REGISDESK SG-00-23-12-29 Electric Height Adjustable Desk Instruction Manual

REGISDESK SG-00-23-12-29 Electric Height Adjustable Desk

Product Usage Instructions

Safety Precautions:

• For indoor use only.
• Wear protective gloves during assembly.
• Do not fully tighten bolts until assembly is complete.
• Assemble on a carpeted floor to prevent scratches.
• Ensure clear surroundings before lifting and adjusting height.
• Avoid spraying cleaning solutions on the desk.

Assembly Steps:

1. Insert the extendable bar into the cross-bar.
2. Install lift columns to the cross-bar using M6 x 16mm screws.
3. Connect the side brackets and hooks to the lift column with M6x12 screws.
4. Fix bases to lift columns with M6x16 screws.
5. Fasten the desktop to the frame with M6x12 screws.
6. Insert the sync rod into the motorized lift column and tighten knobs.
7. Adjust the extendable bar to the right position and fasten with screws.
8. Fasten the desktop to the frame fully with M6x12 screws.
9. Insert 3-in-1 screws to secure board components together.

Maintenance:
Regularly check electrical components, keep them dry, and avoid modifying the provided plug. Turn off power before maintenance.

Frequently Asked Questions (FAQ)

• Q: Can I use this desk outdoors?
  A: No, this desk is designed for indoor use only.

• Q: How should I clean the desk?
  A: Avoid spraying cleaning solutions directly on the desk. Use a dry or slightly damp cloth for cleaning.

• Q: What should I do if the desk stops functioning properly?
  A: Turn off the power, check electrical connections, and perform monthly maintenance checks as per the manual instructions.

INSTRUCTIONS

ATTENTION

• Indoor Use: For indoor use only.
• Assembly Safety: Wear protective gloves when assembling.
• Bolt Tightening: Do not fully tighten bolts until assembly is complete.
• Floor Surface: Highly recommend assembling on carpeted floor to prevent scratches.
• Lifting Precaution: Before lifting, ensure clear surroundings and free desk power cord movement during height adjustments.
• Cleaning and Maintenance: Avoid spraying cleaning solutions on the desk; use a dry or slightly damp cloth. Keep electrical components dry, don’t open them, and don’t modify the provided plug. Turn off power before removing the adapter and perform monthly checks to ensure proper desk function.

PART LIST

INSTALLNATION STEPS

STEP 1—STEP 4

Insert the extendable bar to cross-bar.
Do not fix them with screws before finishing the whole frame assembly.

Install lift column to cross-bar (finished in step 1) with 8 pcs of M6 x 16mm screws. (5mm Allen Key)

Connect the side brackets (left & right) and hooks to the lift column with 4 pcs M6x12 screws (5mm Allen Key)

Install and fix 2 bases to lift columns with 8 pcs M6x16 screws.(5mm Allen Key)

STEP 5—STEP 6

Connect and fix the desktop board with 4 pcs of wood pins.
Fasten them with plastic plate and 12pcs M6×12 screws.(5mm Allen Key)

Fasten desktop to the frame with 8 pcs M6x12 screws.(5mm Allen Key)

Holding sync rod with one hand, insert the shaft to the motorized lift column making sure the rod contacts the bumper on the motor shaft.
Loose and extend hex shaft and make it through sync rod transformer then insert it into the lift column fully. (without motor）
Tighten both knobs.

Adjust the extendable to the right position.
Fasten the cross-bar and extendable bar fully with 8 pcs M6x12 screws. (5mm Allen Key)

STEP 9—STEP 12

Fasten the desktop to frame fully by 4 pcs M6x12 screws. (5mm Allen Key)

Overturn the desk and insert 8 pcs 3-in-1 screws to the board-2

Assembly each 2 pcs board-3&4 to the board -2 and fasten them with 8 pcs 3-in-1 nuts. (Screw Driver)

Insert 8 pcs 3-in-1 screws to stroage shelf board.
Assembly stroage shelf board to board-3&4 and fasten them with 8 pcs 3-in-1 nuts. (Screw Driver)

STEP 13—STEP 16

Assembly drawer anti-slip board of the drawer
Fasten them with 8 pcs long screws.

