Replace only with the same or equivalent type. Place the cover back on. Then screw the cover back on again.
Connections
Antenna
Connect the antenna cable/s to your TV.
External Devices
PLEASE ENSURE BOTH UNITS ARE SWITCHED OFF BEFORE CONNECTING Use the proper
cable to connect two units together. To select the desired input source, press
the Source button on the remote control.
HDMI connection
Power
After unpacking, allow the TV set to reach the ambient room temperature before
you connect the set to the mains. Plug the power cable to the mains socket
outlet. IMPORTANT: The TV set is designed to operate on a 220-240V AC, 50
Hz supply.
Switching on the TV
In order to turn the TV on from standby mode:
- Press the Standby button on the remote control
- Press the control button on the TV
Internet connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection. Refer to full user manual for detailed instructions.
Wired
Wireless
Note: The figures are for representation only
Remote control
- Standby
- Numeric buttons
- Language
- Home
- Mute
- Volume +/-
- Guide
- Directional buttons
- OK
- Back/Return
- Netflix
- Menu
- Stop 14. Rewind
- Record
- Coloured Buttons
- Text
- Pause/Play
- Fast forward
- MyButton1
- YouTube
- Exit
- Info
- Source
- Programme +/-
- Subtitles
Initial setup wizard
When turned on for the first time, a welcome screen will be displayed. Select your language and press OK. Follow the on screen instructions to setup your TV and install channels. The installation wizard will guide you through the setup process. You can perform initial setup anytime using the Reset option in the Settings>Device Preferences menu. You can access the Settings menu from the Home Screen or from the TV options menu in Live TV mode. After starting the initial setup wizard a search for accessories will be performed. Follow the on-screen instructions to pair your remote control (depends on the model of the remote control) and other wireless accessories with your TV. For more detailed information on pairing your remote, refer to the full user manual.
Accessing the full user manual
You can review your TV’s full user manual online or download as you like. Scan this QR code or visit https://toshiba-tv.com
Accessories Included
- Remote Control
- Batteries: 2 x AAA
- Quick Start Guide
- Product Fiche
- P-clip x2
Feature Overview
- Multi-Media Player Browse the media content stored on USB devices that are connected to your TV or on mobile devices that are connected to the same network as your TV using the MMP app
- Common Interface Decode encrypted digital TV channels with a Conditional Access Module(CAM) and a card provided by a digital TV service operator
- USB Recording Record your favourite TV programmes
- Electronic Programme Guide Display the scheduled digital TV programmes
- CEC Control basic functions of the connected HDMI-CEC compatible audio/video devices with the remote control of the TV
- HbbTV Access to HbbTV services (services are dependant on broadcast)
- Apps Access the applications installed on your TV, add more from the market
- Google Cast With the built-in Google Cast technology you can cast the content from your mobile device straight to your TV.
- Bluetooth® Connect audio devices or remote controller wirelessly to your TV.
Some features may not be available dependant on your TV model, please check the product fiche for your product specifications For more detailed information on installation, function and control refer to the full manual on our website at: http://www.toshiba-tv.com
High Dynamic Range (HDR) / Hybrid Log-Gamma (HLG)
Using this feature the TV can reproduce greater dynamic range of luminosity by capturing and then combining several different exposures. HDR/HLG promises better picture quality thanks to brighter, more realistic highlights, more realistic colour and other improvements. It delivers the look that filmmakers intended to achieve, showing the hidden areas of dark shadows and sunlight with full clarity, colour and detail. HDR/HLG contents are supported via native and market applications, HDMI, USB inputs and over DVB-S broadcasts. When the input source is set to the related HDMI input press the Menu button and set the HDMI EDID Version option in the TV Options>Settings>Device Preferences>Inputs menu as EDID 2.0 or Auto EDID in order to watch HDR/HLG content, if the HDR/HLG content is received through an HDMI input. The source device should also be at least HDMI 2.0a compatible in this case.
Dolby Vision
Dolby VisionTM delivers a dramatic visual experience, astonishing brightness,
exceptional contrast, and vivid colour, that brings entertainment to life. It
achieves this stunning image quality by combining HDR and wide colour gamut
imaging technologies. By increasing the brightness of the original signal and
using a higher dynamic colour and contrast range, Dolby Vision presents
amazing true-to-life images with stunning detail that other post-processing
technologies in the TV aren’t able to produce. Dolby Vision is supported via
native and market applications, HDMI and USB inputs. When the input source is
set to the related HDMI input press the Menu button and set the HDMI EDID
Version option in the TV Options>Settings>Device Preferences>Inputs menu as
EDID 2.0 or Auto EDID in order to watch HDR/HLG content, if the HDR/HLG
content is received through an HDMI input. The source device should also be at
least HDMI 2.0a compatible in this case. In the Picture Mode menu two
predefined picture modes will be available if Dolby Vision content is
detected: Dolby Vision Bright and Dolby Vision Dark. Both allow the user to
experience the content in the way the creator originally intended with
different ambient lighting conditions. To change the Picture Mode setting
press the Menu button while watching the Dolby Vision content and go to
Picture menu. While watching Dolby Vision Content via an application, except
YouTube, Netflix and Multi Media Player, you will not be able to access the
Picture menu and set the Picture Mode.
