AEG IAE64841FB Built-in household User Manual

AEG IAE64841FB Built-in household

Specifications

• Model: IAE64841FB
• Website : aeg.com/register

Product Information
Welcome to AEG! Thank you for choosing our appliance. Below are detailed instructions on how to safely install and use your induction hob.

Installation

Ensure proper installation to prevent any risks of injury or damage to the appliance.

Before Installation

Check the serial number before proceeding with the installation process.

Built-in Cooking Sections

Follow the recommended minimum distances for installation to ensure proper ventilation.

Product Description

Overview of Cooking Surface

The induction hob consists of various cooking zones and a control panel for easy operation.

Quick Start Guide

Using the Display
Familiarize yourself with the display functions to navigate through different settings.

Menu Structure
Understand the menu options available for customizing your cooking experience.

Daily Use

Activation and Deactivation
Learn how to safely activate and deactivate the hob for regular use.

Using the Cooking Zones
Utilize different heat levels on the cooking zones as per your cooking requirements.

PowerBoost
Enhance cooking speed with the PowerBoost function on selected zones.

Additional Features

OptiHeat Control
Monitor residual heat with the 3-step indicator to ensure safety.

Timer
Set timers for individual cooking zones for precise cooking durations.

Frequently Asked Questions

Q: What materials are suitable for cooking on the induction hob.
A: Use cookware suitable for induction hobs.

“`

1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety · This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children of less than 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
24 ENGLISH

· Children should be supervised to ensure that they do not play with the appliance.
· Keep all packaging away from children and dispose of it appropriately.
· WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down.
· If the appliance has a child safety device, it should be activated.
· Children shall not carry out cleaning and user maintenance of the appliance without supervision.
1.2 General Safety · This appliance is for cooking purposes only. · This appliance is designed for single household domestic
use in an indoor environment. · This appliance may be used in offices, hotel guest rooms,
bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels. · WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. · WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. · Smoke is an indication of overheating. Never use water to extinguish the cooking fire. Switch off the appliance and cover flames with e.g. a fire blanket or lid. · WARNING: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility. · CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. · WARNING: Danger of fire: Do not store items on the cooking surfaces.
ENGLISH 25

· Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
· Do not use the appliance before installing it in the built-in structure.
· Do not use a steam cleaner to clean the appliance. · After use, switch off the hob element by its control and do
not rely on the pan detector. · If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply. In either case contact the Authorised Service Centre. · If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard. · WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.

2. SAFETY INSTRUCTIONS

2.1 Installation
WARNING! Only a qualified person must install this appliance.
WARNING! Risk of injury or damage to the appliance.
· Remove all the packaging. · Do not install or use a damaged
appliance. · Follow the installation instructions supplied
with the appliance. · Keep the minimum distance from other
appliances and units.

· Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
· Seal the cut surfaces of the cabinet with a sealant to prevent moisture from causing swelling.
· Protect the bottom of the appliance from steam and moisture.
· Do not install the appliance next to a door or under a window. This prevents hot cookware from falling from the appliance when the door or the window is opened.
· Each appliance has cooling fans on the bottom.
· If the appliance is installed above a drawer:

26 ENGLISH

­ Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system.
­ Keep a distance of minimum 2 cm between the bottom of the appliance and parts stored in the drawer.
· Remove any separator panels installed in the cabinet below the appliance.
2.2 Electrical Connection
WARNING!
Risk of fire and electric shock.
· All electrical connections should be made by a qualified electrician.
· The appliance must be earthed. · Before carrying out any operation make
sure that the appliance is disconnected from the power supply. · Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. · Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot. · Use the correct electricity mains cable. · Do not let the electricity mains cable tangle. · Make sure that a shock protection is installed. · Use the strain relief clamp on the cable. · Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to a socket. · Do not use multi-plug adapters and extension cables. · Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable. · The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. · Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.

