SHARPER IMAGE 1015793 Spastudio Digital Scale User Manual
- June 4, 2024
- Sharper Image
Table of Contents
SPASTUDIO® DIGITAL SCALE
WI-FI SMART FULL BODY COMPOSITION SCALE
CONTENTS
SPASTUDIO® Digital Scale
SPECIFICATIONS
Model: 1015793
Dimensions: 14.17 in. x 12.13 in. x 1.16 in.
Weight Range: 1.1 lbs. – 396 lbs. (0.5 kg -180 kg)
Display Info: Weight (lbs. and kg) and BMI
Batteries: 3 AAA 1.5V batteries (not included)
Data Transfer: Bluetooth and WiFi
GETTING STARTED
BATTERY INSTALLATION
- Open the battery compartment.
- Install 3 AAA 1.5V batteries with the polarity shown in the diagram.
- Close the battery compartment.
FEATURES
- Smartphone sync for weight and body composition tracking.
- Compatible with health apps.
- Connect up to 8 users.
CARE INSTRUCTIONS
- Spot clean only. Wipe with a soft, damp cloth as needed.
- Do not immerse in water.
- Do not use detergent or soap when cleaning.
HOW TO USE
- The increase from the last measurement
- The decrease from last measurement
- No change from the last measurement
-
Make sure the scale is placed on a hard, flat surface.
-
Open the Scale app to enter your user dashboard.
Note: Press the profile icon on the upper left to switch or add users (Figure E). -
To turn on body fat calculations in the app, click the gear icon, Preference and then Body Fat Calculation. Toggle on Body Fat Calculation (Figure F, G, H, I, J).
-
Step on the scale to wake it from sleep mode and then step off the scale when the numbers appear.
-
Wait for the scale to display “CAL’ and then ‘0.0’ or’0.00” before stepping back on the scale.
-
Carefully step onto the scale to measure your weight.
-
In the Scale app, click the Weight box to enter Weight Management. You can review detailed information and track changes over time (Figure J).
SETUP
-
Press the KG/LB toggle switch button to choose the display units (lbs. or kg) and then place the scale on a hard, flat surface.
-
Download and install the Sharper Image® Scale app on your smartphone. Scan the below OR code or search ‘Sharper Image Scale’ on the App Store or Google Play (Figure A).
-
Enable Bluetooth on your smartphone. For iOS 13 and later, go to settings, scroll to the Sharper Image Scale app and turn on Bluetooth permissions for the app. For Android 6.0 and later, ensure location services are enabled.
-
Open the Scale app, select Sign Up and input your info (Figure B).
Note: Accurate information is required to calculate your BMI and body composition. -
Pair the scale with your smartphone by clicking the gear icon and then Manage Devices. Step on the scale and then click the scale name. Stay on the scale until connected (Figure C, D).
-
Next, click Configure Wi-Fi and then select your Wi-Fi network and input your Wi-Fi password.
Note: Your Wi-Fi network must be visible to connect to Wi-Fi. -
Click the back arrows on the upper left to return to your user dashboard.
https://down.qnclouds.com/?id=c0479fcb
TROUBLESHOOTING
DISPLAY MESSAGES
- If the display does not turn on or to” is displayed, replace the batteries.
- If ‘Overload shows: Err (Error)’ is displayed, make sure the scale is not overloaded. The maximum weight capacity is 396 lbs (180 kg).
- If “CAL” is displayed, the scale is calibrated. Wait for calibration to finish. Reposition the scale if necessary.
- If you suspect the measured weight may be incorrect, make sure the scale is on a hard, flat surface and recalibrate the scale before use.
Note: BMI and body composition are calculated based on user-supplied information and measured weight. This scale is not a medical device and is not intended for supplying information that may impact medical decisions. Consult a physician for any medical or dietary decisions.
SAFETY WARNINGS:
- Not a children’s item. Keep out of reach of children.
- For home use only. Do not expose to moisture or extreme temperatures. Always step carefully and gently onto the scale. Never jump or stomp on the scale.
- Do not exceed the max capacity of 396 lbs. (180 kg). Before making changes in diet or physical activity levels, consult your primary care physician. BMI and body composition are calculated based on user-supplied information and measured weight.
- This scale is not o medical device and is not intended for supplying information that may impact medical decisions Consult a physician for any medical or dietary decisions.
- Use this scale only for its intended purpose.
- Do not use attachments of any kind.
- This scale has no serviceable components Do not disassemble.
- Thoroughly inspect the scale before every use. If the scale appears worn, frayed/splintered, cracked, or broken in any manner, discontinue use and discard it immediately.
BATTERY WARNINGS:
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
- Alkaline batteries are recommended. Use only the specified voltage.
- Insert batteries using the correct polarity. Always use, replace. and recharge (if applicable) batteries under adult supervision.
- Do not attempt to charge non-rechargeable batteries.
- Do not short-circuit the battery supply terminals.
- Do not dispose of batteries in fire batteries may explode or leak.
- Remove batteries before storing. Recycle or dispose of batteries according to federal, and state. and local laws
This device contains license-exempt transmitters)/receiver(s) that comply with Innovation. Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: 1) This device may not cause interference. 2) This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference thot may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC ID: 2AEVM1015793
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc.
CONGRATULATIONS ON YOUR PURCHASE OF THE SPASTUDIO° DIGITAL SCALE.
Please read all instructions and warnings prior to use. Keep this manual as it
contains important information for future reference.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc., registered in
the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google LLC.
SHARPER IMAGE® NAME AND LOGOS (INCLUDING THE 77 LOGO, TOMORROW’S TOMORROW, AND
SPASTUDIO) ARE TRADEMARKS OR REGISTERED TRADEMARKS. DISTRIBUTED BY AND © 2021
MERCHSOURCE, LLC. IRVINE, CA 92618. ALL RIGHTS RESERVED.
FOR CUSTOMER SUPPORT, PLEASE CALL
1-800-374-2744.
MODEL NO.: 1015793
Printed in China.