EPIROC D65 Out Performs Drill Owner’s Manual

: June 1, 2024
: Epiroc

Table of Contents

D65 Out Performs Drill
Product Information
Specifications:
Product Usage Instructions:
Installation Overview:
Safety Warnings:
Maintenance Schedule:
- Frequently Asked Questions (FAQ):
Q: Can HEPA filters be cleaned?
Q: What is the warranty claim requirement for the Brushless

D65 Out Performs Drill

“`html

Product Information

Specifications:

Manufacturer: EPIROC
Type: Drill
Model: D65
Cabin Pressure: >250 Pascals
Max Set Auto Cabin Pressure: 50 Pascals / 20 Pascals

Product Usage Instructions:

Installation Overview:

The EPIROC D65 DRILL comes equipped with the following
components for installation:

HEPA H14 Variable Speed Pressuriser
OnGuard Air Quality Monitoring & Control
HEPA Return Air Filter

Safety Warnings:

It is crucial to follow these safety precautions while using the
product:

Qualified staff must wear proper personal protective equipment
during cleaning and servicing due to dust and fibers.
Avoid working on the pressuriser system without following safe
work procedures and electrical safety measures.
Ensure all safety guards are in place while the system is
running.

Maintenance Schedule:

Follow this maintenance schedule for optimal performance:

Inspect and replace the Turbo Pre-cleaner and ensure blower
operation.
Replace HEPA filters when the capacity indicator shows 80% or
greater.
Check seals, bolts, mounts, and fittings regularly for security
and functionality.

Frequently Asked Questions (FAQ):

Q: Can HEPA filters be cleaned?

A: HEPA filters cannot be cleaned and must be replaced at the
end of their lifecycle or if the filter media is damaged.

Q: What is the warranty claim requirement for the Brushless

Blower Motor?

A: Data download is required to claim the 3-year warranty on the
Brushless Blower Motor.

“`

Kit Part Number:

+61 7 3276 7833 www.breathe-safe.com.au sales@breathe-safe.com 62 Mica Street, Carole Park, 4300, QLD

Parts and Service Manual
EPIROC D65 DRILL
HEPA H14 Variable Speed Pressuriser | OnGuard Air Quality Monitoring & Control | HEPA Return Air Filter
Controlled Document: M0037 Issue Date: 30/06/23 Revision: 1

EPIROC
D65 DRILL

CONTENTS
Installation ………………………………1 Safety ……………………………………..2 Critical Parts & Maintenance Schedule………………………………….3 Operator Guide ………………………..4 Specifications – Pressuriser………….5 Parts List……………………………….6-7 Smoke Emitter Cabin Pressure Leak Test ………………………………………..8 Technical Details……………………….9 Looms ………………………………10-11 Commissioning Procedures ……….12 User Settings Instructions …….13-21 Warranty ……………………………….22

Manufacturer Type Model Cabin Pressure Max Set Auto Cabin Pressure

EPIROC

INSTALLATION OVERVIEW

Drill

D65

250 Pascals

50 Pascals / 20 Pascals

INSTALLATION

HEPA H14 Variable Speed Pressuriser OnGuard Air Quality Monitoring & Control

HEPA Return Air Filter 1

EPIROC
D65 DRILL
WARNING
THE PRESSURISATION SYSTEM DESCRIBED IN THIS MANUAL HAS THE FOLLOWING AREAS WHICH MAY BE DANGEROUS IF NOT TREATED WITH
GREAT CARE.
QUALIFIED STAFF MUST WEAR THE CORRECT PERSONAL PROTECTIVE EQUIPMENT WHEN CLEANING AND SERVICING THIS UNIT DUE TO DUST AND FIBRES WHICH MAY BE CAUGHT BY THE STAGES OF AIR FILTRATION
DURING NORMAL UNIT OPERATION.
THE ELECTRICAL POWER SYSTEM IS SUPPLIED BY 12V DC OR 24V DC AND NO WORK SHOULD BE CARRIED OUT ON THE PRESSURISER SYSTEM WITHOUT THE CORRECT SAFE WORK PROCEDURES AND ELECTRICAL
SAFETY MEASURES BEING TAKEN, AND ALL RELEVANT CIRCUIT BREAKER OPENED TO ISOLATE THE CIRCUIT.
THE AIR FILTRATION SYSTEM MAY HAVE SEVERAL TYPES OF HIGH-SPEED ROTATING EQUIPMENT INSTALLED WITH VERY SHARP EDGES. ENSURE ALL
SAFETY GUARD ARE IN PLACE WHILE THE SYSTEM IS RUNNING.
Please be aware that HEPA filters cannot be cleaned and must be replaced at the end of their lifecycle or if filter media has been damaged.

