PRESENT PETS T65300 Interactive Plush Pet Toy

HOW TO INSTALL BATTERIES

1. Turn the puppy OFF. Open the battery doors with a screwdriver (A). If used batteries are present, remove all batteries from the unit by pulling up on one end of each battery. DO NOT remove or install batteries using sharp or metal tools.
2. Install new batteries as shown in the polarity diagram (+/-) inside the battery compartments.
3. Replace battery doors securely. Check your local laws and regulations for correct recycling and/or battery disposal.

POWER ON

To power on, move the power switch to the ON position. Your pup will turn on and be in AUTONOMOUS MODE. It will bark and move around like a real pup.

SLEEP

If you ignore or don’t play with the puppy it will fall asleep and enter SLEEP MODE. Press the button on the back to wake it up.

MODES OF PLAY

1. Pet the head multiple times for PRINCESS/FAIRY MODE
2. Pet/tickle the belly for PUPPY MODE.
3. Hold the back button first and quickly pet the head for an INSTANT TRICK.

ROYAL REPEAT

1. Press the button on the back to play ‘ROYAL REPEAT’ (Princess Pup) or ‘ENCHANTED ECHO’ (Fairy Pup).
2. When the puppy is in this game, it is listening to you
3. When you bark or speak to the puppy, it will respond and imitate you in barks. After three exchanges of speaking and barking back, the puppy will return to AUTONOMOUS MODE.

PRINCESS PROMISES

1. Hold the button on the back to enter ‘PRINCESS PROMISES’ (Princess Pup) or ‘MAGIC MESSAGES’ (Fairy Pup). A chime sound will indicate you are in the game.
2. Puppy starts by barking once and waits for you to copy it by barking back the same number of times. Keep copying the number of barks of the puppy. If you copy the puppy’s barks three times, you win!
3. At any time you can short press the button on the back to exit to AUTONOMOUS MODE.

CARE AND MAINTENANCE

Always remove batteries from the toy when it is not being used for a long period of time. Wipe the toy gently with a clean damp cloth. Keep the toy away from direct heat. Do not submerge the toy in water. This can damage the electronic assemblies.

BATTERY SAFETY INFORMATION

Requires 6 x 1.5 V AAA (LR03) batteries. Batteries are small objects. Replacement of batteries must be done by adults. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the toy. Dispose of used batteries properly. Remove batteries for prolonged storage. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (i.e. alkaline/standard/rechargeable). Using rechargeable batteries is not recommended due to possible reduced performance. Rechargeable batteries are only to be charged under adult supervision. Replaceable- rechargeable batteries are to be removed from the toy before being charged. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference to radio communications. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this toy does cause interference to radio or television reception (you can check this by turning the toy off and on while listening for the interference), one or more of the following measures may be useful:

• Reorient or relocate the receiving antenna.
• Increase the separation between the toy and the radio or the TV.
• Consult the dealer or an experienced TV-radio technician for help

NOTE: Changes, adjustments or modifications to this unit, including but not limited to, replacement of any transmitter component (crystal, semiconductor, etc.) could result in a violation of FCC rules under part 15 and/or 95 and must be expressly approved by Spin Master Ltd. or they could void the user’s authority to operate the equipment. Spin Master Inc., PMB

10053, 300 International Drive, Suite 100, Williamsville, NY 14221. To

contact the responsible party please visit fcc.spinmaster.com

REQUIRES 6 x 1.5V AAA (LR03) ALKALINE BATTERIES (included).
Batteries or battery packs must be recycled or disposed of properly. When this product has reached the end of its useful life, it should not be disposed of with other household waste. The Waste Electrical and Electronic Equipment Regulations require it to be separately collected so that it can be treated using the best available recovery and recycling techniques. This will minimize the impact on the environment and human health from soil and water contamination by any hazardous substances, decrease the resources required to make new products and avoid using up landfill space. Please do your part by keeping this product out of the municipal waste stream! The “wheelie bin” symbol means that it should be collected as “waste electrical and electronic equipment”. You can return an old product to your retailer when you buy a similar new one. For other options, please contact your local council.

References

• patents.spinmaster.com
• Present Pets!
• PresentPets.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>