Safety Information
In extreme weather (storms, lightning) and long inactivity periods (going on
holiday) disconnect the TV set from the mains.
The mains plug is used to disconnect TV set from the mains and therefore it
must remain readily operable. If the TV set is not disconnected electrically
from the mains, the device will still draw power for all situations even if
the TV is in standby mode or switched off.
Note: Follow the on screen instructions for operating the related
features.
IMPORTANT – Please read these instructions fully before installing or
operating
WARNING: This device is intended to be used by persons (including
children) who are capable / experienced of operating such a device
unsupervised, unless they have been given supervision or instruction
concerning the use of the device by a person responsible for their safety.
-
Use this TV set at an altitude of less than 2000 meters above the sea level, in dry locations and in regions with moderate or tropical climates.
-
The TV set is intended for household and similar general use but may also be used in public places.
-
For ventilation purposes, leave at least 5cm of free space around the TV.
-
The ventilation should not be impeded by covering or blocking the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
-
The power cord plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord. A damaged power cord/plug can cause fire or give you an electric shock. Handle the power cord by the plug, do not unplug the TV by pulling the power cord. Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this should only be done by qualified personnel.
-
Do not expose the TV to dripping or splashing of liquids and do not place objects filled with liquids, such as vases, cups, etc. on or over the TV (e.g., on shelves above the unit).
-
Do not expose the TV to direct sunlight or do not place open flames such as lit candles on the top of or near the TV.
-
Do not place any heat sources such as electric heaters, radiators, etc. near the TV set.
-
Do not place the TV on the floor and inclined surfaces.
-
To avoid danger of suffocation, keep plastic bags out of the reach of the babies, children and domestic animals.
-
Carefully attach the stand to the TV. If the stand is provided with screws, tighten the screws firmly to prevent the TV from tilting. Do not over-tighten the screws and mount the stand rubbers properly.
-
Do not dispose of the batteries in fire or with hazardous or flammable materials.
WARNING -
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
-
Excessive sound pressure from earphones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case.
Caution | Serious injury or death risk |
---|---|
Risk of electric shock | Dangerous voltage risk |
Maintenance | Important maintenance component |
Markings on the Product
The following symbols are used on the product as a marker for restrictions and precautions and safety instructions. Each explanation shall be considered where the product bears related marking only. Note such information for security reasons.
- Class II Equipment: This appliance is designed in such a way that it does not require a safety connection to electrical earth.
- Hazardous Live Terminal: The marked terminal(s) is/are hazardous live under normal operating conditions.
- Caution, See Operating Instructions: The marked area(s) contain(s) user replaceable coin or button cell batteries.
- Class 1 Laser Product: This product contains Class 1 laser source that is safe under reason- ably foreseeable conditions of operation.
WARNING
Do not ingest the battery, Chemical Burn Hazard This product or the
accessories supplied with the product may contain a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death. Keep new and used batteries away
from children. If the battery compartment does not close securely, stop using
the product and keep it away from children. If you think batteries might have
been swallowed or placed inside any part of the body, seek immediate medical
attention.
A television may fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by taking simple
precautions such as:
- ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
- ALWAYS use furniture that can safely support the television set.
- ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
- ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
- ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
- NEVER place a television set in an unstable location.
- NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
- NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
- NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
- The equipment is only suitable for mounting at heights 2 m. If the existing television set is going to be retained and relocated, the same considerations as above should be applied.
Apparatus connected to the protective earthing of the building installation through the MAINS connection or through other apparatus with a connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator) Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws. The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction. The set should be operated only from a 220-240 V AC 50 Hz outlet. Ensure that the television is not standing on the mains lead. Do not cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance. It should only be replaced by a correctly rated and approved type. IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN.
WALL MOUNTING WARNINGS
- Read the instructions before mounting your TV on the wall.
- The wall mount kit is optional. You can obtain from your local dealer, if not supplied with your TV.
- Do not install the TV on a ceiling or on an inclined wall.
- Use the specified wall mounting screws and other accessories.
- Tighten the wall mounting screws firmly to prevent the TV from fall. Do not over-tighten the screws.