SAFETY
Particulate Behaviour
This is the length of time it takes for a particle to drop from a height of 1.5m in STILL air.
Warehouses and workshops do not have still air, so hazardous airborne particulates may remain in air for longer, increasing chance for workers to breathe in dust. Ensure PPE is worn when installing this system.

2

EPIROC
D65 DRILL

Maintenance Schedule

The following tables show our suggested maintenance schedule for all units. Please note that site conditions may alter this. Excludes high corrosion environments.

Data download is required to claim the 3-year warranty on Brushless Blower Motor.

Inspect every 500 Hours and replace when filter is full*

Component / System

Action Required

Turbo Pre-cleaner Pressuriser Blower

Check operation of the Turbo PreCleaner. Ensure blower is operational.

HEPA Primary Filter p/n: 500000
HEPA Return Air Filter P/N: 500051

Inspect filter capacity indicator. Replace HEPA filter when 80% or greater. Vacuum out housing before replacing the filter elements. Vacuum inside cabin floor before replacing filter.

Filter Frame Assembly, Mounts, Seals and Filter Housing

Check door seals, all bolts, screws, and all mounts are secure. Check the filter canister & ensure it is correctly fitted. Check latches are operational and in good order. Replace / Re-tension fixtures and fittings required.

15,000 Hours / 36 months*

Component / System

Action Required

500 Hour Inspection

All 500-hour inspection actions.

Pressuriser’s Blower 200002

Replace BRUSHLESS Pressuriser blower.

CRITICAL PARTS & MAINTENANCE SCHEDULE

Item Part Number

1

500000

2

500051

3

200002

4

200018

5

200019

6

200021

Critical Parts Qty. Description

1 Fresh Air HEPA H14 Filter (Tested as per

EN1822)

1 HEPA Return Air Filter

1

Brushless Blower Motor 24V

1 OnGuard Main Unit Active

1 OnGuard UI

1 OnGuard Breathing Zone Sensor Pod

Service Interval
1000 Hours (>80% fan capacity) 500 Hours 15,000 Hours 10,000 Hours AR AR

Filter service hours are subject to cab sealing efficiency, site conditions and correct system use.
Suggested Schedule Servicing

Fan Capacity Indicator
The filter is serviceable if the motor capacity is between 10% & 80%. We recommend that the filter is changed if the capacity is over 80%.
*Site dependent

3

EPIROC
D65 DRILL

OPERATORS CHECKLIST

PRE-START

Visually inspect the BreatheSafe system for any damage.

Visually inspect the cabin for any damage to doors, windows, seals.

Please remove dust & debris from shoes and clothes before entering the cabin.

Ensure door(s) and windows are closed correctly.

Start engine and turn HVAC on to speed 2 (medium speed).

After fixed speed delay, the BreatheSafe display will show 50 Pascals or pre- set value.

The system is working correctly when the pascal value is green.

There is no further action required <<

NORMAL OPERATING CONDITION
Cab Air Conditioning
BreatheSafe recommends OEM air conditioning fan is set at mid speed or greater to circulate air around the breathing zone and minimise CO. Acceptable operating range for BreatheSafe fan 10-80%. >80% recommend maintenance.

ALERTS
Fixed Fan Start Delay · Allows the operator to carry out pre-start checks limiting at 30% fan speed, press the red text to disable.
CO Level Alert (if equipped) · Ensure air conditioning fan is set at mid speed or greater to circulate air and minimise CO.
Low Pressure Alarm · Cabin is not maintaining positive pressure check doors and windows are closed correctly. · Refer to maintenance department to check filters and cabin sealing. Ensure filters are serviceable.
Check Filter · Reminder to inspect or replace filter. Service hour meter requires re-set. · Refer to maintenance department.

OPERATOR GUIDE

4

EPIROC
D65 DRILL

Specifications High-Capacity HEPA Pressuriser

Blower

: Brushless Blower P/N 200002.

Protection

: Locked Rotor Protection (Sub Zero Environments) Under Voltage, Under/Over Current & Over Temperature.

