GUARDIAN ANGEL RC-RF Kayak Light Kit User Manual
- June 1, 2024
- GUARDIAN ANGEL
Table of Contents
Kayak Light Kit
Power ON or Power OFF Device for storage
Power ON
* Option 1 Hold down Front and Rear buttons for 2 seconds
– Work light turns ON
Option 2 -Piug your device in an AC Adapter using USB Cable
– Work light will single flash
+ Double flash when charge is 100%
- Device turns ON at Max brightness
Power OFF - Hold down the Front and Rear buttons for 3 seconds
– Work light flashes 3 times – unit is OFF
Power Saver and Charging
Power Saver
After 2 hrs. if the remote has not been used the device will go into sleep
mode. To take devices out of sleep mode press any button on the device – this
wakes up the device.
Charging (0% – 100%- approx. 1.55 hours)
Open sealed side door of the device and plug in Type-C USB cable.
Charging can be with any USB 1000mA AC adapter used with cell phones.
Note: Work light single flashes when charging Flashes twice when fully
charged.
Step 1- Micros
Fully Charge both Micros
(Rechargeable Battery included)
Step 2 Micros
Turn ON Micros
Press any button
Sten 3 – Remote
Turn Devices ON/OFF
Press GA button
Line of site – Operation Range – 75 ft.
Pro Tip:
Devices are already Paired together – Just turn ON Devices and use the Remote
Control
Adding a New Device? Pairing is needed!
How to Pair a Bow & Stern Lights to a Kayak Remote
Bow Lights
Pro Tip:
Powered OFF and ON
Devices remain PAIRED to remote
Stern Lights
Pro Tip:
After 2 hrs. Lights go into sleep mode.
To take them out of sleep mode press any button on the Light.
Light is awake!
Remote is ready to control Lights.
Model #s: RC-RF and MCR-RF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>