FARM YARD 2 Panel Base Model Mobile Chicken Coop Extension Module Instruction Manual
- June 1, 2024
- FARM YARD
Table of Contents
Mobile Chicken Coop Extension Module
Assembly Instructions
2 Panel Base Model Mobile Chicken Coop Extension Module
Included in this add-on module:
- 1 x Sheeted Steel Roof Panel
- 2 x Mesh Panels
- 1 x Floor Brace
- 10 x M6 x 50mm
- 4 x M6 x 35mm
- 28 x M6 washers
- 14 x M6 LOCK nuts
If you are retrofitting this extension module to an existing unit:
Please note: This add-on module must be inserted in a middle section of your
existing unit between the front and rear sections – it cannot attach to either
end.
Simply remove the bolts of a middle section join and insert the mesh walls,
roof and floor brace in the same manner as originally assembled. Once the new
section is fixed in the middle, ensure all bolts are snugly tightened (but not
over tightened). 
For initial assembly with 2 Panel base model to make a 3 or 4 panel unit:
Follow the detailed instructions included in your base model and use these
parts as required to assemble the base model into a 3 or 4 panel unit.
NOTE: DO NOT clean your unit with bore water, bleach or any other
chemicals that will affect the rust prevention treatments on the components of
this unit or your warranty will be void 