Voltage

: 24VDC.

Current Draw Air Flow

: 11 amps (peak). *Note: Motor has slow start to stop excessive in-rush current.
: Up to 30-300 m3/h or 50-215 CFM.

Pre-cleaner

: Integrated VLR (Very Low Restriction). Turbo Pre-Cleaner.

Filter Element Plugs & Fittings

: BreatheSafe HEPA Primary Filter (H14=99.99% MPPS) TESTED AS PER EN1822 P/N 500000.
: Mining Spec. Deutsch electrical plugs as standard.

Construction

: High strength composite construction.

Serviceability

: Easy access HEPA filter with twist-lock (TL) dust cap single assembly.

Mounting

: Heavy Duty adjustable mounting brackets.

Design

: Fully designed in SolidWorks 3D CAD & Ansys Engineering Simulation Software.

FEA Testing

: Critical components FEA (Finite Element Analyst) tested in Solid Works Simulation.

CFD Testing

: CFD (Computational Fluid Dynamics) simulations in Flow Works to ensure optimum air flow through the system.

SPECIFICATIONS HIGH-CAPACITY HEPA PRESSURISER

DH DHPR DHAC DHACPR CPM CPU DB DPM GAS HEPA HPAFU HRAF HVAC MAF OEM PM RH TEMP TS UI VMS VS OGSP CO2s

List of Abbreviations Dual HEPA Dual HEPA Powered Recirculation Dual HEPA Activated Carbon Dual HEPA Activated Carbon Powered Recirculation Cabin Pressure Monitor Central Processing Unit Decibel Sensor Diesel Particulate Matter Gas Sensor High-Efficiency Particulate Air Filter High Pressure Air Filtration Unit HEPA Return Air Filter Heating Ventilation and Air Conditioning Mass Air Flow Original Equipment Manufacturer Particulate Mass Relative Humidity Temperature Touch screen User Interface Vehicle Monitoring System Vibration Sensor OnGuard Sensor Pod CO2 Sensor INPRESS TS

5

EPIROC
D65 DRILL

Item No. Qty.

1

2

4

3

1

4

1

5

1

6

1

7

1

8

1

9

1

10

1

11

1

12

3

13

3

14

4

15

8

16

4

17

5

Description Pre-cleaner Hood & Rotor Assy
Pre-cleaner Injector Ring TL Fan Blade (inc. in #7)
TL Nose Cone / Pre-cleaner TL Motor Housing TL Filter Housing 24v DC Brushless VSD Motor & TL Fan Blade O Ring Seal Kit 2 Parts Included in 8 Wiring Sleeve HEPA H14 Filter M6 Nyloc Nut M6 x 55mm Hex Bolt M8 x 190 Hex Bolt M8 x 22mm O/D HD Washer M8 Nyloc Nut M4 x 75mm Pan Head Phillips Screw

Part No. 200004
200005 200006
200007 200008 200009 200002 200010 200011 200012 500000 300218 (M6NYL) 300982 (M655B) 301136 (M8190B) 300230 (M8222HTW) 300249 (M8NYL) 300162 (M475PBH)

4

2 1

PARTS LIST TL4 24V DC PRESSURISER UNIT
PRESSURISER ASSEMBLY No: 200000

12 5
13 7

11 6

9

16

15

8

14

10

17

6

EPIROC
D65 DRILL

Item No. 1
2 3
4 5 6 7 8 9 10 11 12 13 14 15 16

Part No –
08579 09475
13875 200000 250008 250013 250044 300388-1000 200306 200307 200308 300480 300481 200018 200021

Rev Description

– OnGuard Controller Assembly

3 Inlet Manifold Assy & Duct Assy

3 Monitor Mount & Brkt Assembly

2 R.A.F Roof Assy

–

HPAFU 24VDC VSD TL4

– TL Mount Brkt. 81.5mm

– Clamp Stauff GR7 Brkt TL

– TL Water Cannon Guard

– 76 SS Tube @ 1000L

–

Ø76.2 x 45SD Elb

– Ø76.2 x 90LD Elb

– Ø76.2 x 90SD Elb – STAUFF Shell GR7 76.1 Black – Stauff GR7 Cover Plate

OnGuard Main Unit Active Breathing Zone Sensor Pod

Qty Colour

Group

1 –

Stock Item

1 Berry Gray PEF 73-370 Assembly

1 Satin Black MX88-124 Assembly

1 –

Stock Item

1 (As Req’d) 1 (As Req’d) 1 (As Req’d) 2 (As Req’d) 1 –

Stock Item Stock Item Stock Item Pipework Pipework

1 –

Pipework

1 2 1 (As Req’d) 1 1 –

Pipework Pipework Pipework Stock Item Stock Item

PARTS GA COMPLETE ASSEMBLY No:

D10

15 16
Return Air Sensor Pod Optional*
7

EPIROC
D65 DRILL

Do not handle until MSDS & all safety precautions have been read and understood. Use personal protective equipment as required.
Before use, carefully read the product label. Safe work practices are advised to avoid eye or skin contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking, and smoking in contaminated areas. Avoid inhalation. Mechanical extraction ventilation is recommended when the removal of atmospheric contaminants is required. Maintain dust / fume levels below the recommended exposure standard. For small amounts, absorb with sand, vermiculite or similar and dispose of at an approved landfill site.

SMOKE EMITTER CABIN PRESSURE LEAK TEST
Link to MSDS: SMOKE GENERATOR TQ7621AT30S.pdf

WARNING
For Professional Use Only keep out of reach of children. Do not ignite near or around flammable materials. Use only in well-ventilated areas, outdoors, and/or with proper respiratory protection. Persons with respiratory sensitivity should avoid exposure to any smoke. Concentrated smoke may cause severe burns to the skin, eyes, or respiratory system. Improper use may result in sufficient inhalation of smoke to cause respiratory tract irritation and lung damage. Harmful if swallowed.

Personal Protective Equipment (PPE)
Safety glasses must be worn at all times. Sturdy footwear with rubber soles must be worn. Respiratory protection devices may be required. Gloves may be worn.

DANGER
Use only as directed. Do not handle until all safety precautions, including Safety Data Sheet, have been read and understood. The product contains hexachloroethane. Wear protective clothing. If exposed or concerned, get medical advice. Store in a cool, dry, secure location. KEEP OUT OF REACH OF CHILDREN. Dispose of contents/container per location regulations. When used as directed, exposure should be limited and usually poses no hazard because the hexachloroethane is consumed inside the tube as smoke is produced.
Directions: (Smoke Bomb)
1. Ensure other workers in close proximity are informed of use. Place on a non-combustible container, away from flammable materials.
2. Place at Blower intake, or upwind of target area, or near centre of space. 3. Orient “Smoke Issues Here” toward air stream, away from surfaces. Place candle on a flame / heat resistance plate if not
it will melt into the plastic surface. 4. Ensure smoke will not create any hazard where it is anticipated to go. 5. Ignite emitter inside the cabin using site approved device i.e., solder torch or `lighter’ and conduct smoke test. 6. Do not touch or hold smoke generator after ignition item becomes very hot & remains hot after use.

Pre-operational Safety Checks
Locate and ensure you are familiar with all machine operations and controls. Check work area and walkways to ensure no slip/trip hazards are present. Ensure the work area is clean and clear of any flammable material & fire extinguish device is present.
Operational Safety Checks
Ensure the machine is correctly isolated / immobilized. Ensure other persons do not inhale smoke haze. Take care and do not place a lit emitter close to a flammable surface.
Ending Operations and Cleaning Up
Leave the work area in a safe, clean, and tidy state.

Smoke Emitter Cabin Pressure Leak Test
1. The pressuriser system is switched on (TEST MODE). 2. Hold the smoke emitter angled down. 3. Ignite emitter using site approved ignitor i.e., solder torch or `lighter’. 4. When the product ignites, remove the lighter. 5. If the product flames up, blow out the flame. 6. Place the emitter in a non- flammable container and place it inside the cabin at floor level and close the door/windows. 7. Observe smoke leaks to indicate worn-out or broken seal locations. Check leakage points outside the cabin. 8. Do not come into contact with or inhale smoke haze. 9. Wait until the smoke haze completely disperses before re-entering the cabin. Open door to allow sufficient ventilation of
smoke prior to entering cabin.

Falls Fumes Fire

Potential Hazards

May cause cancer
Exposure is highly unlikely when the product is used as directed. Direct contact with the product does not occur.

Don’t
Do not use if an open flame is forbidden.
Never leave the emitter [cabin test] unattended.

