Gainscha GS-2406T Surpass Series Thermal Transfer Barcode Printer Instruction Manual
- June 4, 2024
- Gainscha
Table of Contents
Installation Manual
For Thermal Transfer Barcode Printer
Surpass Series
Please read this user guide before printer operation and keep this guide for reference.
Note: from the
model you purchased. As for the actual interface, please refer to the product
specifications The interface of the printer shown in the pictures may have
some differences
- If you need more information about the product, please refer to the User’s Manual on CD.
- The printer specification, accessory, spare parts, and program are subject to change without prior notice.
Print media loading
- Press two buttons on the printer’s two sides to lift and open the cover.
- Load print media into the printer; adjust the paper guide to be the same width as print media.
- Pull out the print media till it passes the gap sensor and cutter (cutter is optional), and complete media loading.
Ribbon loading
- Insert the blue ribbon roller into the new ribbon.
- Load the ribbon left side first and then the right side, and fix it well.
- Press the button to open the ribbon holder unit as per the picture
- Insert blue ribbon roller into the empty roll for ribbon collecting after printed
- Load the empty roll left side first, then the right side.
- Pull out the ribbon and stick it into the empty roll. Make sure the ribbon is flat and smooth when touching the print head.
- Put the ribbon holder back in its position as the picture shows.
Carefully close the top cover. Ribbon and print media loading diagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>