Lecdura 836 Crystal Glass Aroma Diffuser User Manual

Lecdura 836 Crystal Glass Aroma Diffuser

PRODUCT OVERVIEW

This aroma diffuser uses ultrasonic waves to instantly vaporize water and essential oil in the tank, to produce a cool, moist fragrant mist.

ILLUSTRATION

Function indication of aroma diffuser button:

• Press the first time —- Turn ON the mist and light.

• Press the second time —- Turn OFF the light

• Press the third lime —- Turn OFF the power.
  Auto-shut-off when water runs out.
  Note: There are two versions of this machine.

• Basic version : Without the battery, it can only work with USB cable.

• Advanced version: With the rechargeable battery, it takes about 3.5 hours to fully charge, which can last for 2 hours, A charging cord is included. Note: It needs to be fully charged for wireless use!.

For the advanced version, the red light flashes while charging.

• When fully charged, the light will turn green and will not go out (Only turn off the green light by unplugging the power).
• The diffuser can be used during charging while the light changes colorfully.
• When using wirelessly, the diffuser doesn’t work and the green light flashes 5 times, which indicates that the power is low and needs to be charged, If after charging still doesn’t work, try replacing the adapter.

SPECIFICATIONS

• Product size P117x128mm
• Weight Approx. 540g
• Power: Input/Output AC100-240V 50/60Hz / DC 5V/1A
• Tank capacity B0ML
• LED light Colorful light
• Materials WOOD+GLASS
• Noise Level (dB) S35 dB
• Method of mist production Ultrasonic vibration at approx. 3.5MHz
• Power 3.5W
• Battery capacity(Advanced version) 3400mAh

HOW TO USE

1. Connect the DC jack to the bottom via cable guide.
2. Remove the cover.
3. Add water and essential oil.

4. Cover with the lid.
5. Connect the USB cable with family user power supply socket or with your computer.
6. Power on.

CLEANING AND STORAGE

Periodic maintenance is necessary to maintain the safety of this machine. Follow the care instructions below. You should clean and maintain the unit after each 5 to 6 time uses, or every 2 to 3 days, as a guideline.

1. Remove the USB cable from the diffuser, hold the base with one hand, hold the water tank cover with the other, lift it upwards, and open the water tank cover (as shown below).

2. Drain the remaining water in the water tank.

3. Wipe using a cloth dripped in mild detergent dissolved in warm water and wrung well. Use a cotton ball to care for the ultrasonic plate on the bottom of the water tank. Use a cloth or cotton ball to care for the unit cover. Caution: Don’t directly touch or apply a strong force to the ultrasonic plate on the bottom center of the water tank.

4. After you have cleaned the water tank, add tap water to it and operate the timer for 30 minutes. Drain, wipe dry and then dry thoroughly.

5. To remove essential oil or dirt adhered to the outside of the unit cover or water tank, wipe with a cloth that has been dipped in mild detergent dissolved in warm water and wrung well.

6. lf dirt accumulates near the nozzle, remove the unit cover and tank cover and wash with mild kitchen detergent. Hold the tank cover and shake to remove the water inside, naturally dry before next use.

7. Make sure that no hair or dust is on the air intake filter on the bottom. Use your hand or a cotton swab to remove any hair or dust. Caution: The filter cover cannot be removed.
   Caution: Always use mild detergent to clean. Chlorine, acid and enzyme- type detergents remaining inside pose the danger of emitting noxious gases. If mist emission is interrupted during use, use a cotton swab to clean the vent of the ultrasonic plate nozzle and the air intake.

SAFETY INFORMATION

Please read and follow these instructions, be ware of all warnings, and keep this document for future reference.

• Set up your product in accordance with product manual and place your product in a stable location or it will fall and cause product damage or bodily harm.
• Prohibition: Do not place on an uneven surface, a high location such as a shelf, or an unstable location. Water spilled when the unit is knocked over them may result in damage to the unit and injury.
• Do not insert or remove the power cable with wet hands. Do not use your product near water, immerse the unit or power cable in water or get it wet. Doing so may cause an electric shock or injury.
• Don1 blocking the mist nozzle, upper and lower vents, or slots to prevent electric shock or fire hazards. Maintain a minimum distance of 15cm (6 inches) around the product for proper ventilation. Do not cover ventilation openings with items like tablecloths or curtains, as this can impede airflow and potentially cause a fire.
• Do not use your product near heat sources(e.g.radiators, heat registers, stoves, open flame, such as lighted candles, or other heat producing devices, such as audio amplifiers or TVs).
• Do not use power cable near heat resources, Do not damage, bend, pull or twist the power cord of the power cable excessively. Doing so may damage the power cord and may cause fire or electric shock.
• Do not use the power cord of the USB cable or plug when it is damaged or when receptacle of the outlet is loose. Doing so may cause electric shock, short circuit or spark a flame.
• If you notice any abnormal smells, sounds, excessive heat, or the mist stops working, immediately disconnect the USB cable from the outlet and stop using the unit to prevent fire or electric shock hazards.
• All servicing and repair must be operated by qualified service personnel. Seek professional assistance if your product is not functioning properly, if the power cord/plug is damaged, or other problems.
• Please do not disassemble and make any modifications to the product, this may lead to electric shock, fire or electric leakage

PRECAUTIONS

• Turn off all functions and unplug the power cable before moving the unit, or it may result in malfunction, fire, electric shock or injury.
• Use the product in an environment within the temperature of 0″C – 40″C.
• Do not touch, damage or push the ultrasonic plate directly with your hand. Doing so may cause an accident or malfunction.
• Remove the power cable from the outlet when product is not in use.
• Since the unit cover is not fixed to the unit, always hold the bottom of the unit to move the machine . If not, it may fall or knocked off.
• Do not use the product in your car.
• Place the product in an appropriate location to prevent injury to children.
• This is not toy, children under 8 are forbidden to use.
• Deterioration of insulation may lead to fire due to electrical leakage or electric shock
• Remove dust from the power source plug regularly.
• Dust accumulation and humidity may cause insulation failure which results in fire, electric shock or malfunction.
• Draining direction — Follow the instructions in the User’s Manual for proper cleaning method and draining direction.
• If drained in an incorrect direction, water may enter the unit’s electrical area inside and cause fire, electric shock, or a short circuit
• The temperature of the unit may be high during use and after it stops.

WARM TIPS

• Clean the tank interior at lease every 2 to 3 days and clean water and tools before use. Use without cleaning may result in the adhesion of water scale or mineral which hamper performance.
• Do not exceed the MAX line when filling water(The temperature of adding water is greater than 15°C and don’t use the boiling water).
• Keep the upper and lower vents from being blocked.
• RegulaMy clean the ceramic atomizer in the center of the diffuser to ensure that it is not blocked, otherwise there will be no fog.
• Please keep the indoor air circulation, do not use it in a small space or a confined space, otherwise it will cause water residue on the table.
• Avoid any water flowing into the exterior air inlet when adding / cleaning the tank, which could cause that the diffuser doesn’t work!
• Do not remove the unit cover to add water during operation. If you want to do so, turn off the power first. If not, water and oil may be emitted and result in machine malfunction or damage to surrounding items, fire or electric shock.

TROUBLESHOOTING

Please refer to the below in the event of the product operating abnormally.

No worry about return &replacement

1. If you received a defective item or the item does not work, please email us, we will support replacement. No need t o return to store!
2. lf you are not satisfied with our item, please email us, we will give you 100% satisfied solution. No need to return to store! & Email us: customerservice@cldiffuser.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>