*This SWP does not necessarily cover all possible hazards associated with this equipment and should be used in conjunction with other references. It is designed as a guide to be used to compliment training and

as a reminder to users prior to equipment use.

8

EPIROC
D65 DRILL
Wiring Diagram

TECHNICAL DETAILS

Reference 1 2 3 4 5 6

Part OnGuard Main Unit Active OnGuard Breathing Zone Sensor Pod OnGuard Return Air Zone Sensor Pod OnGuard User Interface TL4 Pressuriser HEPA H14 Fresh Air Filter

Part Number 200018 200021 200020 200019 200000 500000

TL4 Pressuriser

v 9

EPIROC
D65 DRILL

Item No. 1

Part No. 400009 (L100009)

Rev Description N/A 4 Pin 0.5m Master Controller Loom

Qty Colour Category

1 –

Stock Item

PARTS LIST MASTER CONTROLLER LOOM
WIRING LOOM No: 400009

10

EPIROC
D65 DRILL

Item No. 1 2 3

Part No. 400002 400003 400004

Rev Description N/A 2 Pin 5m Main Power & Earth Supply Loom N/A 3 Pin 5m Power, Earth & Speed Control Loom N/A 5m Air Pressure Sense Pipe w/ Sleeving

Qty Colour Category

1 –

Stock Item

1 –

Stock Item

1 –

Stock Item

PARTS LIST PIN LOOMS & AIR PRESSURE PIPE
WIRING ASSEMBLY No: L100001

Part Number 400002 (L100002) To be Advised To be Advised To be Advised To be Advised To be Advised To be Advised

Dimension A 5000.0 mm –

Part Number 400004 (L100004) To be Advised To be Advised To be Advised To be Advised To be Advised To be Advised

Dimension B 5000.0 mm –

Part Number 400003 (L100003) To be Advised To be Advised To be Advised To be Advised To be Advised To be Advised

Dimension B 5000.0 mm –

11

EPIROC
D65 DRILL

Commissioning Procedures

COMMISSIONING PROCEDURES CABIN PRESSURISER

Follow each step of the installation guide that was supplied with the BreatheSafe kit. Cabin sealing is an integral part of RS20 & ISO 23875; you must ensure that cabin seals are adequate for maintaining positive pressure. In addition, the site (end- user) must have the correct procedure(s) for servicing OPERATOR enclosure seals in a proactive manner rather than reactive. Items such as door and window seals must be in good working order or new seals FITTED before the BreatheSafe system installation.
How to run Max Speed Commissioning Test 1. Open the action menu’ by holding down the centre enter () button or by pressing the up () and down () buttons at the same time. 2. If not already displayed, press the down () button to cycle through the menu options until theMax Speed Test’ option is displayed 3. Ensure the cabin door and windows are completely closed. 4. Press Enter to begin a max speed test.
Submission for commissioning procedure as per the diagram below:

Proceed to online commissioning:
Commissioning – BreatheSafe (breathe-safe.com.au)

The commissioning images required are:

Fill in the BreatheSafe Service Tag with the following details:

· ID plate / Machine Serial Number / Asset Number or Call Sign
· INPRESS TL Pressuriser location · HEPA Return Air Filter Location Option: Powered Return Air Filter · Cabin Pressure Display Location Including the “System Check” maximum
cabin pressure result with motor output capacity %

· Machine Serial Number and Installers details
· Date installed and System Check result (max cabin pressure) · The set cabin pressure with actual pressure and motor percentage
output
· Verify the 250-pascal threshold was achieved = pass OR not achieved = fail**

Please upload machine and installation details in conjunction with the required images. A Commissioning Certificate will be sent to the email address you nominate. **Extended

warranty for (RS20 & ISO 23875) BreatheSafe Systems is only applicable to operator enclosures meeting this requirement.

12

EPIROC
D65 DRILL
1.0 HOW TO OPERATE THE UI
Controlling the UI is performed exclusively with the 5-button keypad located on right side of the UI.
· The up () and down () arrows are used to cycle through: o Menu Items (Functions or Configurations) o Characters/Numbers when editing a parameter
· The Left () and Right () arrows are used to: o Move between character selection when editing a parameter. o Navigate to the X’, which will allow the user to exit the current menu/selection when activated · The enter () button is used to: o Enter a sub-Menu (for editing Configurations) o Confirm actions (when a parameter is set or to activate a function) Pressing the enter () button, will either activate the function shown on the screen or, if editing a parameter, will cycle to the next item in the configuration. Pressing enter () at the end of a menu will return the user to the main menu. 2.0 HOW TO GAIN ACCESS TO THE OPERATOR AND ADMIN MENUS 1\. Press the up () and down () buttons at the same time. 2. Press the down () button untilAdmin Access’ appears.

