SIDUSAN Mobile Potty Chair Installation Guide
- June 1, 2024
- SIDUSAN
Table of Contents
SIDUSAN Mobile Potty Chair
Installation Instruction
STEP 1
Unboxing
By an unboxing knife to open the box, gently. Avoid damaging accessories in
the box.
Take out the 1 chair frames(left arn1rest), 2 chair frames(Rigot armrest), 3 bucket holder, 4 reinforcing rod, 5 backrest, 6 O/ shaped sieat board, 7 cushion, 8 toilet.
All accessories in the toilet:
- screwdriver (1)
- hexagonal long screw (2)
- cross short screw (3)
- gasket (4)
- seat frame spare plug (5)
- anti slip foot (6)
- toilet brush (7)
STEP 2
Chair frame
The chair frame is preset with two seat heights, and the bucket holder can be
installed to the appropriate height according to one’s own height.
STEP 3
Backrest
Do not tighten the initial installation.
Repeated pre sitting and pre pressing, Tighten the screws one by one, Adjust
the chair frame smoothly, Chair frame bucket rack chair back, Symmetrical
fastening.
STEP 4
Cushion
0-shaped seat plate, Reserve the same distance on both sides, and insert the
white snap into the horizontal bar behind the chair bucket holder.
Cushion, Plastic anti slip surface facing downwards, Insert the 0-ring cover plate.
Installation completed, When using the toilet, You can use it now.
