Grkka FCTYD Spaceship Projector Lamp User Manual
- June 12, 2024
- Grkka
Table of Contents
FCTYD Spaceship Projector Lamp
User Manual
Spaceship Projector Lamp
FCTYD Spaceship Projector Lamp
Atention
★ The light source of the spaceship lamp project is strong,please do not stare
at the light source for a long time when spaceship projection lamp is in
projection mode. 
Projector Lamp Mode
Remote Control Introductions
★ Closed for 1 hours: Shut down after one hour, the light flashes
once means the setting is successful.
★ Closed for 2 hours: Shut down after two hours, the light flashes once means
the setting is successful.
★ Closed for 4 hours: Shut down after four hours, the light flashes once means
the setting is successful
Product Information
| Product material: | ABS+PC |
|---|---|
| LED Lampshade material: | PS |
| Light Source: | LED x 3 |
| W o r k I n p u t : | 5V **** 2A |
| Work Power: | 10W |
| Control Method: | Remote control&Button |
| Laser wavelength: | 532nm |
| Laser Power: | 0.3mw |
★ Spaceship Projector Lamp
Package List:
1×Spaceship Projector Lamp
1×Wooden Mount
1×USB Type-C Charging Cable (5 ft)
1×Remote Control(2*AAA batterys, included)
1×User Manual
Notice:
Please be careful not to let the cable plug press the button next to it
Servers: 24 Hours online, just for your satisfaction!
God Created Light,
Show the Beauty of Light.
FCC Caution.
(1)§ 15.19 Labelling requirements. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. § 15.21 Changes or modification warning Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. § 15.105 Information
to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>