Newport Brass 1400-5462 Chesterfield Bridge Pulldown Faucet Instruction Manual
- June 1, 2024
- NEWPORT BRASS
Table of Contents
BRIDGE PULLDOWN
INSTALLATION INSTRUCTIONS
MODEL : 1400-5462, 1400-5463,1500-5462, 1500-5463, 1030-5462,
1030-5463, 2470-5462, 2470-5463, 2940-5463, 3290-5463
1400-5462 Chesterfield Bridge Pulldown Faucet
INSTALLERS WARNING:
DO NOT CUT PEX SUPPLY LINES.
It is not necessary or prudent to cut the pexsupply lines of this product. Brasstech will not accept product returns for any reason if the supply lines have been cut.
If you have made this mistake, please contact Brasstech customer service at 949-417-5206 for assistance.
Recommended Installation by a Professional Plumbing Contractor
Installer: Do not cut pex supply line. Doing so will void warranty and
expose installer to potential liability.
Note:
A. This product meets the flow rate and performance requirements of the
harmonized Uniform Plumbing Code (cUPC). If your regional requirements vary
from the cUPC, please contact Brasstech Customer Service
(949.417.5207) to discuss conformance options.
B. The use of petroleum base plumbers putty on our products will nullify the
warranty. We recommend the use of clear silicone sealing materials.
Recommended deck hole size for all holes are Ø1-3/8”.
C. If mounting the faucet to a stainless steel rim, an under-mount support,
(e.g. wood, appropriate size x 1/2″ thick), should be utilized.
- Insert the hoses through the side holes and place the SPOUT (1) assembly through holes on deck. Secure SPOUT (1) into place with MOUNTING KIT (2). See Figure 1.
- Connect the HOSE (4) to the TEE CONNECTOR (5) and connect them to the PULLDOWN HOSE (6). Attach HOSE CLIP to the connection between HOSE and PULLDOWN HOSE. See Figure 2.
- Connect the hot /cold hoses with the threaded fitting directly to supply valves in the wall. See Figure. 3
- Connect the HOSES without the threaded fitting into the TEE CONNECTOR (5). See Figure. 4
- Attach WEIGHT to HOSE in the appropriate area shown, on the upward swing toward the SPRAYHEAD, in order to provide proper pull to hose. See Figure 4.
- With faucet in the OFF position, open water supply valves. Inspect connections under sink for leaks. DO NOT turn faucet on yet.
- Pull SPRAYHEAD out from SPOUT. While holding PULLDOWN HOSE, detach SPRAYHEAD. Aiming HOSE into sink, turn on hot and cold seperately and flush for one minute to remove debris from lines.
- Turn OFF faucet and reattach SPRAYHEAD to PULLDOWNHOSE. See Figure 5.
- Check the SPRAYHEAD by operating the trigger from aerator to spray.
NWP-1500-546
2 EN-4650
Rev B
Documents / Resources
|
Newport Brass 1400-5462 Chesterfield Bridge Pulldown
Faucet
[pdf] Instruction Manual
1400-5462 Chesterfield Bridge Pulldown Faucet, 1400-5462, Chesterfield Bridge
Pulldown Faucet, Bridge Pulldown Faucet, Pulldown Faucet, Faucet
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>