OLIGHT i3T 2EOS Slim Tail Switch Flashlight User Manual
- June 1, 2024
- OLIGHT
Table of Contents
OLIGHT i3T 2EOS Slim Tail Switch Flashlight
Specifications
- Color Temperature: COOL WHITE CCT 5700~6700K
- Color Rendering Index (CRI): 70
- High Mode: 200 lumens
- Low Mode: 5 lumens
- Beam Intensity: 963cd at 62m
- Water Resistance: IPX8
- Drop Resistance: 1.5m
- Dimensions: (L)89(D)15mm or (L)3.5(D)0.59in
- Battery: 1*1.5V AAA Alkaline battery (included)
- Weight: 41.8g/1.47oz (Including Batteries)
Product Usage Instructions
Remove the Insulating Film:
To begin using the flashlight, remove the insulating film as shown in
Figure 1.
Battery Installation
Unscrew the tail cap to insert the included AAA Alkaline battery with the
positive end facing the flashlight head. Screw the tail cap back on securely
as shown in Figure 6.
Turning On/Off
To turn the flashlight on or off, press the tail switch firmly (you will
hear a click) as shown in Figure 2.
Momentary On Feature:
To use the momentary on feature, press the tail switch slightly to turn it
on momentarily and release it to turn it off as shown in Figure 3.
Changing Brightness Levels:
- Level 1: While the light is turned on, double press the tail switch firmly to change to high or low mode as shown in Figure 4-1.
- Level 2: While the light is turned off, press the tail switch slightly once and then press it firmly once to change to high or low mode as shown in Figure 4-2.
Setting Initial Brightness Level:
- Level 1: While the light is turned off, press the tail switch slightly five times with intervals no longer than 1 second, and hold it down on the fifth press to set the initial brightness level as shown in Figure 5-1.
- Level 2: While the light is turned off, press the tail switch firmly nine times to set the initial brightness level as shown in Figure 5-2.
FAQ
-
Q: Is the flashlight waterproof?
A: Yes, the flashlight has an IPX8 water resistance rating, making it waterproof for submersion up to 1.5 meters. -
Q: How do I change the battery?
A: Unscrew the tail cap to access the battery compartment, insert a new AAA Alkaline battery with the positive end facing the head of the flashlight, and then screw the tail cap back on securely.
IN THE BOX
Multi-language dictionary, see Table 2.
Product specification, see Table 1. 01
Operating instructions as below：
- Remove the insulating film, see Figure 1.
- Turn on/off, see Figure 2. Press the tail switch firmly (you will hear a click).
- Momentary on, see Figure 3. Press it slightly to turn it on momentarily, and release it to turn it off
- Change brightness level(1), see Figure 4-1. While the light is turned on, press the tail switch firmly twice in a row.
- Change brightness level(2), see Figure 4-2. While the light is turned off, press the tail switch slightly once and then press it firmly once.
- Set initial brightness level(1), see Figure 5-1. Press slightly: While the light is turned off, press the tail switch slightly five times in a row with intervals no longer than 1 second, and hold it down on the fifth press. The current brightness will turn on for 1 second, and then change to the desired brightness level. This indicates that the initial brightness has been set successfully.
- Set initial brightness level(2), see Figure 5-2. Press firmly: While the light is turned off, press the tail switch firmly nine times. After the ninth press, the current brightness level will turn on for 1 second and then change to the desired brightness level. This indicates that the initial brightness has been set successfully.
- Battery Installation, see Figure 6.
Unscrew the tail cap to insert the battery, ensuring that the positive end of the new battery faces the flashlight head, and then screw the tail cap back on.
AVAILABLE BATTERIES
- 1 x 1.5V AAA alkaline battery (included)
- 1 x 10440 lithium battery
- 1 x AAA NiMH battery
WARNING
- Do not look directly at the light source or shine on the eyes, it may cause temporary blindness or permanent damage to the . eyes.
- Don’t leave the battery near the fire or a heated source, or throw the battery into the fire.
- Do not give the product to children to play with, in order to avoid accidental swallowing.
- Don’t store, charge or use this light in a car where inside of temperature may be over 60°C, or similar places.
NOTICE
- Do not disassemble the product.
- It is normal that the light flickers when the battery is close to running out.
- Don’t short circuit (+) and (-) terminals with metallic object intentionally.
- For long-term storage, please remove the battery.
- Do not immerse the flashlight in seawater or other corrosive media as it will damage the product.
- Don’t use damaged, deformed battery, or with broken sleeve.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual.
Table 2
Multi-language dictionary
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or
replacement.
Within 5 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an authorized retailer or Olight itself.
USA Customer Support
- cs@olightstore.com
- Global Customer Support
- contact@olightworld.com
- Visit www.olightworld.com to see our complete product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No. 6 Zhongnan Road, Changan
Town, Dongguan City, Guangdong, China.
Made in China 3.4000.0688
B. 09. 04. 2023
THANK YOU!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>