· If the mains socket is loose, do not connect the mains plug.
· Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
· Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
· The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
2.3 Use
WARNING!
Risk of injury, burns and electric shock.
· Do not change the specification of this appliance.
· Remove all the packaging, labelling and protective film (if applicable) before first use.
· Make sure that the ventilation openings are not blocked.
· Do not let the appliance stay unattended during operation.
· Set the cooking zone to “off” after each use.
· Do not put cutlery or saucepan lids on the cooking zones. They can become hot.
· Do not operate the appliance with wet hands or when it has contact with water.
· Do not use the appliance as a work surface or as a storage surface.
· If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock.
· Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation.
· When you place food into hot oil, it may splash.
· Do not use aluminum foil or other materials between the cooking surface and the cookware, unless otherwise specified by the manufacturer of this appliance.
· Use only accessories recommended for this appliance by the manufacturer.

ENGLISH 27

WARNING!
Risk of fire and explosion.
· Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
· The vapours that very hot oil releases can cause spontaneous combustion.
· Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
· Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
WARNING!
Risk of damage to the appliance.
· Do not keep hot cookware on the control panel.
· Do not put a hot pan cover on the glass surface of the hob.
· Do not let cookware boil dry. · Be careful not to let objects or cookware
fall on the appliance. The surface can be damaged. · Do not activate the cooking zones with empty cookware or without cookware. · Cookware made of cast iron or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface.
2.4 Care and cleaning
· Clean the appliance regularly to prevent the deterioration of the surface material.

· Switch off the appliance and let it cool down before cleaning.
· Do not use water spray and steam to clean the appliance.
· Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects, unless otherwise specified.
2.5 Service
· To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
· Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
· Contact your local authority for information on how to dispose of the appliance.
· Disconnect the appliance from the mains supply.
· Cut off the mains electrical cable close to the appliance and dispose of it.

3. INSTALLATION
WARNING! Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the information below from the rating plate. The rating plate is on the bottom of the hob.
Serial number ………………………

3.2 Built-in hobs
Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards.
3.3 Connection cable
· The hob is supplied with a connection cable.

28 ENGLISH

· To replace the damaged mains cable, use the cable type: H05V2V2-F which withstands a temperature of 90 °C or higher. Contact an Authorised Service Centre. The connection cable may only be replaced by a qualified electrician.
3.4 Assembly
If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances.

min. min.

min. 28

12 60

min. 500mm

min. 50mm

If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process.

4. PRODUCT DESCRIPTION
4.1 Cooking surface layout

1

1

Find the video tutorial “How to install your AEG Induction Hob – Worktop installation” by typing out the full name indicated in the graphic below.
www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG Induction Hob – Worktop installation
1 Induction cooking zone 2 Control panel

1 1
2

ENGLISH 29

4.2 Control panel layout

1

2

3

45

6

7

8

12

11

To see the available settings touch the appropriate symbol.

10 9

Symbol 1 2 3 45 67 8
9
10 11 0 – 9 12

Comment ON / OFF Menu Zone selection Zone indicator Slider PowerBoost Lock –
Pause Bridge

To activate and deactivate the hob. To open and close the Menu. To open the slider for the selected zone. To show for which zone the slider is active. To set the timer functions. To adjust the heat setting. To activate the function. To activate and deactivate the function. The window of the Hob²Hood infrared signal communicator. Do not cover it. To activate and deactivate the function. To show the current heat setting. To activate and deactivate the function.

5. QUICK GUIDE
5.1 Using the display
· Only the backlit symbols can be used. · To activate a given option, touch the
relevant symbol on the display. · The selected function is activated when
you remove the finger from the display. · To scroll the available options, use a quick
gesture or drag your finger across the

display. The speed of the gesture determines how fast the screen moves. · The scrolling can stop by itself or you can stop it immediately if you touch the display. · You can change most of the parameters shown on the display when you touch the relevant symbols.

30 ENGLISH

· To select the required function or time you can scroll through the list and / or touch the option you want to choose.
· When the hob is activated and some of the symbols disappear from the display, touch it again. All the symbols come back on.
· For certain functions, when you start them, a pop-up window with additional information appears. To deactivate the
pop-up window permanently, check before you activate the function. · Select a zone first to activate the timer functions.
Symbols useful for display navigation
To confirm the selection or setting.

