Shenzhen Wetocke Trade Co Ltd 2A5ML-SLEPL SLEPL Point Light Instruction Manual

June 1, 2024
Shenzhen Wetocke Trade Co Ltd

Shenzhen Wetocke Trade Co Ltd 2A5ML-SLEPL SLEPL Point Light

Shenzhen-Wetocke-Trade-Co-Ltd-2A5ML-SLEPL-SLEPL-Point-Light-
PRO

Usage

  • Connection method:
  • installation:

Bluetooth remote control+CB2Lmodule 2032&2025 button battery Controllable distance 10-15M

Shenzhen-Wetocke-Trade-Co-Ltd-2A5ML-SLEPL-SLEPL-Point-Light-
FIG-1

application

Eaves Room Indoor 2. 4G can be operated within 10 meters after installing the battery DIY decoration, do anything you want to do

Controller connection scheme

Shenzhen-Wetocke-Trade-Co-Ltd-2A5ML-SLEPL-SLEPL-Point-Light-FIG
2

Press the on/off button for the duration of connecting to the app DC power connection Lamp connection Unlock the remote control

Installation method of lighting fixtures

Shenzhen-Wetocke-Trade-Co-Ltd-2A5ML-SLEPL-SLEPL-Point-Light-FIG
3

Scan the QR code to download the app
Connect the LED eaves light to the controller, turn on the power to the controller

Start the app, search and connect to the controller Enjoy the Bluetooth WiFi wireless control experience

APP Connection method

Shenzhen-Wetocke-Trade-Co-Ltd-2A5ML-SLEPL-SLEPL-Point-Light-FIG
5Shenzhen-Wetocke-Trade-Co-Ltd-
2A5ML-SLEPL-SLEPL-Point-Light-FIG 6

Notes:
For detailed operation instructions, enter the menu “Guide”

Security information

  1. The lighting fixtures are available for indoor and outdoor use
  2. Risk of electric shock
  3. The power adapter and controller should not be exposed to liquids, steam, or rainwater.
  4. Stay away from open flames
  5. Avoid rough installation surfaces and ensure that the surface is clean and dry before installation

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

For Point Light:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

For remote control: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Specifications

  • Compliance : Part 15 of FCC Rules
  • Operation Conditions: Must not cause harmful interference and must accept any interference
  • Radiation Exposure Limits : FCC compliant for an uncontrolled environment
  • Minimum Distance: 20cm between radiator and body
  • RF Exposure Requirement : General RF exposure evaluation
  • Usage : Portable exposure condition without restriction

Frequently Asked Questions (FAQ)

Q: What should I do if the device causes interference?
A: If the device causes interference, try relocating it to minimize the impact. Ensure that no obstructions are affecting the signal transmission.

Q: Can the device be used near the body?
A: For Point Light, maintain a minimum distance of 20cm between the radiator and your body to comply with FCC radiation exposure limits. For the remote control, it can be used in portable exposure conditions without restrictions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals