MOUNTS PRO OMA8601-AU Articulating Full Motion TV Wall Mount Instruction Manual
- June 1, 2024
- MOUNTS PRO
Table of Contents
MOUNTS PRO OMA8601-AU Articulating Full Motion TV Wall Mount
Product Specifications
- Product Name: Full Motion LED, LCD TV Wall Mount
- Model Number: OMA8601
- Max VESA: 800×600
- Max Load Capacity: 60kg (132lbs)
- Mounting Hardware:
- M5x14mm x4
- M6x14mm x4
- E M8x20mm x4
- F M6x30mm x4
- G M8x30mm x4
- H M8x50mm x4
- Spacers:
- Spacer 1 x8
- Spacer 2 x8
- Drilling template x1
- Bubble level x1
Product Usage Instructions
For Concrete Walls:
- Measure and pre-drill 6 holes using the drilling template.
- Insert wall anchors with a hammer.
- Fix the wall plate to the concrete wall using lag bolts and washers.
For Wood Wall Studs:
- Measure and pre-drill 4 holes using the drilling template.
- Fix the wall plate to the stud wall using lag bolts and washers.
Mounting the TV:
- Attach Mounting Brackets to your TV using bolts and washers.
- Hang your TV onto the Wall Plate.
- Tighten the locking screw to secure the TV in place.
Note: Ensure you follow the specific instructions provided in the user manual for proper installation and safety precautions.
Frequently Asked Questions (FAQ):
-
Q: What is the maximum VESA size supported by this wall mount?
A: The maximum VESA size supported is 800×600. -
Q: What is the maximum weight capacity of this wall mount?
A: The maximum weight capacity is 60kg (132lbs).
SAFETY INSTRUCTION
- Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
- CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on wood stud walls, solid concrete walls, or brick walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT:
Ensure that you have received all parts according to the component checklist
before installation. If any parts are missing or faulty, telephone your local
distributor for a replacement.
MAINTENANCE:
Check that the bracket is secure and safe to use at regular intervals (at
least every three months).
What’s In The Box
Hardware
-
1a. Concrete Walls:
Measure and pre-drill 6 holes using the drilling template. Insert wall anchors with a hammer, using lag bolts and washers to fix the wall plate to the concrete wall.
1b. Wood Wall Studs:
Measure and pre-drill 4 holes using the drilling template. Using lag bolts and washers fix the wall plate to the stud wall. -
VESA:
Using bolts and washers, Fix your TV with Mounting Brackets -
Hang your TV onto the Wall Plate, Tighten the locking screw.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>