Menu
Assisted Cooking Hob Functions
Settings

PowerSlide Melting
Child Lock
Stopwatch
Hob²Hood

Setup Service

Symbols useful for display navigation To go back / forwards one level in the Menu.
To scroll up / down the instructions on the display.
To activate / deactivate the options.
To close the pop-up window.
To cancel a setting.
5.2 Menu structure
Touch to access and change the settings of the hob or activate some functions. The table shows the basic Menu structure.
H0 – Off H1 – Light only H2 – Fan speed low H3 – Auto Fan Low H4 – Auto Fan Medium H5 – Auto Fan High H6 – Auto Fan Boost Assisted Cooking Language Key Tones Buzzer Volume Display Brightness Demo Mode License Show Software Version Alarm History Reset All Settings

To leave the Menu touch or the right side of the display, outside of the pop- up window.
To navigate through the Menu use or .
When you touch and hold some of the options available in the Menu, a short

description appears. Follow the tips to easily navigate through the Menu.
If you are at the bottom of the Menu scroll the
list up and use or touch to leave the Menu.

ENGLISH 31

6. BEFORE FIRST USE
WARNING! Refer to Safety chapters.
6.1 First connection to the mains
When you connect the hob to the mains you have to set Language, Display Brightness and Buzzer Volume.

You can change the setting in Menu > Settings > Setup. Refer to “Daily use”.

7. DAILY USE

WARNING!
Refer to Safety chapters.
7.1 Activating and deactivating
Touch for 1 second to activate or deactivate the hob.
7.2 Automatic Switch Off
The function deactivates the hob automatically if:
· all cooking zones are deactivated, · you do not set the heat setting after you
activate the hob, · you spill or put something on the control
panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. · the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again. · you use incorrect cookware or there is no cookware on a given zone. The white cooking zone symbol blinks and the induction cooking zone deactivates automatically after 2 minutes. · you do not deactivate a cooking zone or change the heat setting. After some time a message comes on and the hob deactivates. The relation between the heat setting and the time after which the hob deactivates:

Heat setting
1 – 2 3 – 5 6 7 – 9

The hob deactivates after 6 hours 5 hours 4 hours 1.5 hour

When you use Pan Fry the hob deactivates after 1.5 hours. For Sous Vide the hob deactivates after 4 hours.
7.3 Using the cooking zones
Place the cookware in the centre of the selected cooking zone. Induction cooking zones adapt to the dimensions of the bottom of the cookware automatically.
Once you place a pot on the selected cooking zone the hob automatically detects it and the relevant slider appears on the display. The slider is visible for 8 seconds, after that time the display goes back to the main view. To close the slider faster tap the screen outside of the slider area.
When other zones are active the heat setting for the zone you want to use may be limited. Refer to “Power Management”.

32 ENGLISH

Make sure that the pot is suitable for induction hobs. For more information on cookware types refer to “Hints and tips”. Check the size of the pot in “Technical data”.
7.4 Heat setting
1. Activate the hob. 2. Place the pot on the selected cooking
zone. The slider for the active cooking zone appears on the display and is active for 8 seconds. 3. Touch or slide your finger to set the
desired heat setting. The symbol turns red and becomes bigger.
You can also change the heat setting while cooking. Touch the zone selection symbol on the main view of the control panel and move you finger to the left or right (to lower or increase the heat setting).
7.5 PowerBoost
This function activates more power for the appropriate induction cooking zone; it depends on the cookware size. The function can be activated only for a limited period of time. 1. Touch the desired zone symbol first. 2. Touch or slide your finger to the right
to activate the function for the chosen cooking zone. The symbol turns red and becomes bigger. The function deactivates automatically. To deactivate the function manually select the zone and change its heat setting.
For maximum duration values, refer to “Technical data”.