USER SETTINGS INSTRUCTIONS
3. Locate the appropriate Access Credentials (Operator or Admin), these are provided on the info sheet. Example shown below.
Figure 1: Excerpt from Info sheet showing access credentials
4. Enter the Access Pin. The up and down buttons are used for setting the character at the current cursor position. The right and left buttons are used for moving the cursor along.
5. Press the enter button. 13

EPIROC
D65 DRILL
3.0 HOW TO ACCESS THE WEB INTERFACE VIA THE WI-FI ACCESS POINT (AP)
1. Open any Web Browser from a 2.4GHz Wi-Fi capable device 2. On the device, connect to the Wi-Fi network being hosted by the
OnGuard. The details of the OnGuard’s AP are found on the Info sheet (example shown below). These details are also shown in `Net Config’ in the Admin menu on the OnGuard UI.

USER SETTINGS INSTRUCTIONS
3. Open a web browser. Enter the IP address of the OnGuard Access Point (AP) into the address bar (Default is 192.168.7.1 for all OnGuard Kits).
4. The client will be prompted to enter a username and password. These are the same access credentials as for the OnGuard UI. admin’ oroperator’ must be entered as the username and the respective pin must be entered as the password.

Figure 2: Excerpt from Info sheet showing OnGuard’s AP
Note: This network name and password is an example only. Refer to the provided info sheet for the appropriate network name and password.

Figure3: Excerpt from Info sheet showing access credentials

14

EPIROC
D65 DRILL
4.0 HOW TO CONFIGURE THE ONGUARD TO CONNECT TO AN EXTERNAL WI-FI NETWORK VIA THE WEB INERFACE
1. Connect to the web interface via the Access Point (See Section 2.0) 2. Ensure client is logged in as admin’ 3. ClickEdit’ under `Current Configuration’ heading

USER SETTINGS INSTRUCTIONS
8. Once the OnGuard has restarted, reconnect to the web interface via the AP 9. Navigate to Help’ ->About’

4. Scroll down to WiFi, Client Mode’ 5\. Enter the details of the network the OnGuard will connect to under Network Name’ and Password’ 6\. ClickSave Changes’ 7. Click `Restart OnGuard unit to Apply Config

10. Verify the OnGuard has successfully connected to the Wi-Fi network by checking that WiFi Client’ isUp’ and has an IP Address assigned. If the status of the Wi-Fi Client is Down’, manually restart the OnGuard Main Unit by turning it off and then powering it back on after 10 seconds. 11\. The OnGuard web interface can now be accessed on this network by navigating to the IP address displayed next toWiFi Client’ (as above example) on any normal web browser.
15

EPIROC
D65 DRILL
5.0 HOW TO CONFIGURE THE ONGUARD TO CONNECT TO A STANDARD WI-FI NETWORK VIA THE USER-INERFACE (UI)
1. Enter the Admin menu on the UI using the admin’ pin (See Section 2.0) 2. Press the down () button until theNet Config’ option appears

USER SETTINGS INSTRUCTIONS
7. Enter the password for this network under `STA Password:’

3. Press the Enter button 4. Press the down () button until the `WiFi STA Config’ option appears.

8. Select the addressing type by cycling through the options with the up () and down () buttons. The default option is dhcp and is standard for most networks. Consult your network admin to confirm the
configuration of the network being connected to.

5. Press Enter 6. Enter the name of the Wi-Fi network for the OnGuard to join under `STA
Network:’

9. Press Enter 10. The UI will return to the Network menu. From here, scroll to the
Autostart’ option using the up () or down () button. 11. Press Enter. Verify theWiFi STA’ is one of networks listed for automatic
start at boot. Change the networks auto-started on boot using the up () or down () buttons.
16

EPIROC
D65 DRILL

USER SETTINGS INSTRUCTIONS

12. Press Enter. 13. The UI will return to the Network menu. From here, scroll to the Start Net’ option using the up () or down () button. 14\. Press Enter 15. The UI will return to the Network menu. Confirm the OnGuard has connected to the desired network by navigating toNet Status’. 16. Press Enter until the status of `WiFi STA’ is shown:

