Brilliant INEB1446GR Wireless Earbuds User Guide
- June 12, 2024
- brilliant
Table of Contents
Brilliant INEB1446GR Wireless Earbuds
Product Information
Product Name: INEB1446GR
What’s in the Box?
- A. 1 pair of earbuds
- B. 1 charging case
- C. 3 Pair of silicon eartips (M size Installed on earbuds)
- D. USB-C® charging cable
- E. 1 quick start guide
1 warranty card
Product Usage Instructions
Charging
-
Step 1: Place your earbuds into the charging case.
Connect the included charging cable to the charging case. -
Step 2: Once fully charged, open the charging case.
Pairing and Connecting
To pair and connect your earbuds:
- Make sure your earbuds are charged and the charging case is open.
- On your device, go to the Bluetooth settings and select the earbuds named “INEB1446GR”.
- Tap on the earbuds to connect.
Note: Removing your earbuds from the charging case will automatically
connect them to the last paired device.
Unpairing and Pairing to a New Device
To unpair your earbuds from the previously connected device and pair them to a
new device:
- With the charging case lid open, remove your earbuds from the case.
- Press and hold each side of the earbuds for 5 seconds to reset the earbuds and unpair them.
- On the new device, go to the Bluetooth settings and select the earbuds named “INEB1446GR”.
- Tap on the earbuds to connect.
Setting Up Your Device
- Step 1: Place your earbuds into the charging case for initial activation and charge your device using the included charging cable.
- Step 2: Once fully charged, open the charging case.
Your earbuds will enter pairing mode automatically. On your smartphone, search for the Bluetooth® device named “INEB1446” and tap to connect.
Powering On/Off and Unpairing
Powering On
Removing your earbuds from the charging case will connect them to the last
paired device.
Powering Off
Placing your earbuds in the charging case and closing the lid will turm off
and disconnect your earbuds from the last paired device.
You may also turn off your earbuds without the charging case by pressing and
holding each side of the earbuds for 5 seconds.
Pairing and Unpairing
To unpair your earbuds from the previously connected device, turn Bluetooth®
off on your device. Place the earbuds in the charging case with the lid open
to pair to a new device.
Functionality
In-Ear Detection
Both earbuds will auto-pause when you remove them from your ears.
-
Tap 1x to Play/Pause
-
Tap 3x for Siri/ Voice Assistant
-
Tap & Hold Left Earbuds 2 seconds to play the previous track
Tap & Hold Right Earbuds 2 seconds to play the next track -
Tap Once to answer an incoming call or to hangup
The Specs
- Model: INEB1446GR
- Speaker Diameter: 0.4″
- Speaker Impedance: 32 0 + 15%
- Sensitivity: 102 + 3 dB at 1 KHz
- Speaker Driver Rating Power: 3 mW
- Charging Cable: 19.69″
- Input: 5V DC=0.5 A
- Battery: 3.7 V, 200 mAh, 1 Wh
- Playback: 5 hours (at 50% volume)
WARNING: Listening to loud audio for extended periods of time may damage your hearing permanently.
Warranty Information
90-day Limited Warranty
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product (including any accessories included in the original packaging) as
supplied and distributed new by ar authorized retailer is warranted by MCG
Innovation Inc. to the original consumer purchaser against defects in
materials and workmanship (“Warranty”) as follows:
To obtain warranty service:
- Visit our website at WWW.MCGINNOVATIONS.COM
- Click on Product Support
- Select the Brand of your device
- Select Service Request and fill out the form to begin your inquiry
Your product will be repaired or replaced, at our option, for the same or
similar model of equa value if examination by the service center determines
this product is defective. Products received damaged as a result of shipping
will require you to file a claim with the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of reasonable care, unauthorized
modification including software modifications such as the installation of
custom firmware This warranty is voided in the even any unauthorized person
opens, alters or repairs this product.
All products being returned to the authorized service center for repair must
be suitably packaged.
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modifications not expressly approved could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Information
This device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>