SUNCO LIGHTING PN12_DU-WH-3550K 1×2 LED Selectable Ceiling Panel User Manual
- June 1, 2024
- Sunco Lighting
Table of Contents
SUNCO LIGHTING PN12_DU-WH-3550K 1×2 LED Selectable Ceiling Panel
What’s in the Box?
Ceiling Panel
Before You Start
Safety Information
To reduce the risk of fire, electric shock, or physical injury:
- Turn off the circuit breaker before installing this fixture.
- Suitable for use in Damp environments at temperatures ranging from -4°F to 113°F.
- Not for use where directly exposed to water.
- Not intended for use with emergency fixtures.
- Not compatible with photo controls.
- Not compatible with occupancy sensors.
- Not compatible with third-party sensors.
- Not compatible with all dimmers. For more dimming information, please visit www.sunco.com.
- Not compatible with timing devices.
- All electrical connections must be under local and National Electric Code (N.E.C.) standards.
- Please review the installation manual carefully before proceeding. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference that may cause undesired operation. Please review all instructions carefully before installation.
WARNING
Cancer & Reproductive Harm
www.P65Warnings.ca.gov
Dimensions
Installation Guide
(STEP 1)
- Turn off the circuit breaker before installation.
- Use screws to attach the mounting bracket to the existing junction box.
- Use with 2.1″, 2.75″, or 3.5″ junction box.
(STEP2)
- If no junction box is present, attach the mounting bracket to the ceiling using (4) plastic anchors and screws.
(STEP 3)
- Clip safety cable from light to mounting bracket for added security.
STEP 4
- Use switches to choose CCT and brightness settings:
- Brightness
- 16W : 1600LM
- 18W: 1800LM
- 20W: 2000LM
- CCT
- 3500K
- 4000K
- 5000K
STEP 5
- Connect supply wires to fixture wires.
- Black to Black (Live); White to White (Neutral); Green to Green(Ground)
STEP 6
- Hold the panel flush against the ceiling, then slide and lock it into place.
- Turn on the circuit breaker and test the light.
Recommended Dimmers
Specifications
Common Troubleshooting
- Feeling in the dark about an issue with your product? No worries! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.
- If you still need some assistance, please feel free to contact us with any questions. Our team of lighting experts is happy to help brighten your day.
Light Distribution Angle
Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area. There are two main types of lighting distribution angles:
- Asymmetric lighting distribution emits light evenly in all directions, creating a cone-shaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter lighting. Symmetric lighting is also used to a certain degree in up-lighting.
- An asymmetric lighting distribution angle, also known as a beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spills in other areas.
- Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more.
- It is important to note that the lighting distribution angle can also be affected by other factors such as the reflector design of the light source, the type of lens used, and the distance between the light source and the surface being illuminated.
Customer Support
Warranty Policy
This product is covered by our industry-leading 7-year warranty. It gets even
better – scan the QR code for 2 extra years of protection!
30-Day Return Policy
At Sunco, we value our customers and stand by the quality and performance of
our products. If you are not completely satisfied with your purchase, we
accept returns within 30 days of your purchase date.
Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your
needs! Contact us at: Email: support@sunco.com
Call or Text: 844-334-9938
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>