Install the controller to the desktop with 2 pcs M4×12 screws.
Install the AC adapter to the desktop with 2 pcs M4×12 screws.

Plug the cable from the motor to the controller.
Plug the cable from AC adapter to controller.
Plug the power cord to the AC adapter.

Install 2 set drawes.

STEP 17—STEP 20

Connect 2pcs fix tube 1 to the right and left frame.
Fasten them with 4 pcs M6×25 screws.

Connect 4 pcs fix tube 2 to the right and left frame.
Fasten them with 8 pcs M6×25 screws.

Connect top board to the frame.
Fasten them with 4 pcs M6×12 screws.

Put the drawer base to the drawer.

STEP 21—STEP 24

Fix the plastic handles to the drawers and fasten them each with 6 pieces M4×10 screws.

Connect and fasten tie bar 2 to the big drawer with 2 pieces snap fastener 1 and 2.

Connect tie bar 1 and install it correctly to the tie bar 2.

Finished the installnation of storage cabinet.

STEP 25—STEP 26

Connect the bracket-A to the storage cabine with with 4 pcs M5×10 screws.

Connect and fix the storage cabine to the desk frame with bracket-B and 4pcs M5×10 screws.

AFTER SERVICE

Thank you for choosing to purchase our product! We are honored to provide you with outstanding products and services. We deeply appreciate your trust and support, which means a great deal to us.
If you encounter any issues, have questions, or require further assistance while using our product, our dedicated customer support team is available to assist you. Please don’t hesitate to contact us via the following email address:

Email Address: rjyyamazoncs@163.com
Whether your inquiries are related to product usage, maintenance, or any other aspect, we are committed to providing you with the best solutions.
Once again, thank you for your support. We look forward to serving you and ensuring a pleasant and seamless shopping experience.
Wishing you a joyful life and enjoyable use of our product!

CONTROLLER INSTRUCTIONS

LIFT UP OR DROP DOWN

1. When “ ” or “ ” button is long pressed, the desk will move up and down until it is released or reaches the lowest/ highest point.
2. When short press the “ ” or “ ” key, the desk will move a short distance accordingly.

POSITION MEMORY SETTINGS & OPERATION

• 3 POSITIONS MEMORY CAN BE STORED.

1. When moving to a specific position, press “S” until the digital “S-” flashes then press “1/ 2/ 3” button and current height is stored to the corresponding label successfully
2. Short press the”1 /2/ 3″ button the indicator display will show the height of the position memory
3. Long press or double press the”1 /2/ 3″ button and the desk will automatically move to the height accordingly During operation, any button can stop the operation.

ZERO POSITION RESET.
Long press “S” for 3 seconds and wait for the indicator display to show “—” then the desk will automatically move downwards and upwards. After the end, the desk will automatically move to a fixed position and the zero-position successfully reset.

FACTORY RESET
Press and hold “S” + “2” for 5 seconds. when the indicator display shows “CLr” it means that the setting is successfully.

LOCK & UNLOCK SETTING

• Lock: Press and hold “S” + “1” for 5 seconds. when the indicator display shows “L” it means that the setting is locked and cannot be lifted or lowered.
• Unlock: Press and hold “S” + “1” for 5 seconds. when the indicator display shows from “L ” to normal digital display, it means the setting has been unlocked.

TROUBLE SHOOTING

please recon- nect the motor
E02| Motor overcurrent| Press the up or down button again, if it still exists, please replace the motor or reduce the load.
E03| Motor Hall failure| Press the up or down button again, but if it still exists, please check the connection or replace the motor.
E04| Abnormal main power| It cannot be fixed after power failure, replace the power supply.
E05| Abnormal motor current| It cannot be fixed after power failure, replace the power supply.
E06| Motor power device is broken| Please contact customer service department for advice
E08| Temperature warning| Wait for the temperature to cool down.
E09| Motor stall| Press the up or down button again, if it still exists, please replace the motor or reduce the load.
RST| Unexpected power down| Reduce the load or check if the power cable is loose.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>