Matchmaster 14MM-DTM2 TV Reception Systems Instruction Manual

Matchmaster 14MM-DTM2 TV Reception Systems

Specifications

• Source input: 1 HDMI
• Input Channel: HDMI
• Video System: H.264 Baseline Profile Level 4.0
• Audio System: MPEG-2 / AAC
• Compression Video: H.264 Baseline Profile Level 4.0
• Video Resolution: 1080p 25 / 30 Max
• Video Bit Rate: Max 18Mbps
• Audio: MPEG-2 / AAC
• Audio Bit Rate: 192 Kbit/s
• RF Output Type: DVB-T RF output
• RF Output Frequency: 75 ohm RF Combiner
• Power Supply: 12V Adaptor
• Display Configuration: LCD panel @ 2 x 16 characters (on front panel)
• Environmental for operating: Temperature range, Relative Humidity

Product Usage Instructions

Installation

1. Connect the external power supply to the 100~230V mains.
2. Connect the 12V power supply to the instrument input.
3. The device will turn on and take approximately 37 seconds to become operational.
4. A message “Keyboard Locked” will appear on the display once operational.

Operation via external power supply

Only use the external power adapter supplied with the instrument for operation.

Connection

1. TV with DVB-T built-in or DVB-T STB
2. RF Combiner
3. HDMI Out (4K Pass Through)
4. HDMI In (Media Device)
5. USB (S/W update)
6. DC 12V

Attention: Use output frequencies different from those currently used by your TV for this configuration.

Navigation and Edition of Values

• The instrument is configured through its 6 keys and front panel display. Generally, it is not necessary to configure the instrument to generate a DVB-T signal compatible with any digital terrestrial television receiver.

Frequently Asked Questions (FAQ)

Q: How do I update the software of the 14MM-DTM2 modulator?

• A: You can update the software via the USB port using the provided update files. Simply connect a USB drive with the update files to the USB port on the device and follow the on-screen instructions to update the software.

GENERAL

Description

• The 14MM-DTM2 modulator can generate a signal in DVB-T format (Digital Terrestrial Television) from HDMI input.
• 14MM-DTM2 is an H.264 encoding, DVB-T modulator device to convert 4K Pass FHD HDMI signal to DVB-T RF out. The DTM2 is equipped with one HDMI input, one HDMI out(with 4K pass-through), and one DVB-T RF out.
• The 14MM-DTM2 module automatically adjusts the compression rate to the available Bandwidth using the modulation DVB-T parameters.

Specifications

Source input

Input Channel| 1
Video| HDMI
Video System| 480i/p, 576i/p, 720p, 1080i/p, 4K (3840×2160 or 4096×2160)
Audio System| HDMI
Compression
Video| H.264 Baseline Profile Level 4.0
Video Resolution| 1080p 25 / 30 Max
Video Bit Rate| 18Mbps Max
Audio| MPEG-2 / AAC
Audio Bit Rate| 192 Kbit/s
DVB Insertion Tables| SDT, NIT
Editable Field| Service Name, Network Name, Provider Name, TS ID, Network ID,

Original NET ID, LCN, NIT Version, Private Data, Country

RF Output
Type| 1 Multiplex DVB-T with a digital TV service
Frequency| 177–858 MHz
MER| 30dB Min.
Output level| 100dBµV
RF Level Adj.| 0dB ~ -30dB
Attenuation step| 1dB per step
Connections
HDMI In| HDMI In
HDMI Out| 4K Pass Through
RF Output| 1 DVB-T RF output with type F female, 75 ohm
RF Input| RF Combiner
Modulation| Standard| DVB-T (ETSI EN 300 744)
---|---|---
Constellation| QPSK, 16QAM, 64QAM
Guard Interval| 1/4, 1/8, 1/16, 1/32
Code Rate| 1/2, 2/3, 3/4, 5/6, 7/8
FFT Carriers Mode| 2K, 8K
Bandwidth| 6MHz, 7MHz, 8MHz, 7-8MHz
Power Supply| 12V Adaptor
Display| LCD panel @ 2 x 16 characters (on front panel).
Configuration| 6 Local keys on the front panel:

– ENTER Key: Select parameter, or menu

– L / R Keys: Move menu, or characters

– Up / down: Select the value of the figure or field

– MENU keys: Return to start menu

Environmental for

operating

| Temperature range| 5°C- 40°C
Relative Humidity| 80% @ 30°C

Note

• To be able to see the 4K signal output from the HDMI OUT (HDMI Pass through) port, the specifications requirement of the connected TV is listed below:
• 4K Ultra HD (3840×2160) Resolution
• HDMI 2.0
• HDCP 2.2
• Support 4K50P/60P
• HDMI 2.0 Cable
• Specifications are subject to change without prior notice.

INSTALLATION

Power Supply

• To start using it, connect the external power supply to the 100~230V mains and the 12V to the instrument input.
• Once connected to power, the device turns on and it takes about 37 seconds to be operational. Then the message “Keyboard Locked” appears on the display.

Operation via external power supply

• Use only the external power adapter supplied with the instrument.

Connection

• Connection diagram examples
• Connection diagram for one module

1. TV with DVB-T built-in or DVB-T STB
2. RF Combiner
3. HDMI Out (4K Pass Through)
4. HDMI In (Media Device)
5. USB (S/W update)
6. DC 12V

• ATTENTION! For this configuration, you should use output frequencies different from the ones that your TV is currently using.

Navigation and edition of values.

