SUNTEKCAM WiFi-900 Pro WiFi Trail Camera User Manual
- June 5, 2024
- SUNTEKCAM
Table of Contents
WiFi Trail Camera
Model： WiFi900Pro
Use Manual
SPECIFICATIONS
Photo recording
| Photo resolution | 30 / 24 / 20 / 16 / 12 / 8 / 5 / 3MP |
|---|---|
| File format | JPG |
| Time lapse mode | 5 / 30min ； 1 / 2 / 3 / 6 / 12 / 24Hour |
| Multi-shot mode | Up to 9 photos per detection |
| Stamp (photos and video) | Date, time, temperature (℃ /℉)and moon phase |
| Capture mode | Camera / Video / Camera＆ video / Time lapse |
Video recording
| Video resolution | 4K / 2K/ 1080P / 720P / WVGA |
|---|---|
| File format | MP4 / H.265 |
| Video length | 5s /10s / 30s / 60s / 90s |
| Capture mode | Colorful mode in daytime, black and white mode at night |
WiFi/APP/Bluetooth
Scan QR code to Download WIFI Vision Distance 50M| Bluetooth WiFi On / Off
Bluetooth Connection Distance 5M
---|---
https://apps.apple.com/cn/app/id1480793143
App (IOS)
WiFiCameraSum|
https://play.google.com/store/apps/detailsid=com.dkhs.wificamera
App (Android)
WiFiCamera
Memory storage
Support
- Internal memory: none
- External memory: Micro SD card (up to 256GB, Not included)
Viewing
Built-in screen TFT 2.0”
Power source
| Alkaline Battery | 1.5V AA Battery*8 Rechargeable |
|---|---|
| Lithium Battery | lithium AA battery DC 9V 1A |
| External Power Jack | (3.5×1.3mm) |
Detection system
| Motion Sensor | 1x PIR |
|---|---|
| Detection Angle | 120° |
| Detection Range | Adjustable from 1 to 98 Ft |
| Trigger Speed | 0.2second |
| The delay between each detection | 1/10 seconds, 1/3//5/10/15/30 minutes |
Night time illumination system
| Infra LEDs | 44pcs LEDs |
|---|---|
| Flash Range | ＜ 98 Ft |
| Exposure | Auto / 100 / 200 / 400 |
Optical field of view
120°
Dimensions
150mm” x 100mm” x 60mm”
Recommendations
Operating temperature: (-4℉to + 158℉) (-20℃ to + 70℃)
Waterproof level
IP 66
THE BASICS
INSTALLATION
Step 1
Open the battery cover and insert 8 batteries(AA) following the positive and
the negative battery sign.
Close the battery cover to Resist water and dust
WARNING
Be Sure to put AA batteries in the correct direction. Inserting batteries
incorrectly will cause permanent damage.
Step 2
Step 3
- Slide the mode switch from OFF to TEST to activate the camera and view the user setup screen.
- And then slide the mode switch from TEST to ON.
- The camera will start working after 10 seconds countdown, meanwhile, the red indicator light will blink.
Step 4
Scan the QR codes below or search for“WiFiCameraSum” on the Apple AppStore
or search for “WiFiCamera” on Google Play to download the app.
IOS
https://play.google.com/store/apps/details?id=com.dkhs.wificamer
a|
Android
https://play.google.com/store/apps/details?id=com.dkhs.wificamera
---|---
Step 5
|
---|---
Open the APP on your cellphone and tap “Search Device” at the left lower
corner| Select “GCBT40” and then tap “ your phone and camera with Bluetooth.
” to connect You can see the camera flashing yellow light one time and then
flashing blue light.
Step 7
- Back to the main page of the APP and then tap “Connect WiFi”.
- Go to the WiFi setting on your phone, select
- “CAM_XXXXXXXXXXXX” Enter password “12345678”. (WiFi name and password can be changed in the APP when connected).
GETTING START
Night| Day
---|---
EXTERNAL POWER SUPPLY
Use a 12V DC Power source (Not included)
OPERATING BUTTON
MENU Menu Button — Menu Setting
REPLAY Shutter Button — Start/End Video Recording or Photo Taking
Video Button — Video Recording Mode
Camera Button — Photo Mode
Replay Button — Replay Mode
WiFi Button： ON/OFF WiFi and “OK”
SETUP MENU
| Setup | Sub Menu | Description |
|---|---|---|
| Mode | Camera,video,camera &video, Timelapse | Picture, video, picture, and |
video, taking pictures regular
Resolution| 4K,2K, 1080P, 720P, WVGA(480P)| Video Resolution
Video Length| 5/10/30/60/90 Seconds| Each Video max 90 sec, default lOsec
Record Audio| On / Off| Video With Sound
Setup| Sub Menu| Description
---|---|---
Image Size| 30MP/24MP/20MP/16MP/ 12MP/8MP/5MP/3MP| Image resolution
Interval| 1/10sec,1/3/5/10/15/30min| Max 30 minutes delay
Time Lapse| 5/30min;1/2/3/6/12/24Hour| Take pic every 5min
Sequence| 1/3/6/9 pictures| Max 9 pics one shot
ISO| Auto/100/200/400| Exposure level
Overwrite| On / Off| Cycle Recording
PIR Sensitivity| High/Medium/Low| Adjust PR sensitivity
Language| EN/FR/DE/IT/ES/POR/ HRV/DAN/SVE/SUO/POL /PYC| Adjust PIR sensitivity
Frequency| 50HZ / 60HZ| Screen refresh rate
Camera ID| CAM000| 6 numbers or letters
Password| On / Off| 4 numbers
Working Timer| 00:00:00 to 23:59:59| N/L
Date / Time| DD/MM/YY| N/L
Format| OK / Cancel| Format memory card
Default Setting| OK / Cancel| Back to default
Version| | Camera firmware version
In The box
TROUBLESHOOTING
Q: What is the range of WiFi and Bluetooth?
A: The range of camera WiFi is about 98Ft in the forest or indoors and 328Ft
at open spaces. The range of camera Bluetooth is between 16 to 26 Ft.
Q: How close do i need to be to turn the wifi on using the Bluetooth?
A: The maximum distance of the camera’s Bluetooth switch is 5 meters
Q: Does it have a connection to be wired for 9vdc or 12vdc instead of a
battery?
A: Yes, you can use 9 for this camera, there is a power connector in the V DC
box, dedicated to the external power supply. Recommend using 8*1.5 AA
batteries in this trail camera to obtain maximum V battery life. ( NOT
INCLUDED )
Q: Can you change the WiFi name and password of the camera?
A: Yes, you can change different WiFi names and your own password by an app on
your phone.
Q: Can you connect to your in-home WiFi and the internet provided the
camera
A: WiFi900 Bluetooth trail camera connects with the phone Pro’s WiFi, not in
some WiFi/Internet. Download the APP on your phone and then connect with WiFi.
You can adjust the setting and check the photo /video on the phone directly.
Q: Is the app available for iPhones?
A: Yes, Trail Camera uses the “WiFiCameraSum” APP for Apple Store and the
“WiFiCamera” APP for Google Play, it’s available for Android and IOS system
phones.
FCC Warning statement：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interferencewill does not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance between 20cm from the radiator and your body.