Licenses
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation. Manufactured under license from
Dolby Laboratories. Confidential unpublished works. Copyright © 1992-2020
Dolby Laboratories. All rights reserved. Google, Android, Android TV,
Chromecast, Google Play and YouTube are trademarks of Google LLC. For DTS
patents, see http://patents.dts.com. Manufactured under license from DTS
Licensing Limited. DTS, the Symbol, DTS and the Symbol together, DTS-HD, and
the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the
United States and/or other countries. © DTS, Inc. All Rights Reserved. The
Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Vestel Elektronik Sanayi ve Ticaret
A.S. is under license. Other trademarks and trade names are those of their
respective owners. DVB is a registered trademark of the DVB Project. [1]
EIA/CEA-861-D compliance covers the transmission of uncompressed digital video
with high-bandwidth digital content protection, which is being standardized
for the reception of high-definition video signals. Because this is an
evolving technology, it is possible that some devices may not operate properly
with the television. This product contains technology subject to certain
intellectual property rights of Microsoft. Use or distribution of this
technology outside of this product is prohibited without the appropriate
license(s) from Microsoft. Content owners use Microsoft PlayReadyTM content
access technology to protect their intellectual property, including
copyrighted content. This device uses PlayReady technology to access
PlayReadyprotected content and/or WMDRM-protected content. If the device fails
to properly enforce restrictions on content usage, content owners may require
Microsoft to revoke the device’s ability to consume PlayReadyprotected
content. Revocation should not affect unprotected content or content protected
by other content access technologies. Content owners may. require you to
upgrade PlayReady to access their content. If you decline an upgrade, you will
not be able to access content that requires the upgrade. The “CI Plus” Logo is
a trademark of CI Plus LLP. This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or distribution of such
technology outside of this product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
Wireless LAN Transmitter Specifications
Frequency Ranges | Max Output Power |
---|---|
2400 – 2483,5 MHz (CH1-CH13) | < 100 mW |
5150 – 5250 MHz (CH36 – CH48) | < 200 mW |
5250 – 5350 MHz (CH52 – CH64) | < 200 mW |
5470 – 5725 MHz (CH100 – CH140) | < 200 mW |
Country Restrictions
This device is intended for home and office use in all EU countries (and other
countries following the relevant EU directive) without any limitation except
for the countries mentioned below:
Country | Restriction |
---|---|
Bulgaria | General authorization required for outdoor |
use and public service
Italy| If used outside of own premises, general authorization is required
Greece| In-door use only for 5470 MHz to 5725 MHz band
Luxembourg| General authorization required for network and service supply(not
for spectrum)
Norway| Radio transmission is prohibited for the geographical area within a
radius of 20 km from the centre of Ny-Ålesund
Russian Federation| In-door use only
Israel| 5 GHz band only for 5180 MHz – 5320 MHz range
The requirements for any country may change at any time. It’s recommended that user checks with local authorities for the current status of their national regulations for 5 GHz wireless LAN’s.
Disposal
The following information is only for EU-member states:
Disposal of products
The crossed-out wheeled dust bin symbol indicates that products must be
collected and disposed of separately from household waste. Integrated
batteries and accumulators can be disposed of with the product. They will be
separated at the recycling centres. The black bar indicates that the product
was placed on the market after August 13, 2005. By participating in a separate
collection of products and batteries, you will help to assure the proper
disposal of products and batteries and thus help to prevent potential negative
consequences for the environment and human health. For more detailed
information about the collection and recycling programmes available in your
country, please contact your local city office or the shop where you purchased
the product.
Disposal of batteries and/or accumulators
The crossed-out wheeled dust bin symbol indicates that batteries and/or
accumulators must be collected and disposed of separately from household
waste.
If the battery or accumulator contains more than the specified values of lead
(Pb), mercury (Hg), and/or cadmium (Cd) defined in the European Battery
Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/ or
cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure
the proper disposal of products and batteries and thus help to prevent
potential negative consequences for the environment and human health. For more
detailed information about the collection and recycling programmes available
in your country, please contact your local city office or the shop where you
purchased the product.
REACH information
The European Union (EU) chemical regulation, REACH (Registration, Evaluation,
Authorization and Restriction of Chemicals), entered into force on 1 June
2007.
Toshiba will meet all REACH requirements and is committed to provide our
customers with information about the presence in our articles of substances
included on the candidate list according to to REACH regulation. Please
consult the following website www.toshibatv.com
for information about the presence in our articles of substances included on
the candidate list according to REACH in a concentration above 0.1 % weight by
weight.
EU Conformity Statement
This product is carrying the CE-Mark in accordance with the related European
Directives. Responsible for CE-Marking is Vestel Poland sp. zo.o. ul. Salsy 2,
02-823 Warszawa, Polska. This product is labeled with the CE Mark in
accordance with the related European Directives, notably RoHS Directive
2011/65/EU. Furthermore the product complies with the Ecodesign Directive
2005/32/EC (EuP) and 2009/125/EC (ErP) and its related implementing measures.
This equipment corresponds to requirements of the Technical Regulation on
limitation of usage of certain dangerous substances in electrical and
electronic equipment. Find out all you need to know about the latest, trend-
setting TV technology on our website. www.toshiba-tv.com You can review your TV user manual online or download as you
like
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>