• The instrument is configured through its 6 keys and front panel display. In general, it is not necessary to configure the instrument to generate a DVB-T signal compatible with any digital terrestrial television receiver.
• Enter Button – Select parameter/menu
• Left/Right Button – Move left/right between menu/characters Up/Down Button – Increase/decrease value of the figure/field Menu Button – Return to start menu

OPERATING INSTRUCTIONS

Description of controls and components

1. Display (LCD).
2. Menu navigation keys.
3. TV COFDM Output.
4. RF Combiner
5. 4K Pass Through
6. HDMI IN
7. USB: S/W update
8. Input 12V DC power adapter (included).

• Note: Display indication
• The resolution of the LCD Display is representative of the video resolution of the RF output.

Please refer to below table:

Starting

1. After connecting the power to the instrument, the message “Initial….” “Please Wait…” appears for 37 seconds.
2. Then the message “Keyboard Locked” appears. To access the configuration menus the user has to enter a password.
3. Press ENTER.
4. The field “Enter Password” appears. Enter the access code. (By default: 0000).
5. Press ENTER.
6. The field “Network Setting” appears, this is the first option on the configuration menu.

Configuration menu

1. Frequency: It sets the frequency value for the output signal.
2. Important: Check that the selected frequency is not already being used by a current television distribution channel.
3. RF Level Adj: It adjusts the power level of the output signal, in dB units. It ranges from 0 to -30 dB.
4. Bandwidth: Channel bandwidth. (6, 7, 8,7-8MHz).
5. FFT Carriers: Signal transmission mode. (2K,8K).
6. Guard Interval: Safety signal margin. (1/4, 1/8, 1/16, 1/32).
7.   Constellation: Constellation type used to transmit signal(QPSK,16QAM, 64QAM).
8. Code Rate: Available values are (1/2, 2/3, 3/4, 5/6, 7/8).
9. Video Output: Video encoding. H.264 of the video output.
10. Audio Output: Audio encoding. Selection between MPEG-2 and AAC
11. Video Bitrate: Select video bit rate(2-18Mbps).
12. Audio Bitrate: Bitrate to encode the audio. Available values are between 192 kbit/s.
13. Service Name: Service name edit.
14. Provider Name: Service provider name edit.
15. Service ID: Service ID edit.
16. LCN: It specifies the index for the service sorting on the digital terrestrial television receiver. Values are between 1 and 999.
17. Country: Country selection for LCN sorting.
18. Original Net ID: Identifier of the original network. It is the number to identify the network from where the signal comes.
19. Network ID: It is the number that identifies the network where the signal is distributed.
20. Network Name: Network name edit.
21. TS ID: It is the transport stream identifier.
22. NIT Version: Network Information Table version. In some countries, it should match with other table versions received from the receiver.
23. Information: It shows the firmware version installed in the instrument. This option is not editable.
24. Apply Setting: It saves the current configuration on the non-volatile memory of the instrument.
25. New Password: It allows the user to change to a new password to access the menu.
26. Load Default: It returns to the default values.

Menu Tree

Estonia, Finland, France, Ireland, Italy, Latvia, Netherlands, New Zealand, Norway, Poland, Portugal,

Slovak, Sweden, UK, Other

2| Original Net ID| 12801|
3| Network ID| 12803|
4| Network Name| Private Network|
5| TS ID| 5001|
6| NIT Version| 28|
CH & Enc Setting| 1| Service Name| Video 1|
2| Provider Name| MMTV|
3| Service ID| 1|
4| LCN| 400| 1~999
5| Video Output| H.264|
6| Audio Output| MPEG-2| AAC/MPEG-2
7| Video Bitrate| 12Mbps| 2~18Mbps
8| Audio Bitrate| 192Kbps|
RF Setting| 1| Frequency| CH28 529.5MHz| 177~857MHz
2| Constellation| 64QAM| QPSK, 16QAM, 64QAM
3| Guard Interval| 1/16| 1/4, 1/8, 1/16, 1/32
4| Code Rate| 3/4| 1/2, 2/3, 3/4, 5/6, 7/8
5| FFT Carrier| 8K| 2K, 8K
6| Bandwidth| 7MHz| 6, 7, 8MHz
7| RF Level Adj.| 00dB| 0dB ~ -30dB
Information| 1| FW APP| 5.1.2.x.xxx.xx.xx.xx|
Load Default| 1| Yes, No|  |
Change Password| 1| 0000|  |
Network Setting|  | Default|
---|---|---|---
Country|  | NEW ZEALAND| NEW ZEALAND LCN
Original Net ID|  | 8746| 8746
Network ID|  | 13313| 13313
Network Name|  | Private Network| Private Network
TS ID|  | 101| 101
NIT Version|  | 28| 28
CH&Enc Setting|  |  |
Service Name|  | HDMI 1| HDMI 1
Provider Name|  | MMTV| MMTV
Service ID|  | 101| 101
LCN|  | 1| 1
Private Data Specifier

Descriptor tag 0x05

|  | 0| 0x00000037
Audio Output|  | MPEG-2| MPEG-2
RF Setting|  |  |
Frequency| CH25| 506.00MHz| 506.00MHz
Constellation|  | 64QAM| 64QAM
Guard Interval|  | 1/16| 1/16
Code Rate|  | 3/4| 3/4
FFT Carrier|  | 8K| 8K
Bandwidth|  | 8MHz| 8MHz
RF Level Adj|  | 30dB| 30dB

• AU SUPPORT 1800 237 425WWW.MATCHMASTER.COM.AU
• NZ SUPPORT 0800 237 425 WWW.MATCHMASTER.CO.NZ

References

• Matchmaster - 4G Ready Digital TV Antenna and Commercial Headend Specialists
• Matchmaster - 4G/5G Ready Digital TV Antenna and Commercial Headend Specialists

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>