7.6 OptiHeat Control(3 step Residual heat indicator)
WARNING!
III / II / I As long as the indicator is on, there is a risk of burns from residual heat.
The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.
The indicators III / II / I appear when a cooking zone is hot. They show the level of the residual heat for the cooking zones you are currently using.
The indicator may also appear: · for the neighbouring cooking zones even if
you are not using them, · when hot cookware is placed on a cold
cooking zone, · when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking zone has cooled down.
7.7 Timer
+STOP Count Down Timer
Use this function to specify how long a cooking zone should operate during a single cooking session.
You can set the function for each cooking zone separately.
1. Set the heat setting for the appropriate cooking zone first and then set the function.
2. Touch the zone symbol. 3. Touch . The timer menu window appears on the display.
4. Check to activate the function. The symbols change to +STOP . 5. Slide your finger to the left or right to
select the desired time (e.g. hours and/or minutes). 6. Touch OK to confirm your selection.

ENGLISH 33

You can also choose to cancel your selection. When the time comes to an end, a signal
sounds and blinks. Touch to stop the signal.
To deactivate the function set the heat setting
to 0. Alternatively, touch to the left of the timer value, touch next to it and confirm your choice when a pop-up window appears.
Minute Minder
You can use this function when the hob is activated but the cooking zones do not operate.
The function has no effect on the operation of the cooking zones.
1. Select any cooking zone. The relevant slider appears on the display.
2. Touch . The timer menu window appears on the display. 3. Slide your finger to the left or right to
select the desired time (e.g. hours and minutes). 4. Touch OK to confirm your selection. You can also choose to cancel your selection. When the time comes to an end, a signal
sounds and blinks. Touch to stop the signal.
To deactivate the function touch to the left
of the timer value, touch next to it and confirm your choice when a pop-up window appears.

The function does not stop when you lift the pot. To reset the function and start it again
manually touch , select Reset from the popup window. The function starts counting from 0. To Pause the function for one cooking
session touch and select Pause from the pop-up window. Select Start to continue counting.
7.8 Bridge function
This function connects two cooking zones and they operate as one with the same heat setting.
You can use the function with large cookware.
1. Place the cookware on two cooking zones. The cookware must cover the centres of both zones.
2. Touch to activate the function. The zone symbol changes.
3. Set the heat setting. The cookware must cover the centres of both zones but not go beyond the area marking.

Stopwatch
The function automatically starts counting immediately after you activate a cooking zone. You can use this function to monitor how long it operates.
1. Touch to access the Menu. 2. Scroll the Menu to select Settings >
Stopwatch. 3. Touch the switch to turn the function on /
off.

To deactivate the function, touch . The cooking zones operate independently.
7.9 Pause
This function sets all cooking zones that operate to the lowest heat setting.

34 ENGLISH

When the function operates only and symbols can be used. All other symbols on the control panel are locked.
The function does not stop the timer functions.
Touch to activate the function.
comes on. The heat setting is lowered to 1.
To deactivate the function touch .
The function stops PowerBoost. The highest
heat setting reactivates when you touch again.

7.10 Lock
You can lock the control panel while the hob operates. It prevents an accidental change of the heat setting.
Set the heat setting first.

Touch to activate the function.
To deactivate the function, touch seconds.

for 3

When you deactivate the hob, you also deactivate this function.
7.11 Child Lock
This function prevents an accidental operation of the hob.
1. Touch on the display to open the Menu.
2. Select Settings > Child Lock from the list. 3. Turn the switch on and touch the letters
A-O-X in the alphabetical order to activate the function. To deactivate the function turn the switch off.
To leave the Menu, touch or the right side of the display, outside of the pop- up window.
To navigate through the Menu, use or .
7.12 Assisted Cooking
This function adjusts the temperature to different types of food and maintains it throughout cooking. It can only be activated

for the left front cooking zone or both zones on the left when bridged.
1. Touch on the display to open the Menu.
2. Select Assisted Cooking and choose the type of food you would like to prepare from the list. For each type of food there are a few options available. Follow the instructions shown on the display. · You can touch OK on top of the popup window to use the default settings. · You can set the timer function. When the pot reaches the intended temperature you can activate the timer. · You can change the default heat level.
3. Once the pot reaches the intended temperature an acoustic signal sounds and a pop-up window appears. To close the window and start the function touch OK. To deactivate the window
permanently check before you activate the function.
To stop the function touch and Stop or
touch and select Assisted Cooking, choose any type of food and touch Stop.
To leave the Menu touch or the right side of the display, outside of the pop- up window.
To navigate through the Menu use or .
7.13 Melting
You can use this function to melt different products, e.g. chocolate or butter. You can use the function only for one cooking zone at a time.
1. Touch on the display to open the Menu.
2. Select Hob Functions > Melting from the list.
3. Touch Start. You need to select the desired cooking zone. If the cooking zone is already active a pop-up window appears. Cancel the previous heat setting to activate the function.

ENGLISH 35

To leave the Menu, touch or the right side of the display, outside of the pop- up window.
To navigate through the Menu, use or .
To stop the function, touch the zone selection symbol and then touch Stop.
7.14 Hob²Hood
It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. The speed of the fan is defined automatically on the basis of the mode setting and the temperature of the hottest pot on the hob.
For most of the hoods the remote system is originally deactivated. Activate it before you use the function. For more information refer to the hood user manual.
To operate the function automatically, set the automatic mode to H1 – H6. The hob is originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes the temperature of the cookware automatically and adjusts the speed of the fan. You can set the hob to activate only the light by selecting H1.

If you change the fan speed on the hood, the default connection with the hob is deactivated. To reactivate the function, turn both appliances OFF and ON again.

Mode Auto- matic light

H0

Off

H1

On

H23) On

H3

On

H4

On

H5

On

Boiling1)
Off Off Fan speed 1 Off Fan speed 1 Fan speed 1

Frying2)
Off Off Fan speed 1 Fan speed 1 Fan speed 1 Fan speed 2

Mode Auto- matic light

Boiling1)

Frying2)

H6

On

Fan speed 2 Fan speed 3

1. The hob detects the boiling process and activates fan speed in accordance with the automatic mode. 2) The hob detects the frying process and activates fan speed in accordance with the automatic mode. 3) This mode activates the fan and the light and does not rely on the temperature.

Changing the modes
If you are not satisfied with the noise level / fan speed, you can switch between modes manually.
1. Touch . Select Settings > Hob²Hood from the list. 2. Choose the appropriate mode.
To leave the Menu touch or the right side of the display, outside of the pop- up window.
When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from an accidental activation for the next 30 seconds.
The light on the hood deactivates 2 minutes after deactivating the hob.
7.15 Language

1. Touch on the display to open the Menu.
2. Select Settings > Setup > Language from the list.
3. Choose the appropriate language from the list.
If you chose the wrong language, touch . A list appears. Select the third option from the top, then the last but one option. Next, select the second option. Scroll down to choose the appropriate language from the list. Finally, choose the option on the right.
To leave the Menu, touch or the right side of the display, outside of the pop- up window.
To navigate through the Menu, use or .

36 ENGLISH

7.16 Key Tones / Buzzer Volume
You can choose the type of sound your hob emits or turn the sounds off entirely. You can choose between the click (default) or beep.
1. Touch on the display to open the Menu.
2. Select Settings > Setup > Key Tones / Buzzer Volume from the list.
3. Choose the appropriate option. To leave the Menu, touch or the right side of the display, outside of the pop-up window.
To navigate through the Menu, use or .
7.17 Display Brightness
You can change the brightness of the display.
There are 4 brightness levels, 1 is the lowest and 4 is the highest.
1. Touch on the display to open the Menu.
2. Select Settings > Setup > Display Brightness from the list.
3. Choose the appropriate level. To leave the Menu, touch or the right side of the display, outside of the pop-up window.
To navigate through the Menu, use or .
7.18 Power Management
If multiple zones are active and the consumed power exceeds the limitation of the

