tp-link T315 Smart Temperature and Humidity Monitor User Guide
- June 1, 2024
- tp-link
Table of Contents
tp-link T315 Smart Temperature and Humidity Monitor
Product Information
Specifications
- Operating Temperature : 0°C (32°F) – 50°C (122°F)
- Connection: Bluetooth
- Battery: 2 x AAA batteries (not included)
- Comfort Level : Default temperatures between 20°C (68°F) – 26°C (78.8°F), humidity between 30% – 60%
Product Usage Instructions
Before You Start
A Tapo Hub is required for operation. Ensure the Tapo Hub is successfully added via the Tapo app.
Power Up Your Monitor
Remove the back panel and insert 2 AAA batteries. The screen will light up.
Set Up Your Monitor
Open the Tapo app, tap the button, select Sensors, and choose your model. Follow the app instructions to complete the setup process.
Test Your Monitor
Take the monitor to your desired location. Ensure the Connection icon on the screen is solid. If no connection icon appears, move it closer to your Tapo Hub.
Place Your Monitor
- Option 1: Place it on a table or shelf.
- Option 2: Attach the non-slip pad to the back and magnetically attach it to metallic surfaces.
- Option 3: Stick it to a clean wall with the included adhesive.
Note: The installation height should not exceed 2 meters.
Caution
Risk of explosion if the battery is replaced by an incorrect type. Operating Temperature: 0°C (32°F) – 50°C (122°F). Keep away from harsh environments with high temperatures or humidity. Do not immerse the vent hole in any liquid. This monitor is designed for lifestyle facilitation and not as a precision measuring tool.
FAQ
- Q : How can I customize the comfort level on the Tapo app?
- A : In the Tapo app, navigate to settings, select Comfort Level, and adjust the temperature and humidity ranges to personalize your comfort level.
- Q : What should I do if the battery level is low?
- A: When the battery level is below 20%, replace the batteries with new ones to ensure the uninterrupted operation of your monitor.
Setup Video
Scan the QR code or visit
https://www.tp-link.com/support/setup-video/#smart-sensors
- 7106510985 REV1.2.0 *Images may differ from actual products.
Appearance
Indicator Icons
Connection
- Blinking: Connecting to a hub
- Solid On: Connected to hub
- Off: No connection
Battery Level
- Battery level < 20%
- Battery level < 5%
Inside Comfort Level
Outside Comfort Level
The default comfort level is temperatures between 20℃ (68℉) – 26℃ (78.8℉) while humidity is between 30% – 60%. You can customize the comfort level on the Tapo app.
Display/Reset Button
-
Single Press
Switch the temperature unit ℃/℉. -
Double Press
Switch the display position of temperature and humidity. -
Press and hold for 5s
Reset your monitor to enter pairing mode.
Before You Start
A Tapo Hub is required. Make sure your Tapo Hub is successfully added via the Tapo app.
Power Up Your Monitor
Remove the back panel and insert the batteries. The screen will light up.
Set Up Your Monitor
Open the Tapo app and tap the button. Select Sensors and then your model. Follow the app instructions to complete the setup.
Test Your Monitor
Take the monitor to your preferred location. Make sure the Connection icon on the screen is solid on. If there is no connection icon, move it closer to your hub.
Place Your Monitor
Option 1:
Place it on a table or a shelf
(The installation height should not be higher than 2 meters.)
Option 2:
Attach the non-slip pad to the back and magnetically attach to metallic
surfaces
Option 3:
Stick to a clean wall with the included adhesive
For technical support, the user guide and more information, please visit https://www.tapo.com/support/
CAUTION
Risk of explosion if the battery is replaced by an incorrect type.
CAUTION
Avoid replacement of a battery with an incorrect type that can defeat a
safeguard. Avoid disposal of a battery in a fire or a hot oven, or
mechanically crushing or cutting off a battery, which can result in an
explosion. Do not leave a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable liquid
or gas; Do not leave a battery subjected to extremely low air pressure that
may result in an explosion or the leakage of flammable liquid or gas.
Operating Temperature: 0℃ (32℉) – 50℃ (122℉)
Please keep it away from harsh environments with high temperatures or high
humidity. Do not immerse the vent hole in any liquid. This monitor is designed
to facilitate a healthy lifestyle, but should not be used as a measuring tool.
Do not ingest battery, Chemical Burn Hazard
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use the device where wireless devices are not allowed.
- Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
- TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU and (EU) 2015/863.
- The original EU Declaration of Conformity may be found at https://www.tapo.com/en/support/ce/
- TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
- The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/ NFor EU/UK Region: Operating Frequency / Nominal Operating Frequency / Max Output Power: 863~865MHz / 863.35MHz / 25mW (e.r.p)
- 863~865MHz / 864.35MHz / 25mW (e.r.p)
- 868~868.6MHz / 868.35MHz / 25mW (e.r.p)
References
- Regulatory Compliance | Tapo
- UKCA | Tapo
- TP-Link Product Support - Wireless Networking Equipment Support