17. The IP address displayed (10.60.60.72 in the example) is the address of the OnGuard web interface on the network. Navigate to this address via a web browser on a device connected to the same network to access the OnGuard’s web interface.
TROUBLE SHOOTING 1. If the network status in step 13 shows `Wi-Fi STA: down’, the OnGuard has not successfully connected to the network. 2. Verify all network details were entered correctly in steps 6-8. 3. Restart the OnGuard by powering off the Main Unit for 10 seconds. 4. Once the OnGuard has restarted, return to step 13. 5. Note: Sometimes multiple restarts are required.
17

EPIROC
D65 DRILL
6.0 HOW TO ADJUST OR DISABLE THE ALARMS ON THE UI
1. Enter the Admin menu on the UI using the admin’ pin (See Section 2.0). 2. Press the down () button until theLowPr. Alerts’ / HighPr. Alerts’ option appears. 3. Press Enter to access theBuzzer Volume’ 4. Use the up () and down () button to adjust the buzzer volume from 1
to 16, 16 being the highest. 5. To disable the buzzer, adjust the volume to 0. 6. Press Enter 7. If the buzzer is enabled (volume 1 or above), the Buzzer Type’ option will appear. 8. Use the up () and down () button to adjust the buzzer type until a suitable buzzer has been selected. 9. Press enter to confirm selection. 7.0 HOW TO DISABLE/ENABLE DUST ALERTS ON THE WEB INTERFACE 1\. Sign in to the Web Interface asadmin’ (see section 3.0) 2. Click Edit’ underCurrent Configuration’ heading.

USER SETTINGS INSTRUCTIONS
3. Scroll down to [Sensor Name] Particulate Matter Sensor’ (e.g. Breathing Zone Particulate Matter Sensor). 4\. ClickHigh Dust Level Alert Enabled?’ and select no’ 5\. Scroll to the bottom and selectSave Changes’.

18

EPIROC
D65 DRILL
8.0 COMMISSIONING: HOW TO RUN A MAX SPEED TEST
5. Open the action menu’ by holding down the centre enter () button or by pressing the up () and down () buttons at the same time. 6\. If not already displayed, press the down () button to cycle through the menu options until theMax Speed Test’ option is displayed

USER SETTINGS INSTRUCTIONS
9.0 COMMISSIONING: HOW TO RUN A PRESSURE TEST
1. Access the Admin menu on the UI using the admin’ pin (See Section 2.0) 2. Press the down () button until thePressure Test’ function is displayed.

7. Ensure the cabin door and windows are completely closed. 8. Press Enter to begin a max speed test.

3. It is critically important that the cabin door and windows are fully closed during this operation. If the Minimum Pressure percentage is not reached, a Test Failure alert is raised.
4. Press Enter to begin a Pressure test.

19

EPIROC
D65 DRILL
9.0 HOW TO REPLACE A SENSOR POD
1. Switch off power to the OnGuard Main Unit, as it powers the Sensor Pod.
2. Remove the existing Sensor Pod from where it is mounted by removing the 4 M4 Bolts from the corners of the case, the mounting holes are shown in the figure below:
3. Find the replacement Sensor Pod, do not mount this in the previous Sensor Pod’s place yet.
4. Remove the 4 M3 screws from the top of the sensor pod and remove the lid.

USER SETTINGS INSTRUCTIONS
Note: Replace the RJ45 cable as well if there is any visible damaged to the cable or plug
6. Replace the lid, ensuring that the RJ45 cable is clamped in the hole between the lid and the base. Special care must be taken to ensure the 4 coloured wires inside the case are not clamped by the lid when putting it back on the case.
7. Replace the M3 screws. Do not over tighten the screws as excessive force will strip the threads inside the plastic.
8. Power on the OnGuard Main Unit. 9. Sign in to the Web Interface as admin’ (see section 3.0) 10. ClickEdit’ under `Current Configuration’ heading

5. Plug the RJ45 cable used to power the previous Sensor Pod into the female port on the sensor board, clip facing upwards.

