tp-link Omada MC200CM Gigabit Ethernet Media Converter User Guide

tp-link Omada MC200CM Gigabit Ethernet Media Converter

Package Contents

• Media Converter
• Power Adapter
• User Guide

Note

MC200CM is used as an example throughout this guide. Other models may differ in appearance

Scenario 1

Connect Devices with and without Optical Interfaces

Note
MC220L needs to be plugged in with an SFP module to work normally. It is recommended to use a TP-Link SFP module on MC220L, because other vendors’ SFP modules may be incompatible.

Scenario 2

Connect Devices without Optical Interfaces

Note

1. Either two MC200CM converters or two MC210CS converters can work cooperatively. Two MC220L converters with the same SFP module can work cooperatively.
2. One MC220L can also cooperate with one MC200CM or one MC210CS. However, the mode and wavelength of the SFP module used in MC220L must be the same as the opposite end.
3. Connect the TX port of one converter to the RX port of the other using a fibre cable.

LED Explanation

Specifications

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• The adapter shall be installed near the equipment and shall be easily accessible.
• Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
• Do not point or stare directly into the beam or the optical port of the transceiver when it is operating, as this can injure your eyesight.

EU declaration of conformity
TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp- link.com/en/support/ce/

UK declaration of conformity
TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK Declaration of Conformity may be found at https://www .tp-link.com/support/ukca/

References

• TP-Link Product Support - Wireless Networking Equipment Support
• CE Regulatory Compliance | TP-Link
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>