Matchmaster 04MM-TB07 Tilt TV Wall Mount Installation Guide
- June 12, 2024
- Matchmaster
Table of Contents
Matchmaster 04MM-TB07 Tilt TV Wall Mount
Parts
Assembly Instructions
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).
04MM-TB07
|
VESA Compatible 200×200 300×200 300×300 400×200 400×300 400×400 600×400 800×400
| 
---|---|---
- Size must be within the range of limit for weight and VESA pattern