11. Scroll down to the `Connect Accessories’ heading

20

EPIROC
D65 DRILL
12. Verify the newly replaced Sensor Pod has successfully connected to the OnGuard by checking the number under Hardware Serial Number’ matches the serial number on the sticker attached to the Sensor Pod. 13\. UnderAssigned to Zone’, the new sensor will display None’. Click this drop-down menu and select a zone the same zone that applied to the replaced sensor pod. This will one of the zones that is not already assigned to another sensor pod. For example, if the other connected sensor is assigned to Breathing Zone’, the replacement sensor is most likely the `Return Air zone’ sensor.

USER SETTINGS INSTRUCTIONS
21

EPIROC
D65 DRILL

Express Warranty
All BreatheSafe products carry a warranty against defects in materials or workmanship, provided the defects are not from factors outside of BreatheSafe’s control (including neglect, lack of maintenance, improper installation or operation, unauthorized servicing repair, etc.). BreatheSafe will replace goods defected in material or workmanship at our Queensland factory or designated branch*. All parts deemed as failed or faulty must be returned to BreatheSafe for evaluation unless otherwise stated in writing.
Note- Systems must be installed and commissioned as per BreatheSafe installation and commissioning instructions. Once commissioned, the online commissioning sheet must be filled in, extending the components warranty as below. In addition, the system must be serviced and maintained correctly and by trained and qualified personnel. This requisite includes BreatheSafe technicians, qualified automotive air-conditioning technicians, or qualified auto electricians.
Warranty period Standard
· 1 year or 10,000 hours (whichever occurs first). · Controllers 1 year no extended warranty option. · Warranty Period Extension when commissioning documents are registered online within 28
days of installation · Extended warranty only offered if commissioning maximum pressure test reaches at least
250Pa. · Brushless motor fixed speed two years, or 10,000 hours (whichever occurs first). · Variable speed brushless motor 15,000 hours, or 3 years (whichever occurs first).
Must be supplied with a variable speed pressure controller, data download required for 3-year warranty option. Link to online Commissioning and Extended Warranty Registration form https://www.breathe-safe.com.au/commission/
What is not covered under Express Warranty?
· Failures are due to incorrect application. · Damage resulting from neglect, misuse, lack of maintenance, improper
installation, or operation, inappropriate or abnormal use, accidental or unauthorized servicing repair. · Failures are due to parts not being sold or approved by BreatheSafe. · Failures arising from any other cause that is not directly related to a defect in material or workmanship.
This Express Warranty is VOID if the product is altered, modified, or used in the manner it was not designed for, also including unauthorized repairs, or using maintenance and repair parts other than those supplied by BreatheSafe.

BreatheSafe responsibilities

WARRANTY

If there is a defect in material or workmanship not caused by the excluded failures during the warranty period, BreatheSafe will either replace the defective goods at our Queensland factory, or designated branch. *
Alternatively, BreatheSafe may elect to provide new replacement parts, BreatheSafe approved repair parts or assembled components needed to repair the defect. BreatheSafe reserves the right to provide a refund of the purchase price in lieu of replacement or repair at BreatheSafe’s discretion. The replacement or repaired product will be sent to you freight prepaid by the customer or made available for pick-up on site.

Users Responsibilities
The customer should ensure that the system is maintained according to BreatheSafe service requirements and only authorized parts must be used to service and maintain BreatheSafe systems. In the event of a suspected warranty claim, BreatheSafe should be contacted in the first instance to arrange the repair or to assist with diagnosis. Claims should be made within one week of the repair.
After contacting BreatheSafe, you may be required to deliver or send the parts to BreatheSafe’s Queensland factory or designated branch. * Link to online Warranty claim form https://www.breathe-safe.com.au/warranty/

Exclusion and Limitations on Damages and Remedies
This warranty is provided in lieu of all other warranties, written or oral, whether expressed by affirmation, promise, description, drawing, model, or sample. To the extent allowed by law, all warranties other than this warranty, whether express or implied, including implied warranties of fitness for a particular purpose, are disclaimed. The maximum liability of BreatheSafe under this warranty shall not exceed the original purchase price of the product. Interference with the equipment by or abuse, or by operating the equipment at ambient temperatures or with electrical power characteristics outside the ranges indicated in our specification shall be excluded from this warranty, as shall consequential damages.
Excluded from any express warranty are costs incurred in relation to service outside our factory our designated service branch, including traveling time, waiting time, transport costs, mechanical and overtime payments required. As per Australian Consumer Law: You are entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done, you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.
*This express warranty gives you specific legal rights, and you may also have other rights that vary from country to country.
22