soundcore P40i Noise Cancelling Wireless Earbuds User Guide

soundcore P40i Noise Cancelling Wireless Earbuds

Product Information

Specifications:

• Model: A3955 51005004316 V2
• Product Name: soundcore P40i
• Input: 5V 0.8A
• Output: 5V 0.34A (0.17A per port)
• Playtime: Up to 50 hours (ANC on); Up to 60 hours (ANC off) – varies by volume level and content
• IPX Ratings: IPX4, IPX5, IPX6
• Maximum Output Power: 9dBm
• Frequency Band: 2.4G band (2.402GHz-2.480GHz)

Product Usage Instructions

Wearing Instructions:

1. Select the appropriate ear tip size from XS, S, M, L, or XL.
2. Insert the earbuds into your ears ensuring a comfortable fit.

Powering On & Pairing:

1. Press and hold the power button to turn on the earbuds.
2. Activate Bluetooth on your phone and select “soundcore P40i” to pair.

Charging Instructions:

1. Connect the charging cable to the earbuds’ charging case.
2. A short light indicates charging, while a long light signifies fully charged.
3. The earbuds provide approximately 3 hours of playtime with just a 10-minute charge.

Touch Controls:
The touch controls on the earbuds allow you to switch between different modes like TWS, ANC Transparency, and Mono by following specific touch patterns.

Powering Off:
To power off the earbuds, press and hold the power button for 10 seconds.

FAQ

• Q: What do I do if the earphones get wet?
  A: For IPX4, IPX5, and IPX6 ratings, do not submerge the earphones in water. If they get wet, dry them thoroughly before use.

• Q: How do I reset the earbuds?
  A: To reset the earbuds, press and hold the designated reset button for 10 seconds.

FAQs and more support

For FAQs and more support information, please visit:

Scan to View User Guide

WEARING

POWERING ON & PAIRING

CHARGING

RESET

TOUCH CONTROLS

POWERING OFF

Limited Warranty

18-month limited warranty

• service@soundcore.com

• support.mea@soundcore.com

• (For Middle East and Africa Only) support@anker.com.

• +971 8000320817 (UAE)

• +1 (800) 988 7973 (US/Canada)

• +44 (0) 1604 936200 (UK)

• +49(0)69 9579 7960 (DE)

• 03 4455 7823

• +86 400 0550 036

• +82 02-1661-9246

• +971 529750842 (Middle East & Africa)

• +971 8000320817 (UAE)

• +966 8008500030 (KSA)

• +965 22069086 (Kuwait)

• +20 8000000826 (Egypt)

• +61 3 8331 4800 (Australia)

• +90 (850) 460 14 14 (Türkiye)

• +8 (800) 511-86-23 (Russia)

• +91 18003138831 (India)

• Input: 5V 0.8A

• Output: 5V 0.34A (0.17A per port)

• Playtime (varies by volume level and content): Up to 50 hours (ANC on); Up to 60 hours (ANC off)

• Anker Innovations Limited

  • Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
  • The following importer is the responsible party (contract for EU and UK matters)

• Anker Technology (UK) Limited

  • GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

• Anker Innovations Deutschland GmbH
  Georg-Muche-Strasse 3, 80807 Munich, Germany

  • FCC ID: 2AOKB-A3955
  • IC: 23451-A3955
  • 210-223160

Important Safety Instructions

• • Do not disassemble.
• Keep out of the reach of children. The product contains small parts which may be a choking hazard.
• The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
• Do not use the product in environments with too high or too low temperatures, and never expose the product to strong sunshine or very wet environments.
• Ensure there is no liquid, sweat, or water on the charging port when charging.
• Refer to your user manual for your earphones’ waterproof level and follow the corresponding instructions. ￮ For IPX4: Do not expose earphones to dripping or splashing water.
  • For IPX4, IPX5, and IPX6: Do not submerge earphones in water.

Hearing Safety

• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not turn the volume so high that you’re unable to hear your surroundings.
• Do not use earphones while driving.
• You should use caution or temporarily discontinue use in potentially hazardous situations.

The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs), and other implants. Always maintain a distance of at least 3.94″/10 cm between the product component containing the magnet (earbuds and charging case) and the cardiac pacemaker, implanted defibrillator, or another implant.

Notice
This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.soundcore.com.

• Maximum output power: 9dBm
• Frequency band: 2.4G band (2.402GHz-2.480GHz)
• WPT Operate Frequency: 110KHz-205KHz
• H-Field Strength: 26.29 dBuA/m @3m

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health. This symbol indicates a “separate collection” for all batteries and accumulators. The a danger of explosion if the battery is incorrectly replaced. To reduce the risk of fire, explosion, or leakage of flammable liquid/gas, don’t disassemble, crush, puncture, short external contacts, expose to temperatures above 60°C (140°F), sunshine like, exposure to extremely low air pressure, or dispose of in fire or water. Replace only with specified batteries.

High or low extreme temperatures that a battery can be subjected to during use, storage, or transportation:

• During use: maximum 40℃ (104°F)
• Storage: -20 – 45℃ (-4 – 113°F)
• Transportation: 5 – 35℃ (41 – 95°F)

FCC Statement

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
The highest SAR value reported under this standard during product certification for use next to the head with the minimum separation distance of 0mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.

The following importer is the responsible party.

• Company Name: Fantasia Trading LLC
• Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
• Telephone: +1 (800) 988 7973

IC NOTICE TO CANADIAN USERS
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

Radiation Exposure Statement
This EUT is in compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and has been tested by the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with a minimum distance of 0mm between the radiator and your head. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.

References

• soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
• soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
• soundcore Headphones & Speakers - Hear it, Feel it - soundcore US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>