power supply, this function divides the available power between all cooking zones. The hob controls heat settings to protect the fuses of the house installation.
· Cooking zones are grouped according to the location and number of the phases in the hob. Each phase has a maximum electricity loading of 3680 W. If the hob reaches the limit of maximum available power within one phase, the power of the cooking zones will be automatically reduced.
· The maximum heat setting is visible on the slider. Only the digits in white are active.
· If a higher heat setting is not available reduce it for the other cooking zones first.
Refer to the illustration for possible combinations in which power can be distributed among the cooking zones.

8. HINTS AND TIPS

WARNING! Refer to Safety chapters.
8.1 Cookware
For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with suitable cookware.

· The bottom of the cookware must be as thick and flat as possible.
· Ensure pan bases are clean and dry before placing on the hob surface.
· In order to avoid scratches, do not slide or rub the pot across the ceramic glass.
Cookware material
· correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a correct marking from a manufacturer).
· not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is suitable for an induction hob if:

ENGLISH 37

· water boils very quickly on a zone set to the highest heat setting.
· a magnet pulls on to the bottom of the cookware.
Cookware dimensions · Induction cooking zones adapt to the
dimension of the bottom of the cookware automatically. · The cooking zone efficiency is related to the diameter of the cookware. The cookware with a diameter smaller than the minimum receives only a part of the power generated by the cooking zone. · For both safety reasons and optimal cooking results, do not use cookware larger than indicated in “Cooking zones specification”. Avoid keeping cookware close to the control panel during the cooking session. This might impact the functioning of the control panel or accidentally activate hob functions.
Refer to “Technical data”.
8.2 Correct pans for Pan Fry function
Use only pans with flat bottom. To check if the pan is correct: 1. Put your pan upside down. 2. Put a ruler on the bottom of the pan. 3. Try to put a coin of 1, 2 or 5 Euro Cent (or
with similar thickness) between the ruler and the bottom of the pan.
a. The pan is incorrect if you can put the coin between the ruler and the pan.

b. The pan is correct if you cannot put the coin between the ruler and the pan.
8.3 The noises during operation
If you can hear: · crack noise: cookware is made of different
materials (a sandwich construction). · whistle sound: you use a cooking zone
with a high power level and the cookware is made of different materials (a sandwich construction). · humming: you use a high power level. · clicking: electric switching occurs, the pot is detected after you place it on the hob. · hissing, buzzing: the fan operates. The noises are normal and do not indicate any malfunction.
8.4 Öko Timer (Eco Timer)
To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation.
8.5 Examples of cooking applications
The correlation between the heat setting of a zone and its consumption of power is not linear. When you increase the heat setting, it is not proportional to the increase of the consumption of power. It means that a cooking zone with the medium heat setting uses less than a half of its power.

The data in the table is for guidance only.

38 ENGLISH

Heat setting 1 1 – 2 1 – 2 2 – 3
3 – 4 4 – 5 4 – 5 6 – 7
7 – 8 9

Use to:

Time (min)

Hints

Keep cooked food warm.

as neces- Put a lid on the cookware. sary

Hollandaise sauce, melt: butter, choco- 5 – 25 late, gelatine.

Mix from time to time.

Solidify: fluffy omelettes, baked eggs. 10 – 40

Cook with a lid on.

Simmer rice and milkbased dishes, heat up ready-cooked meals.

25 – 50

Add at least twice as much liquid as rice, mix milk dishes halfway through the procedure.

Steam vegetables, fish, meat.

20 – 45

Add a couple of tablespoons of liquid.

Steam potatoes.

20 – 60

Use max. ¼ l of water for 750 g of po- tatoes.

Cook larger quantities of food, stews and soups.

60 – 150

Up to 3 l of liquid plus ingredients.

Gentle fry: escalope, veal cordon bleu, as neces- Turn halfway through. cutlets, rissoles, sausages, liver, roux, sary eggs, pancakes, doughnuts.

