CMTECK AS16 Microphone Boom Arm Instruction Manual

June 1, 2024
CMTECK

CMTECK AS16 Microphone Boom Arm

AS16 Microphone Boom Arm Instruction

AS16
BOOM ARM is engineered to elevate your microphone setup to studio-grade quality, crafted to blend seamlessly into your space while oering unparalleled functionality.
Simply attach your mic and let your voice take center stage.

Register today
3 minutes to register your
2 years extended warranty

  • Please email us at vip@cmteck.com
  • Title your email: Warranty& Order ID or send your order screenshot

(Order ID should be XXX-XXXXXXX-XXXXXXX )

TECHNICAL SPECIFICATIONS

Boom Type: Tube-style
Max Weight Hold: 4.4lbs
Threading: Standard 3/8″ threading, with 3/8″ to 5/8″ adapter  3/8″ to 1/4″

and axed
Cable Management:| Hidden-channel cable management
Max Horizontal Reach:| 730mm

SETTING UP BOOM ARM

CMTECK AS16 Microphone Boom Arm - SETTING UP BOOM ARM

❶ Boom arm
❷ Extension riser(150mm)
❸ Extension riser(75mm)
❹ C-clamp
❺ Ball head
❻ 6mm hex key wrench| ❼ 3mm hex key wrench
❽ 3/8″ to 5/8″ adapter
❾ 3/8″ to 1/4″ adapter
❿ Locking nut
⓫ Microphone clip
⓬ Cable ties
---|---

STEP1: MOUNT THE BOOM ARM TO YOUR DESKTOP

  1. Unscrew the C-clamp and glide it along the edge of your desktop, ensuring that both the upper and lower suaces of the C-clamp are rmly seated on at suaces. Avoid using suaces with excessively rounded or overhanging edges for mounting.
  2. Tighten the lower section of the C-clamp until it is securely fastened. CMTECK AS16 Microphone Boom Arm - MOUNT THE BOOM

STEP2: INSERT THE BOOM ARM INTO THE C-CLAMP
Lower the boom arm into the C-clamp, ensuring a secure t and smooth rotation in both directions.CMTECK AS16 Microphone Boom Arm -
STEP2 USING THE EXTENSION RISERS
We have equipped this boom arm with two extension risers. Adjust the height as needed by utilizing the extension risers based on your usage scenario.CMTECK
AS16 Microphone Boom Arm - USING THE EXTENSION RISERS STEP3: CONNECTING A MICROPHONE
The thread on the Ball Head of the boom arm is US standard female 3/8″. If your microphone has a 3/8″ female thread on the bottom, you can use it with a direct connection.
Additional adapters (3/8″ to 5/8″ adapter, 3/8″ to 1/4″ adapter and microphone clip) are provided for connecting your devices.CMTECK AS16 Microphone Boom
Arm - CONNECTING A MICROPHONE STEP4: ADJUSTABLE JOINT DAMPING
After the microphone is securely attached to the AS-16 boom arm position the microphone to its desired location.
Rotate the screw clockwise to increase the tension of the internal springs—which may be necessa for heavier devices.CMTECK AS16 Microphone Boom
Arm - ADJUSTABLE JOINT DAMPING STEP5: CABLE MANAGEMENT
There are two hidden channel designed on the boom arm. Connect your microphone cable to the mic, tuck the microphone cable into the hidden channel, and then secure it.CMTECK AS16 Microphone Boom Arm - CABLE
MANAGEMENT

****www.cmteck.com
suppo@cmteck.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals