DWELLNESS DAFwwilKwwg Lead Cleaning Instructions
- June 1, 2024
- DWELLNESS
Table of Contents
DWELLNESS DAFwwilKwwg Lead Cleaning
Specifications
- Product Name: Lead Dust Cleaning Kit
- Supplies Included: 3 buckets, Liquid sugar soap, Cleaning gloves, Disposable microfibre cloths
Product Usage Instructions
Step 1: Prepare Cleaning Solution
- Fill 1 bucket with soapy water following the instructions on the sugar soap label.
- Fill another bucket with clean water.
- Leave the third bucket empty for discards.
Step 2: Cleaning Process
- Wear cleaning gloves before starting the process.
- Wet Cloth 1 in the soapy water and squeeze out excess water into the empty bucket.
- Start at the highest point in the room and work your way down, wiping down surfaces with Cloth 1.
- Squeeze out the dirty water from Cloth 1 into the empty bucket.
- Reapply soapy water to Cloth 1 and repeat until one wall or area is cleaned.
- Change the soapy water every 30 minutes and dispose of it in the toilet, not the sink.
Step 3: Rinsing Process
- Place Cloth 2 into the bucket of clean water and squeeze out excess water into the discard bucket.
- Wipe down the area cleaned with sugar soap water using Cloth2.
- Repeat the rinsing process until the wall or area is thoroughly rinsed.
- Change the clean water every 30 minutes and dispose of it in the toilet, not the sink.
The Three Bucket Method
- HOW TO CLEAN
- LEAD DUST ON
- SOLID SURFACES
Supplies
- 3 buckets
- Liquid sugar soap
- Cleaning gloves
- Disposable microfibre cloths
GET READY
- Fill 1 bucket with soapy water (follow sugar soap label instructions)
- Fill 1 bucket with clean water
- Leave 1 bucket empty for discards
WASH
- Wearing gloves, wet Cloth 1 in the soapy water and squeeze most of the excess into the empty bucket. Starting at the highest point in the room (and working down), wipe down surfaces.
- Squeeze ‘dirty’ water from Cloth 1 into empty bucket.
- Reapply soapy water and repeat until one wall/area is wiped down Change soapy water every 30 minutes (dump into the toilet, not sink).
RINSE
- Place Cloth 2 into clean water and squeeze excess into the discard bucket
- Wipe down area cleaned with sugar soap water; Repeat until the wall/area is rinsed
- Change clean water every 30 minutes (dump into the toilet, not sink)
FAQ
Frequently Asked Questions
- Q: How often should I change the cleaning solution?
-
- A: It is recommended to change the soapy water and clean water every 30 minutes to ensure effective cleaning.
- Q: Can I reuse the microfibre cloths?
- A: It is best to use disposable microfibre cloths for this cleaning process to avoid spreading lead dust. Dispose of them properly after use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>