NEWPORT BRASS 3103 Single Hole Lavatory Set Instruction Manual
- May 15, 2024
- NEWPORT BRASS
Table of Contents
INSTALLATION INSTRUCTIONS
SINGLE HOLE LAVATORY SET
MODEL No: 3103
3103 Single Hole Lavatory Set
Recommended Installation by a Professional Plumbing Contractor
Note : The use of petroleum base plumbers putty on our products will
nullify the warranty. We recommend the use of clear silicone sealing
materials. Recommended deck thru holeØ1-1/8”
-
Place the spout hoses, one at a time, and secure spout into place with MOUNTING KIT (1) See Fig. 1
-
Attach hot/cold spout supply hoses to valves in the wall. See Fig. 2
-
Drain assembly installation. Remove drain FLANGE (4) from TAILPIECE (9). Place FLAT WASHER (7) and then FLANGE (4) through sink drain opening. (Clear silicone may be used in place of white washer.) From bottom side of sink, place cone shaped rubber WASHER (5) onto FLANGE (4) and slide up against sink bottom.
Note : Cone portion of WASHER (5) to face upward. Next slide on clear WASHER (6) and secure with flange NUT (8). Place NUT (8) & tighten to FLANGE (4). See Figure 3. -
Apply thread sealant to STOPPER (10) and attach to DRAIN ASSEMBLY (11) See Figure 4.
2001 CARNEGIE AVE, SANTA ANA CA 92705
949-417-5207
WWW.NEWPORTBRASS.COM
NWP-3103
EN-4590 REV. NC
Documents / Resources
|
NEWPORT BRASS 3103 Single Hole Lavatory
Set
[pdf] Instruction Manual
3103 Single Hole Lavatory Set, 3103, Single Hole Lavatory Set, Hole Lavatory
Set, Lavatory Set
---|---