eufy T2278 L60 Hybrid Robot Vacuum with Self Empty Station User Guide
- June 1, 2024
- Eufy
Table of Contents
QUICK START GUIDE
Robotic Vacuum Cleaner L60 Hybrid SES (T2278)
What’s in the Box
❶ Documents
❷ Self Empty Station and Power Cord
❸ Mopping Module
❹ Main Unit
❺ Detachable Base
*The Self Empty Station comes with the Cleaning Tool and Disposable Dust Bag preinstalled.
Overview
❶ Cleaning start / pause button
❷ Recharge button
❸ 360° Lidar Navigation Sensor
❹ Dust box
❺ Filter
❻ Mopping Module
❼ Disposable dust bag
| Press and hold for 3 seconds to power on or off
Press to pause / finish the current task when working
---|---
| Press to return Robo Vac to the Charging Station
Press to pause the current task when working
Press and hold for 3 seconds to enable or disable Child Safety Lock
| Press and hold simultaneously for 3 seconds to reset the Wi-Fi connection
Get Started
-
Install the Self Empty Station in a location that Robo Vac can easily access. It is recommended to place it against a wall and on a hard, level surface rather than on rugs or carpets. Always keep the Self Empty Station plugged in, otherwise Robo Vac will not automatically return to it. When the Self Empty Station connects to AC power, the LED indicator on it is steady white.
-
Install the detachable base by pressing down both sides of it firmly until you hear a click. Make sure the detachable base is seamlessly connected to the Self Empty Station, otherwise Robo Vac will fail to return to the Self Empty Station smoothly.
-
Remove the foam blocks beside the bumper before use.
-
Attach Robo Vac to the Self Empty Station and turn it on. Fully charge Robo Vac before use. The LED indicator on Robo Vac will be solid white when fully charged.
-
Download the app. Follow the in-app instructions to set up the Wi-Fi connection.https://dl-eufy.eufylife.com/qcdl?flow=eufy
You will be informed once a new firmware version is detected when Robo Vac has been connected to the Internet. Please update the firmware promptly for an optimal user experience. -
Start Quick Mapping in the eufy Clean app, and experience a hassle-free clean powered by Robo Vac. • For more information on how to use the Intelligent Mapping feature, please refer to the Owner’s Manual by scanning the QR code at Customer Service or visiting https://support.eufylife.com.
Cautions
- When Robo Vac has returned to the Self Empty Station, the hair cutting device in the Self Empty Station will automatically turn on. Do not move the Self Empty Station at this time.
- Once you have finished installing the Self Empty Station, do not touch the hair cutting slot on the Self Empty Station.
- Do not flush the main unit with water.
- RoboVac should not be allowed to enter ponding areas.
- Please remove the mopping module when not using the mopping function.
- Do not use the mopping module on carpets or threshold (more than 18mm). If there’re carpets in the room, it is recommended to set up a no-go zone or no-mop zone by App before using Robo Vac.
Warranty
12-Month Limited Warranty for the main unit (including the battery).
24-Month Limited Warranty for the Self Empty Station.
• Not applicable to consumables (rolling brush, side brush, mopping cloth,
Hair Detangling Mechanism, etc.)
This limited warranty provided by the manufacturer does in no way affect a
potential statutory warranty provided by law.
Customer Service
support@eufy.com
www.eufy.com
(US/CA) +1 (800) 994 3056 (UK) +44 (0) 1604 936200
https://rainbowbridge.anker.com/qrscan?key=eufylife&utm_campaign=t227x
For manuals, tutorial videos, FAQs, and more information, please visit: https://support.eufylife.com Or scan the QR code:
For more support phone numbers, please visit: https://support.eufylife.com/s/phonecontactus Or scan the QR code
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>