Heavy fry, hash browns, loin steaks, steaks.

5 – 15

Turn halfway through.

Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. PowerBoost is activated.

8.6 Hints and Tips for Hob²Hood
When you operate the hob with the function:
· Protect the hood panel from direct sunlight.
· Do not spot halogen light on the hood panel.
· Do not cover the hob control panel. · Do not interrupt the signal between the
hob and the hood (e.g. with the hand, a cookware handle or a tall pot). See the picture. The hood in the picture is only exemplary.

Keep the window of the Hob²Hood infrared signal communicator clean.

ENGLISH 39

Other remotely controlled appliances may block the signal. Do not use any such appliances near to the hob while Hob²Hood is on.

Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work
with this function must have the symbol .

9. CARE AND CLEANING
WARNING! Refer to Safety chapters.
9.1 General information
· Clean the hob after each use. · Always use cookware with a clean base. · Scratches or dark stains on the surface
have no effect on how the hob operates. · Use a special cleaner suitable for the
surface of the hob. · Use a special scraper for the glass.
9.2 Cleaning the hob
· Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a

special hob scraper on the glass surface at an acute angle and move the blade on the surface. · Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a nonabrasive detergent. After cleaning, wipe the hob dry with a soft cloth. · Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth. · The surface of the hob has horizontal grooves. Clean the hob with a moist cloth and some detergent with smooth movement from left to right. After cleaning, wipe the hob dry with a soft cloth from left to right.

10. TROUBLESHOOTING

WARNING! Refer to Safety chapters.
10.1 What to do if…

Problem
You cannot activate or operate the hob.

Possible cause

Remedy

The hob is not connected to an elec- Check if the hob is correctly connec-

trical supply or it is connected incor- ted to the electrical supply. Refer to

rectly.

the connection diagram.

The fuse is blown.

Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.

You do not set the heat setting for 60 seconds.

Activate the hob again and set the heat setting in less than 60 seconds.

40 ENGLISH

Problem

Possible cause

Remedy

You touched 2 or more sensor fields Touch only one sensor field. at the same time.

Pause operates.

Refer to “Daily use”.

The display does not react to the touch.

Part of the display is covered or the pots are placed too near to the dis- play. There is some liquid or an object on the display.

Remove the objects. Move the pots away from the display. Clean the display, wait until the ap- pliance is cold. Disconnect the hob from the electrical supply. After 1 min, connect the hob again.

An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactivated.

You put something on one or more sensor fields.

Remove the object from the sensor fields.

The hob deactivates.

You put something on the sensor field .

Remove the object from the sensor field.

Residual heat indicator does not come on.

The zone is not hot because it oper- ated only for a short time or the sen- sor under the hob surface is dam- aged.

If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre.

You cannot activate the highest heat Another zone is already set to the

setting.

highest heat setting.

First reduce the power of the other zone.

The sensor fields become hot.

The cookware is too large or you put Put large cookware on the rear

it too near to the controls.

zones, if possible.

Hob²Hood does not work.

You covered the control panel.

Remove the object from the control panel.

Hob²Hood operates, but only the light is on.

You activated the H1 mode.

Change the mode to H2 – H6 or wait until the automatic mode starts.

Hob²Hood modes H1 – H6 operate, There might be a problem with the Contact an Authorised Service Cen-

but the light is off.

light bulb.

tre.

There is no sound when you touch The sounds are deactivated. the panel sensor fields.

Activate the sounds. Refer to “Daily use”.

Wrong language is set.

You changed the language by mis- take.

Reset all functions to the factory set- tings. Select Reset All Settings from the Menu. Disconnect the hob from the electri- cal supply. After 1 min, connect the hob again. Set Language, Display Brightness and Buzzer Volume.

A cooking zone deactivates. A warning message saying the cooking zone is going to switch off comes on.

Automatic Switch Off deactivates the cooking zone.

Deactivate the hob and activate it again. Refer to “Daily use”.

and a message come on.

Lock operates.

