NEWPORT BRASS 1400-5462 East Square Kitchen Bridge Pulldown Installation Guide
- May 15, 2024
- NEWPORT BRASS
Table of Contents
Installation Guide
BRIDGE
PULLDOWN
INSTALLATION INSTRUCTIONS
MODEL : 1400-5462, 1400-5463, 1500-5462, 1500-5463, 1030-5462,
1030-5463, 2470-5462, & 2470-5463, 2940-5463, 3290-5463
1400-5462 East Square Kitchen Bridge Pulldown
Recommended Installation by a Professional Plumbing Contractor
Note: The use of petroleum base plumbers putty on our products will
nullify the warranty. We recommend the use of clear silicone sealing
materials. Recommended deck hole size for all holes are Ø1-3/8”. If mounting
faucet to stainless steel rim, an under-mount support, (e.g. wood, appropriate
size x 1/2” thick), should be utilized.
- Insert the hoses through the side holes and place the SPOUT (1) assembly through holes on deck. Secure SPOUT (1) into place with MOUNTING KIT (2). See Figure 1.
- Connect the HOSE (4) to the TEE CONNECTOR (5) and connect them to the PULLDOWN HOSE (6). Attach HOSE CLIP to the connection between HOSE and PULLDOWN HOSE. See Figure 2.
- Connect the hot /cold hoses with the threaded fitting directly to supply valves in the wall. See Figure. 3
- Connect the HOSES without the threaded fitting into the TEE CONNECTOR (5). See Figure. 4
- Attach WEIGHT to HOSE in the appropriate area shown, on the upward swing toward the SPRAYHEAD, in order to provide proper pull to hose. See Figure 4.
- With faucet in the OFF position, open water supply valves. Inspect connections under sink for leaks. DO NOT turn faucet on yet.
- Pull SPRAYHEAD out from SPOUT. While holding PULLDOWN HOSE, detach SPRAYHEAD. Aiming HOSE into sink, turn on hot and cold saperately and flush for one minute to remove debris from lines.
- Turn OFF faucet and reattach SPRAYHEAD to PULLDOWNHOSE. See Figure 5.
- Check the SPRAYHEAD by operating the trigger from aerator to spray.
NWP-1500-5462
EN-4566 Rev A
2001 CARNEGIE AVE, SANTA ANA CA 92705
949-417-5207
WWW.NEWPORTBRASS.COM
References
Read User Manual Online (PDF format)
Loading......