Pointcinco P3 Bluetooth Headphones User Guide

Pointcinco P3 Bluetooth Headphones

 IN THE BOX

 POWER ON CONNECT

• Press and hold the MFB button for about 2 seconds to power on the headphones and it will automatically enter pairing mode.
  

• Turn on Bluetooth on your device to search “P3”. and click “P3” to connect.
  

 Control

?| ● Single click the “+” to turn up volume.
Press and hold the “+” to next track.
---|---
| ● Single click the “-” to turn down volume.
 Press and hold the “-” to previous track.
●| ● Press and hold the MFB to power on and power of.
 Single click the MFB to play/ pause music and answer/end a phone call.
 Press and hold the MFB for about 3 seconds to reject incoming calls.
 Click the MFB TWICE to activate Siri and voice assistance.

 NOISE CANCELLING

ANC ON
blocks out external sounds
Transparency
lets in external sounds
ANC OFF
turn off noise cancellation and transparency

 MULTI-POINT CONNECTION

1. Connected with the first device, then TURN OFF the bluetooth on your first device, and the headphones will enter to pairing mode
2. Turn on the Bluetooth on your SECOND device, search and connect with “P3”.
3. Turn on the Bluetooth on your FIRST device and the headphones will connect with your first device automatically.
   

 CHARGING

Battery High: 100%-80%
Battery Medium: 70%-30%
Battery Low: less than 20%
NOTE: When heard “battery low”, please charging the headphones in time.

 RESET

NOTE: WHEN NEED RESET THE HEADPHONES, PLEASE UNPAIR “P3” ON YOUR DEVICEFIRSTLY AND TURN OFF THE BLUETOOTH ON YOUR DEVICE.

1. Power off the headphones. And then press and hold the MFB for about 5 seconds until the light flashes red and blue.
2. Press and hold “+” and “-” simultaneously for 2 about 10 seconds until the light flashes RED 3 times.
   

WARRANTY

1. 18-month limited warranty.
2. Life time technical support.
3. Get a replacement/refund at no cost if return window closed.
4. Our warranty is additional to the legal rights consumers have buying this product.

Email: service@pointcinco.com
Facebook: @Pointcinco

If you encounter any problems in the use of the product,please feel free to contact us, our professional customer service team will provide you with high- quality solutions.

Please read this manual carefully before use.

Safety warnings
Do not place any naked flame sources, such as lighted candles Dispose of batteries responsibly and be aware of the environmental effects of battery disposal Do not expose the batteries (batteries installed) to excessive heat, such as fire or the like

Warning
To prevent possible hearing damage, do not listen at high volume levels for long periods.
For your own safety, please be aware of your surroundings when using these headphones.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

PMN: Bluetooth Headphones

IC Warning

This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐003 (B)/NMB‐3(B).

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement.
The device can be usedin portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>