Refer to “Daily use”.

O – X – A appears.

Child Lock operates.

Refer to “Daily use”.

ENGLISH 41

Problem blinks.
and a number come on.
You can hear a constant beep noise. Cookware heats up longer than 5 min.

Possible cause There is no cookware on the zone.

Remedy Put cookware on the zone.

The cookware is unsuitable.
The diameter of the bottom of the cookware is too small for the zone. PowerSlide operates. Two pots are placed on the flexible induction cooking area. There is an error in the hob.
The electrical connection is incor- rect.
The bottom of the cookware is not induction compatible.

Use suitable cookware. Refer to “Hints and tips”.
Use cookware with correct dimen- sions. Refer to “Technical data”.
Use only one pot. Refer to “Flexible induction cooking area”.
Deactivate the hob and activate it
again after 30 seconds. If comes on again, disconnect the hob from the electrical supply. After 30 sec- onds, connect the hob again. If the problem continues, speak to an Au- thorised Service Centre.
Disconnect the hob from the electri- cal supply. Ask a qualified electri- cian to check the installation.
Use cookware with correct (flat, magnetic) bottom. Refer to “Hints and tips”.

10.2 If you cannot find a solution…
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Make sure, you operated the hob correctly. If not the servicing by a service

technician or dealer will not be free of charge, also during the warranty period. The information about guarantee period and Authorised Service Centres are in the guarantee booklet.

11. TECHNICAL DATA
11.1 Rating plate

Model IAE64841FB Typ 61 B4A 01 CA Induction 7.35 kW Ser.Nr. …………….. AEG
11.2 Software Licences
The software included in the hob contains copyrighted software that is licensed under the BSD, fontconfig, FTL, GPL-2.0, LGPL-2.0, LGPL-2.1, libJpeg, zLib/ libpng,

PNC 949 597 620 00 220 – 240 V / 400 V 2N 50 – 60 Hz Made in: Germany 7.35 kW
MIT, OpenSSL / SSLEAY ISC, Apache 2.0 and others. Check the full copy of the licence in: Menu > Settings > Service > License.

42 ENGLISH

You can download the source code of the open source software by following the hyperlink present in the web product page.
11.3 Cooking zones specification

Cooking zone
Left front Left rear Right front Right rear

Nominal power (maximum heat setting) [W] 2300 2300 1400 1800

PowerBoost [W] PowerBoost maximum dura- tion [min]

3200

10

3200

10

2500

4

2800

10

Cookware diame- ter [mm] 125 – 210 125 – 210 125 – 145 145 – 180

The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.

For optimal cooking results use cookware no larger than the diameter in the table.

12. ENERGY EFFICIENCY
12.1 Product information*

Model identification Type of hob Number of cooking zones Heating technology Diameter of circular cooking zones (Ø)
Energy consumption per cooking zone (EC electric cooking)
Energy consumption of the hob (EC electric hob)

• For European Union according to EU 66/2014. For Belarus according to STB 2477-2017, Annex A. For Ukraine according to 742/2019. EN 60350-2 – Household electric cooking appliances – Part 2: Hobs – Methods for measuring performance

Left front Left rear Right front Right rear
Left front Left rear Right front Right rear

IAE64841FB
Built-In Hob
4
Induction
21.0 cm 21.0 cm 14.5 cm 18.0 cm
188.9 Wh / kg 188.9 Wh / kg 183.4 Wh / kg 178.8 Wh / kg
185.0 Wh / kg

The energy measurements referring to the cooking area are identified by the markings of the respective cooking zones.
12.2 Energy saving
You can save energy during everyday cooking if you follow below hints.
· When you heat up water, use only the amount you need.

ENGLISH 43

· If it is possible, always put the lids on the cookware.
· Before you activate the cooking zone put the cookware on it.
· Put the smaller cookware on the smaller cooking zones.

· Put the cookware directly in the centre of the cooking zone.
· Use the residual heat to keep the food warm or to melt it.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

References

• Welcome to AEG

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>