SOPHIA BXTILED30B LED Lighting with Sensor and Battery User Manual

SOPHIA BXTILED30B LED Lighting with Sensor and Battery

Product Information

Technical Specifications

• LED lighting with motion sensor
• Aluminum body
• Double-sided tape for mounting
• USB-A to USB-C Cable included

Product Usage Instructions

Turning On and Changing Lighting Modes
Press the side button for 3 seconds to turn on the light.

Press the side button for 1 second to change the lighting mode:

1. NIGHT MODE: Blue light flashing 6 times. Light only turns on at night.
2. DAY MODE: Red light flashing 6 times. Light  turns on when motion is detected.
3. FIXED MODE: No light emitted. Light remains steady for use as a torch.

To turn the light off, press the side button for 3 seconds.

Charging
Connect the provided micro USB charging cable to a computer or power source with a USB A port. Different lights indicate charging status.

Safety Precautions

1. This product uses a rechargeable battery.
2. Avoid installing in damp locations.
3. Avoid exposure to high temperatures or direct sunlight.
4. Do not install lights too close together to prevent interference.
5. Away from fire and water to prevent leakage or explosion.

FAQ

1. Q: What should I do if the light does not turn on?
   A: Make sure the battery is charged and try pressing the side button for 3 seconds to turn it on.

2. Q: How long does the battery last on a full charge?
   A: The battery life varies based on usage, but typically lasts several hours on a full charge.

Technical specifications

• Power: 2W
• Input: 3.7V
• Battery: Lithium battery
• Battery capacity: 1.200mAh
• Brightness: 150 lumens
• Colour temperature: 4.000K
• Number of LEDs: 40 pcs
• Sensor type: Motion sensor
• Sensor range: 120°
• Range distance: 5 m
• Lifetime: 50.000h
• Charging port: USB-A to USB-C
• Charging time: 4-5h
• Material: White painted aluminium + ABS
• Dimensions: 31,5 x 4 x 0,9 cm

Contents

• 1 x LED lighting with motion sensor
• 2 x Metal parts with adhesive
• 1 x USB-A to USB-C Cable
• User manual

Diagram

1. Motion sensor and indicator
2. LED Light
3. Aluminum body
4. Double-sided tape
5. Button
6. Charging port
7. USB charging cable

Instructions for use

Press the side button for 3 seconds to turn on the light.

Press the side button for 1 second to change the lighting mode:
NIGHT MODE:
The sensor will emit a blue light flashing 6 times. Once this mode is activated, the light will only turn on at night. It will not turn on during the day.

DAY MODE:
The sensor will emit a red light flashing 6 times. Once this mode is activated, the light will only turn on when motion is detected.

FIXED MODE:
The sensor will not emit any light. Once this mode is activated, the light remains steady and can be used as a torch. Press the side button for 3 seconds to turn the light off.

Charging
Connect the micro USB charging cable included with the product to a computer or power source with a USB A port.

Different lights will illuminate depending on the charging status:

• Charging: a steady red light will illuminate.
• Charging complete: the steady red light will change to blue. This indicates that charging is complete.
• Low current protection: if the voltage connected to the light is below 2.7V, the red light and blue light will flash 6 times at the same time and the light will turn off.

Installation

• Secure the 2 metal parts with adhesive on the back of the strip designed for this purpose (they should be fixed like magnets).
• Find a flat surface and clean that area for better adhesion.
• Carefully remove the protective film from the adhesives on both metal parts and attach the light to the desired surface.
• Separate the light from the metal parts to charge the light, clean it or transport it as a torch.

Safety precautions

1. This product is powered by rechargeable battery.
2. Do not install this product in damp locations.
3. Do not expose the product to high temperatures or direct sunlight. It may affect the proper operation of the product.
4. Do not install two lights too close together. The illumination of one light may affect the operation of the other light.
5. Keep the product away from fire and water to avoid the risk of leakage or explosion.

Maintenance recommendations

• Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
• If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.

Safety information

Please read the following instructions before using the device for the first time:

• When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
• If the product is wet or damaged do not us it.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot weather)
• Do not throw the product into fire.
• Keep the product away from children.
• Disconnect or switch off the product if you are not going to use for a long period of time.
• Do not use the device if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.
• Do not dismount or modify the product. These actions will invalidate the Warranty.

Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product. For electronical devices with Bluetooth: Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
• If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• For more information, contact the retailer or the local authorities in charge of waste management.

Warranty
The 3- year warranty does not apply to products containing consumable parts or components subject to wear and tear, except in case of material or manufacturing defects.

CE Declaration of Conformity

We hereby declare that the product (s) listed below satisfies the provision for CE-marking according to the following European directive(s):
EMC Directive – 2014/30/EU
EN 55015:2013+A1:2015
EN 61547:2009
EN 61000-3-2:2014
EN 61000-3-3:2013
Article: BXTILED30B – BXTILED60B
EAN: 8427542122861 – 8427542122878

Technical specifications:
Input: 5V, 0.9W

Manufacturer:
ATLANTIS INTERNACIONAL, S.L.

Address:
Carrer del Crom, 53, 08907 L’Hospitalet de Llobregat, Barcelona (Spain)

Place and date of the declaration:
L’Hospitalet de Llobregat, April, 6th 2022

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>